From: Frank Wunderlich <linux@fw-web.de>
To: u-boot@lists.denx.de
Subject: [PATCH v4 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Date: Thu, 20 Aug 2020 12:58:15 +0200 [thread overview]
Message-ID: <20200820105826.6229-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This series adds Mediatek AHCI driver, makes neccessary phy modifications
creates new dts for bananapi-r64 (because it's a bit different to rfb)
and adds all DTS nodes to get SATA and USB working on mt7622 and mt7623
they are based on top of this:
Add PCIe and its clock support for mt7622
https://patchwork.ozlabs.org/project/uboot/list/?series=194888
and to get USB working (no hard depency, ports get enumerated without it):
usb: xhci: add a member hci_version in xhci_ctrl struct
https://patchwork.ozlabs.org/project/uboot/list/?series=195331
v3->v4:
- fix wrong squashing of pciesys-comment
v2->v3:
- fixed code style suggested by sam
v1->v2:
- made register of phy optional for tphy v1 and remove it in dts
Frank Wunderlich (11):
arm: dts: mt7622: add SATA reset constants
phy: mtk-tphy: add PHY_TYPE_SATA
phy: mtk-tphy: make shared reg optional for v1
reset: add basic reset controller for pciesys
ahci: mediatek: add ahci driver
clk: mt7622: add needed clocks for ssusb-node
arm: dts: add watchdog-reboot node for mt7622
arm: dts: add dts for Bananapi-R64
arm: dts: mt7622: add sata- and asm_sel nodes
arm: dts: mt7622: add USB nodes
arm: dts: mt7623: add USB nodes
arch/arm/dts/Makefile | 1 +
arch/arm/dts/mt7622-bananapi-bpi-r64.dts | 223 +++++++++++++++++++++++
arch/arm/dts/mt7622-rfb.dts | 8 +
arch/arm/dts/mt7622.dtsi | 92 ++++++++++
arch/arm/dts/mt7623.dtsi | 46 +++++
arch/arm/dts/mt7623n-bananapi-bpi-r2.dts | 16 ++
drivers/ata/Kconfig | 8 +
drivers/ata/Makefile | 1 +
drivers/ata/mtk_ahci.c | 128 +++++++++++++
drivers/clk/mediatek/clk-mt7622.c | 56 ++++++
drivers/phy/phy-mtk-tphy.c | 110 ++++++++++-
include/dt-bindings/reset/mt7629-reset.h | 5 +-
12 files changed, 690 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/mt7622-bananapi-bpi-r64.dts
create mode 100644 drivers/ata/mtk_ahci.c
--
2.25.1
next reply other threads:[~2020-08-20 10:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-20 10:58 Frank Wunderlich [this message]
2020-08-20 10:58 ` [PATCH v4 01/11] arm: dts: mt7622: add SATA reset constants Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 02/11] phy: mtk-tphy: add PHY_TYPE_SATA Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 03/11] phy: mtk-tphy: make shared reg optional for v1 Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 04/11] reset: add basic reset controller for pciesys Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 05/11] ahci: mediatek: add ahci driver Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 06/11] clk: mt7622: add needed clocks for ssusb-node Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 07/11] arm: dts: add watchdog-reboot node for mt7622 Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 08/11] arm: dts: add dts for Bananapi-R64 Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 09/11] arm: dts: mt7622: add sata- and asm_sel nodes Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 10/11] arm: dts: mt7622: add USB nodes Frank Wunderlich
2020-08-20 10:58 ` [PATCH v4 11/11] arm: dts: mt7623: " Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200820105826.6229-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox