From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH v4 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board
Date: Wed, 29 Jul 2020 09:45:12 -0400 [thread overview]
Message-ID: <20200729134512.GF6965@bill-the-cat> (raw)
In-Reply-To: <1594400858-3140-14-git-send-email-stefan_b@posteo.net>
On Fri, Jul 10, 2020 at 07:07:37PM +0200, Stefan Bosch wrote:
> Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
> - SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/.
> Appropriate line in Makefile removed.
> - cpu.c: '#include <cpu_func.h>' added.
> - arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required
> anylonger.
> - "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to
> arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead
> of drivers/pwm/pwm-nexell.c.
> - s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"'
> removed, is not necessary, error at out-of-tree building.
> '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes
> regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added
> DM_VIDEO support.
> - board/s5p4418/ renamed to board/friendlyarm/
> - All s5p4418-boards except nanopi2 removed because there is no
> possibility to test the other boards.
> - Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi),
> e.g. "config ..." entries moved from/to other Kconfig.
> - "CONFIG_" removed from several s5p4418/nanopi2 specific defines
> because the appropriate values do not need to be configurable.
> - nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv()
> renamed to env_get(), env_get_ulong(), env_set() and env_save(),
> respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore
> appropriate code removed (not necessary for DT-kernels).
> - nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is
> already defined in lib/crc8.c (with different parameters).
> - dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and
> i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the
> appropriate functionality is not supported yet. New mmc-property
> "mmcboost" added.
> s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries
> added.
> - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
> possible (and similar).
>
> Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200729/e7e774b8/attachment.sig>
next prev parent reply other threads:[~2020-07-29 13:45 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 17:07 [PATCH v4 00/14] arm: add support for SoC S5P4418 Stefan Bosch
2020-07-10 17:07 ` [PATCH v4 01/14] arm: add mach-nexell (header files) Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 02/14] arm: add mach-nexell (all files except header files) Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 03/14] gpio: add nexell driver Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 04/14] i2c: " Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 05/14] mmc: " Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 06/14] pinctrl: " Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 07/14] pwm: add driver for nexell Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 08/14] video: add nexell video driver (soc: displaytop) Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 09/14] video: add nexell video driver (soc: mlc, mipi) Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 10/14] video: add nexell video driver (soc: lvds, hdmi) Stefan Bosch
2020-07-29 13:44 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 11/14] video: add nexell video driver (soc: dpc, makefile) Stefan Bosch
2020-07-29 13:45 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 12/14] video: add nexell video driver (display/video driver) Stefan Bosch
2020-07-29 13:45 ` Tom Rini
2020-07-10 17:07 ` [PATCH v4 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board Stefan Bosch
2020-07-29 13:45 ` Tom Rini [this message]
2020-07-10 17:07 ` [PATCH v4 14/14] arm: add (default) config for " Stefan Bosch
2020-07-29 13:45 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200729134512.GF6965@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox