From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 7 Jul 2020 23:05:12 -0400 Subject: [PATCH 7/7] arm: juno: Enable SATA controller In-Reply-To: <20200611110321.9574-8-andre.przywara@arm.com> References: <20200611110321.9574-1-andre.przywara@arm.com> <20200611110321.9574-8-andre.przywara@arm.com> Message-ID: <20200708030512.GF1306@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jun 11, 2020 at 12:03:21PM +0100, Andre Przywara wrote: > The ARM Juno boards (-r1 and -r2) feature a Silicon Image 3132 PCIe > SATA controller soldered on the board, providing two SATA ports. > > Enable the driver and the sata command in the defconfig, to be able to > load images from SATA disks. > > Tested by loading kernels and Grub/EFI from an SSD and successfully > booting a Linux system (with and without using UEFI). > > Signed-off-by: Andre Przywara > Reviewed-by: Linus Walleij Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: