From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Thu, 27 Aug 2020 15:01:26 +0200 Subject: [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr In-Reply-To: <20200827130128.22389-1-pali@kernel.org> References: <20200824142502.7281-1-pali@kernel.org> <20200827130128.22389-1-pali@kernel.org> Message-ID: <20200827130128.22389-2-pali@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Current loadaddr is not writable on Espressobin and 'loadb' command cause rebooting board. Marvell's U-Boot already set default loadaddr to value 0x06000000 [1] and after this change 'loadb' is working fine. [1] - https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/0a5b159806baa0746b6449920e450498bc269ba7 Signed-off-by: Pali Roh?r --- include/configs/mvebu_armada-37xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index a9ed0a838f..93c05e30cc 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -37,7 +37,7 @@ /* * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_LOAD_ADDR 0x06000000 /* default load adr */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -- 2.20.1