From: Igor Opaniuk <igor.opaniuk@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 01/14] imx: mx7: fix DDRC size in A7-M4 mapping table
Date: Wed, 15 Jul 2020 13:30:52 +0300 [thread overview]
Message-ID: <20200715103105.8622-2-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20200715103105.8622-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@toradex.com>
According to i.MX 7Solo Applications Processor Reference Manual,
2.1.3 Cortex-M4 Memory Map, M4 can address only 1536MB of DDRC
(Start Address: 0x8000_0000; End Address: 0xDFFF_FFFF).
Correct DDRC size to 0x60000000.
Fixes: c0f037f6("mach-imx: bootaux: elf firmware support")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
(no changes since v1)
arch/arm/mach-imx/mx7/soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 798fe74a3d..9cb61f5c34 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -218,7 +218,7 @@ const struct rproc_att hostmap[] = {
{ 0x00940000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
{ 0x20240000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
{ 0x10000000, 0x80000000, 0x0fff0000 }, /* DDR Code alias */
- { 0x80000000, 0x80000000, 0xe0000000 }, /* DDRC */
+ { 0x80000000, 0x80000000, 0x60000000 }, /* DDRC */
{ /* sentinel */ }
};
#endif
--
2.17.1
next prev parent reply other threads:[~2020-07-15 10:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 10:30 [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10 Igor Opaniuk
2020-07-15 10:30 ` Igor Opaniuk [this message]
2020-07-27 19:09 ` [PATCH v2 01/14] imx: mx7: fix DDRC size in A7-M4 mapping table sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 02/14] toradex: tdx-cfg-block: add EEPROM read/store wrappers Igor Opaniuk
2020-07-27 12:49 ` Stefano Babic
2020-07-27 13:35 ` Tom Rini
2020-07-27 14:17 ` Stefano Babic
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 03/14] toradex: tdx-cfg-block: add carrier boards and display adapters Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 04/14] toradex: tdx-cfg-block: add support for EEPROM Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 05/14] toradex: tdx-cfg-clock: add migration routine from PID8 Igor Opaniuk
2020-07-27 19:10 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 06/14] toradex: tdx-cfg-block: add carrier board info printing Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 07/14] ARM: dts: imx8mm-verdin: eeprom nodes adjustments Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:30 ` [PATCH v2 08/14] verdin-imx8mm: add EEPROM support for carrier board Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 09/14] ARM: dts: imx6ull-colibri: move u-boot specific node Igor Opaniuk
2020-07-27 19:10 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 10/14] toradex: common: show boot logo Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 11/14] ARM: dts: imx7-colibri: multiple node updates Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 12/14] colibri-imx6ull: show boot logo Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 13/14] colibri-imx6ull: fix splash screen logo drawing Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-15 10:31 ` [PATCH v2 14/14] colibri-imx7: fix splash " Igor Opaniuk
2020-07-27 19:09 ` sbabic at denx.de
2020-07-23 15:03 ` [PATCH v2 00/14] toradex: imx: fixes and updates for v2020.10 Igor Opaniuk
2020-07-23 15:16 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715103105.8622-2-igor.opaniuk@gmail.com \
--to=igor.opaniuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox