From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 29 Jul 2020 09:43:03 -0400 Subject: [U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver In-Reply-To: <20200619111717.29291-2-Mark-MC.Lee@mediatek.com> References: <20200619111717.29291-1-Mark-MC.Lee@mediatek.com> <20200619111717.29291-2-Mark-MC.Lee@mediatek.com> Message-ID: <20200729134303.GI6965@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jun 19, 2020 at 07:17:16PM +0800, MarkLee wrote: > The sgmii mode init flow is almost the same for all mediatek SoC, the > only difference is the register offset(SGMSYS_GEN2_SPEED) is 0x2028 > in the old chip(mt7622) but changed to 0x128 for the newer chip(mt7629 > and the following chips). > > Signed-off-by: MarkLee Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: