From: Frank Wunderlich <linux@fw-web.de>
To: u-boot@lists.denx.de
Subject: [PATCH v3 11/11] arm: dts: mt7623: add USB nodes
Date: Thu, 20 Aug 2020 11:55:45 +0200 [thread overview]
Message-ID: <20200820095545.4643-12-linux@fw-web.de> (raw)
In-Reply-To: <20200820095545.4643-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
This adds USB nodes for MT7623/BPI-R2
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
arch/arm/dts/mt7623.dtsi | 46 ++++++++++++++++++++++++
arch/arm/dts/mt7623n-bananapi-bpi-r2.dts | 16 +++++++++
2 files changed, 62 insertions(+)
diff --git a/arch/arm/dts/mt7623.dtsi b/arch/arm/dts/mt7623.dtsi
index 0452889ef8..b5a802552b 100644
--- a/arch/arm/dts/mt7623.dtsi
+++ b/arch/arm/dts/mt7623.dtsi
@@ -352,6 +352,52 @@
};
};
+ usb1: usb at 1a1c0000 {
+ compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+ reg = <0x1a1c0000 0x1000>, <0x1a1c4700 0x0100>;
+ reg-names = "mac", "ippc";
+ power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy at 1a1c4000 {
+ compatible = "mediatek,mt7623-tphy", "mediatek,generic-tphy-v1";
+
+ reg = <0x1a1c4000 0x0700>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy at 1a1c4800 {
+ reg = <0x1a1c4800 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy at 1a1c4900 {
+ reg = <0x1a1c4900 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ };
+ };
+
+ usb2: usb at 1a240000 {
+ compatible = "mediatek,mt7623-xhci", "mediatek,mtk-xhci";
+ reg = <0x1a240000 0x1000>, <0x1a244700 0x0100>;
+ reg-names = "mac", "ippc";
+ power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>, <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "ref_ck";
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
u3phy2: usb-phy at 1a244000 {
compatible = "mediatek,generic-tphy-v1";
reg = <0x1a244000 0x0700>;
diff --git a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
index bcedcf20f1..ef07369627 100644
--- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
@@ -248,3 +248,19 @@
pinctrl-0 = <&uart2_pins_a>;
status = "okay";
};
+
+&usb1 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
--
2.25.1
prev parent reply other threads:[~2020-08-20 9:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-20 9:55 [PATCH v3 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622> Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 01/11] arm: dts: mt7622: add SATA reset constants Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 02/11] phy: mtk-tphy: add PHY_TYPE_SATA Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 03/11] phy: mtk-tphy: make shared reg optional for v1 Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 04/11] reset: add basic reset controller for pciesys Frank Wunderlich
2020-08-20 10:52 ` Aw: " Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 05/11] ahci: mediatek: add ahci driver Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 06/11] clk: mt7622: add needed clocks for ssusb-node Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 07/11] arm: dts: add watchdog-reboot node for mt7622 Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 08/11] arm: dts: add dts for Bananapi-R64 Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 09/11] arm: dts: mt7622: add sata- and asm_sel nodes Frank Wunderlich
2020-08-20 9:55 ` [PATCH v3 10/11] arm: dts: mt7622: add USB nodes Frank Wunderlich
2020-08-20 9:55 ` Frank Wunderlich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200820095545.4643-12-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox