From: Igor Opaniuk <igor.opaniuk@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 12/14] colibri-imx6ull: show boot logo
Date: Wed, 15 Jul 2020 13:31:03 +0300 [thread overview]
Message-ID: <20200715103105.8622-13-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20200715103105.8622-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@toradex.com>
1. Show boot logo embed in U-Boot blob.
2. Drop iomux configration for LCD, and use the one provided in device
tree.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
(no changes since v1)
.../toradex/colibri-imx6ull/colibri-imx6ull.c | 40 ++++---------------
1 file changed, 7 insertions(+), 33 deletions(-)
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index c67d02f7c2..8a34872cab 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -57,32 +57,7 @@ static void setup_gpmi_nand(void)
}
#endif /* CONFIG_NAND_MXS */
-#ifdef CONFIG_VIDEO_MXS
-static iomux_v3_cfg_t const lcd_pads[] = {
- MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_ENABLE__LCDIF_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_HSYNC__LCDIF_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA00__LCDIF_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA01__LCDIF_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA02__LCDIF_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA03__LCDIF_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA04__LCDIF_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA05__LCDIF_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA06__LCDIF_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA07__LCDIF_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA08__LCDIF_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA09__LCDIF_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA10__LCDIF_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA11__LCDIF_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA12__LCDIF_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA13__LCDIF_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA14__LCDIF_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA15__LCDIF_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA16__LCDIF_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA17__LCDIF_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
-};
-
+#ifdef CONFIG_DM_VIDEO
static iomux_v3_cfg_t const backlight_pads[] = {
/* Backlight On */
MX6_PAD_JTAG_TMS__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -95,8 +70,6 @@ static iomux_v3_cfg_t const backlight_pads[] = {
static int setup_lcd(void)
{
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-
imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads));
/* Set BL_ON */
@@ -153,11 +126,6 @@ int board_init(void)
#ifdef CONFIG_NAND_MXS
setup_gpmi_nand();
#endif
-
-#ifdef CONFIG_VIDEO_MXS
- setup_lcd();
-#endif
-
return 0;
}
@@ -203,6 +171,12 @@ int board_late_init(void)
}
#endif /* CONFIG_CMD_USB_SDP */
+#if defined(CONFIG_DM_VIDEO)
+ setup_lcd();
+
+ show_boot_logo();
+#endif
+
return 0;
}
--
2.17.1
next prev parent reply other threads:[~2020-07-15 10:31 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 10:30 [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10 Igor Opaniuk
2020-07-15 10:30 ` [PATCH v2 01/14] imx: mx7: fix DDRC size in A7-M4 mapping table Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers Igor Opaniuk
2020-07-27 12:49 ` Stefano Babic
2020-07-27 13:35 ` Tom Rini
2020-07-27 14:17 ` Stefano Babic
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 03/14] toradex: tdx-cfg-block: add carrier boards and display adapters Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 04/14] toradex: tdx-cfg-block: add support for EEPROM Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 05/14] toradex: tdx-cfg-clock: add migration routine from PID8 Igor Opaniuk
2020-07-27 19:10 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 06/14] toradex: tdx-cfg-block: add carrier board info printing Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 07/14] ARM: dts: imx8mm-verdin: eeprom nodes adjustments Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 08/14] verdin-imx8mm: add EEPROM support for carrier board Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 09/14] ARM: dts: imx6ull-colibri: move u-boot specific node Igor Opaniuk
2020-07-27 19:10 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 10/14] toradex: common: show boot logo Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 11/14] ARM: dts: imx7-colibri: multiple node updates Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` Igor Opaniuk [this message]
2020-07-27 19:09 ` [PATCH v2 12/14] colibri-imx6ull: show boot logo sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 13/14] colibri-imx6ull: fix splash screen logo drawing Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 14/14] colibri-imx7: fix splash " Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-23 15:03 ` [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10 Igor Opaniuk
2020-07-23 15:16 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715103105.8622-13-igor.opaniuk@gmail.com \
--to=igor.opaniuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox