[PATCH 1/2] board: tbs2910: Use recommended distroboot addresses

[Soeren Moch <smoch@web.de>]

According to doc/README.distro fdt_addr must not be set when DTB is not
available from hardware. So remove this entry.

Use address 32MB above the start of DRAM for kernel_addr_r. This way
we likely can avoid the self-relocation of the compressed kernel image
before it decompresses to offset 0x8000 from start of DRAM.

Use address 128MB above the start of DRAM for fdt_addr_r, since this is
the maximum location for the end of the kernel. So we avoid overwriting
the DTB.

Use 512k above that for ramdisk_addr_r. This should be enough for the
DTB, rest of DRAM can be used for initrd.

Place boot script / extlinux.conf at offset 0 / 1MB from start of DRAM.
This space is available for processing in U-Boot.

Signed-off-by: Soeren Moch <smoch@web.de>
---
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Cc: u-boot at lists.denx.de

Recommendations taken from [1].

Distroboot support for the tbs2910 board was added in the v2020.10
merge window. So please pull this in as fix for v2020.10.

Thanks,
Soeren

[1] https://lists.denx.de/pipermail/u-boot/2020-January/398482.html
---
 include/configs/tbs2910.h | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 8092b9edfb..b05034945e 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -85,13 +85,12 @@
 			"bootm 0x10800000 0x10d00000\0" \
 	"console=ttymxc0\0" \
 	"fan=gpio set 92\0" \
-	"fdt_addr=0x13000000\0" \
-	"fdt_addr_r=0x13000000\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"kernel_addr_r=0x10008000\0" \
-	"pxefile_addr_r=0x10008000\0" \
-	"ramdisk_addr_r=0x18000000\0" \
-	"scriptaddr=0x14000000\0" \
+	"kernel_addr_r=0x12000000\0" \
+	"pxefile_addr_r=0x10100000\0" \
+	"ramdisk_addr_r=0x18080000\0" \
+	"scriptaddr=0x10000000\0" \
 	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial\0" \
 	"set_con_hdmi=setenv stdout serial,vidconsole; " \
--
2.17.1