From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Wunderlich Date: Thu, 13 Aug 2020 10:20:43 +0200 Subject: [PATCH v3 0/5] add SATA/AHCI support for BananaPi R64 Message-ID: <20200813082048.19225-1-linux@fw-web.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Frank Wunderlich BananaPi R64 has an SATA socket where an HDD can be connected. I have ported Linux Driver to Uboot and can access my harddrive BPI-R64> scsi scan scanning bus for devices... Target spinup took 0 ms. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq stag pm clo only pmp pio slum part ccc apst Device 0: (0:0) Vendor: ATA Prod.: ST750LM022 HN-M7 Rev: 2AR1 Type: Hard Disk Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512) BPI-R64> ls scsi 0:1 EFI/ 512 BOOTSECT.BAK 1 file(s), 1 dir(s) BPI-R64> this Series is based on 2020.10-rc1 + mt7622 PCIe series [1] + R64 DTS [2] [1] https://patchwork.ozlabs.org/project/uboot/list/?series=194888 [2] https://patchwork.ozlabs.org/project/uboot/list/?series=194922 v2->v3: some changes in ahci-driver based on chunfeng yun's review - alphabetic sort of includes - use reset_ctl_bulk - devfdt_remap_addr_index instead of map_physmem(devfdt_get_addr()) - move ahci_uc_priv to mtk_ahci_priv v1->v2: fix coding styles reported by checkpatch.pl Frank Wunderlich (5): arm: dts: mt7622: add SATA reset constants phy: mtk-tphy: add PHY_TYPE_SATA reset: add basic reset controller for pciesys ahci: mediatek: add ahci driver dts: r64: add sata- and asm_sel nodes arch/arm/dts/mt7622-bpi-r64.dts | 9 ++ arch/arm/dts/mt7622.dtsi | 32 ++++++ drivers/ata/Kconfig | 8 ++ drivers/ata/Makefile | 1 + drivers/ata/mtk_ahci.c | 130 +++++++++++++++++++++++ drivers/clk/mediatek/clk-mt7622.c | 15 +++ drivers/phy/phy-mtk-tphy.c | 105 ++++++++++++++++++ include/dt-bindings/reset/mt7629-reset.h | 5 +- 8 files changed, 304 insertions(+), 1 deletion(-) create mode 100644 drivers/ata/mtk_ahci.c -- 2.25.1