From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 29 Jul 2020 09:44:40 -0400 Subject: [PATCH v4 07/14] pwm: add driver for nexell In-Reply-To: <1594400858-3140-8-git-send-email-stefan_b@posteo.net> References: <1594400858-3140-1-git-send-email-stefan_b@posteo.net> <1594400858-3140-8-git-send-email-stefan_b@posteo.net> Message-ID: <20200729134440.GZ6965@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jul 10, 2020 at 07:07:31PM +0200, Stefan Bosch wrote: > Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: > - Since drivers/pwm/pwm-nexell.c is an adapted version of > s5p-common/pwm.c an appropriately changed version of s5p-common/pwm.c > is used instead. Therefore arch/arm/mach-s5pc1xx/include/mach/pwm.h > copied to arch/arm/mach-nexell/include/mach and s5p-common/Makefile > changed appropriately. > - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where > possible (and similar). > > Signed-off-by: Stefan Bosch Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: