From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)
Date: Thu, 2 Jul 2020 10:47:30 +0200 [thread overview]
Message-ID: <20200702084733.2032531-2-sr@denx.de> (raw)
In-Reply-To: <20200702084733.2032531-1-sr@denx.de>
While trying to use the U-Boot xHCI driver on the MIPS Octeon platform,
which is big endian, I noticed that the driver is missing a few endian
conversion calls. This patch adds these missing endian conversion
calls.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
---
drivers/usb/host/xhci-mem.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2d968aafb0..bd959b4093 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -110,7 +110,7 @@ static void xhci_scratchpad_free(struct xhci_ctrl *ctrl)
ctrl->dcbaa->dev_context_ptrs[0] = 0;
- free((void *)(uintptr_t)ctrl->scratchpad->sp_array[0]);
+ free((void *)le64_to_cpu(ctrl->scratchpad->sp_array[0]));
free(ctrl->scratchpad->sp_array);
free(ctrl->scratchpad);
ctrl->scratchpad = NULL;
@@ -225,7 +225,8 @@ static void xhci_link_segments(struct xhci_segment *prev,
prev->next = next;
if (link_trbs) {
val_64 = (uintptr_t)next->trbs;
- prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = val_64;
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr =
+ cpu_to_le64(val_64);
/*
* Set the last TRB in the segment to
@@ -486,7 +487,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id)
byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes);
/* Point to output device context in dcbaa. */
- ctrl->dcbaa->dev_context_ptrs[slot_id] = byte_64;
+ ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64);
xhci_flush_cache((uintptr_t)&ctrl->dcbaa->dev_context_ptrs[slot_id],
sizeof(__le64));
@@ -768,7 +769,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl,
debug("route string %x\n", route);
#endif
- slot_ctx->dev_info |= route;
+ slot_ctx->dev_info |= cpu_to_le32(route);
switch (speed) {
case USB_SPEED_SUPER:
--
2.27.0
next prev parent reply other threads:[~2020-07-02 8:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 8:47 [PATCH v1 0/4] Stefan Roese
2020-07-02 8:47 ` Stefan Roese [this message]
2020-07-16 9:24 ` [PATCH v1 1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu) Stefan Roese
2020-07-16 9:39 ` Bin Meng
2020-07-17 5:15 ` Bin Meng
2020-07-17 9:57 ` Stefan Roese
2020-07-17 11:18 ` Bin Meng
2020-07-17 11:34 ` Stefan Roese
2020-07-17 13:46 ` Bin Meng
2020-07-17 14:04 ` [PATCH v2 " Stefan Roese
2020-07-17 14:14 ` Bin Meng
2020-07-17 18:22 ` Stefan Roese
2020-07-20 1:48 ` Bin Meng
2020-07-21 8:39 ` Stefan Roese
2020-07-02 8:47 ` [PATCH v1 2/4] usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq() Stefan Roese
2020-07-17 5:24 ` Bin Meng
2020-07-17 10:04 ` Stefan Roese
2020-07-17 10:09 ` Bin Meng
2020-07-17 10:11 ` Stefan Roese
2020-07-17 10:13 ` Bin Meng
2020-07-17 11:19 ` Bin Meng
2020-07-02 8:47 ` [PATCH v1 3/4] usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped Stefan Roese
2020-07-17 5:33 ` Bin Meng
2020-07-17 10:08 ` Stefan Roese
2020-07-17 10:11 ` Bin Meng
2020-07-17 11:19 ` Bin Meng
2020-07-02 8:47 ` [PATCH v1 4/4] usb: xhci: Add virt_to_phys() to support mapped platforms Stefan Roese
2020-07-17 5:57 ` Bin Meng
2020-07-17 10:17 ` Stefan Roese
2020-07-17 10:23 ` Bin Meng
2020-07-17 10:28 ` Stefan Roese
2020-07-17 10:29 ` Bin Meng
2020-07-17 10:31 ` Stefan Roese
2020-07-17 11:19 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200702084733.2032531-2-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox