[PATCH] board: tbs2910: Fix video output with existing environments

[Soeren Moch <smoch@web.de>]

Migration to DM_VIDEO changed the output device name (in stout, stderr)
from 'vga' to 'vidconsole'. This also was adapted in the default environment.
However, existing user defined environments still use 'vga'. Enable this
workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video
output also with existing legacy environments.

Signed-off-by: Soeren Moch <smoch@web.de>
---
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: u-boot at lists.denx.de

There was an automatic fix in the original DM_VIDEO conversion for this
case. Apparently this fix was lost on the way to v2020.10-rc1. So we need
to enable this explicitly here.

This patch was created on top of f7d0ae9 ("configs: Resync with
savedefconfig"), directly after v2020.10-rc1.
---
 configs/tbs2910_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index b4eaf9d162..c15a173d91 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -100,6 +100,7 @@ CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_ANSI is not set
 CONFIG_SYS_WHITE_ON_BLACK=y
 # CONFIG_PANEL is not set
+CONFIG_VIDCONSOLE_AS_LCD=y
 CONFIG_I2C_EDID=y
 CONFIG_VIDEO_IPUV3=y
 # CONFIG_GZIP is not set
--
2.17.1