From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver
Date: Wed, 29 Jul 2020 09:43:03 -0400 [thread overview]
Message-ID: <20200729134303.GI6965@bill-the-cat> (raw)
In-Reply-To: <20200619111717.29291-2-Mark-MC.Lee@mediatek.com>
On Fri, Jun 19, 2020 at 07:17:16PM +0800, MarkLee wrote:
> The sgmii mode init flow is almost the same for all mediatek SoC, the
> only difference is the register offset(SGMSYS_GEN2_SPEED) is 0x2028
> in the old chip(mt7622) but changed to 0x128 for the newer chip(mt7629
> and the following chips).
>
> Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/21ed2a67/attachment.sig>
next prev parent reply other threads:[~2020-07-29 13:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-19 11:17 [U-boot,V2,0/2] Enable mt7531 switch support for MT7629 MarkLee
2020-06-19 11:17 ` [U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver MarkLee
2020-07-29 13:43 ` Tom Rini [this message]
2020-06-19 11:17 ` [U-boot, V2, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629 MarkLee
2020-07-29 13:43 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200729134303.GI6965@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox