From: "Pali Rohár" <pali@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Date: Wed, 19 Aug 2020 16:19:40 +0200 [thread overview]
Message-ID: <20200819141940.15650-3-pali@kernel.org> (raw)
In-Reply-To: <20200819141940.15650-1-pali@kernel.org>
From: Wilson Ding <dingwei@marvell.com>
Enabled SDIO slot 0 (south bridge) for SD card on
Espressobin board.
Change-Id: I51a2debf9fba276b9c4a2bc6da91328d47f443e3
Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/60945
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
[pali: Define cd-gpios and enable CONFIG_DM_REGULATOR_GPIO]
Signed-off-by: Pali Roh?r <pali@kernel.org>
---
arch/arm/dts/armada-3720-espressobin.dts | 20 ++++++++++++++++++++
configs/mvebu_espressobin-88f3720_defconfig | 1 +
2 files changed, 21 insertions(+)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index f10a953ec5..92eddca6c0 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -67,6 +67,17 @@
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
+
+ vcc_sd_reg0: regulator at 0 {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ states = <1800000 0x1
+ 3300000 0x0>;
+ gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+ };
};
&comphy {
@@ -110,6 +121,15 @@
status = "okay";
};
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <&vcc_sd_reg0>;
+ status = "okay";
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 495faf43a3..933592af88 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -81,3 +81,4 @@ CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SHA1=y
CONFIG_SHA256=y
CONFIG_MVNETA=y
+CONFIG_DM_REGULATOR_GPIO=y
--
2.20.1
next prev parent reply other threads:[~2020-08-19 14:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 14:19 [PATCH 0/2] arm: mvebu: Espressobin: Add support for SD card Pali Rohár
2020-08-19 14:19 ` [PATCH 1/2] mmc: xenon: set signal voltage and max base clock Pali Rohár
2020-08-19 17:58 ` [EXT] " Kostya Porotchkin
2020-08-20 4:58 ` Stefan Roese
2020-08-27 16:28 ` Andre Heider
2020-08-31 13:04 ` Stefan Roese
2020-08-19 14:19 ` Pali Rohár [this message]
2020-08-19 17:57 ` [EXT] [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin Kostya Porotchkin
2020-08-20 4:58 ` Stefan Roese
2020-08-27 16:28 ` Andre Heider
2020-08-31 13:04 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200819141940.15650-3-pali@kernel.org \
--to=pali@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox