From: Faiz Abbas <faiz_abbas@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi
Date: Wed, 2 Sep 2020 16:48:04 +0530 [thread overview]
Message-ID: <20200902111804.22043-6-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200902111804.22043-1-faiz_abbas@ti.com>
Add platform data and a device structure for the spi device
present on am335x-icev2. This requires moving all omap3_spi
platform data structures and symbols to an omap3_spi.h so that
the board file can access them.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
arch/arm/mach-omap2/am33xx/board.c | 12 +++++
drivers/spi/omap3_spi.c | 70 +--------------------------
include/configs/am335x_evm.h | 4 ++
include/omap3_spi.h | 78 ++++++++++++++++++++++++++++++
4 files changed, 95 insertions(+), 69 deletions(-)
create mode 100644 include/omap3_spi.h
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index a7b56b6bb3..2c2b38721f 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -14,6 +14,7 @@
#include <init.h>
#include <net.h>
#include <ns16550.h>
+#include <omap3_spi.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
@@ -142,6 +143,17 @@ U_BOOT_DEVICES(am33xx_gpios) = {
#endif
};
#endif
+#if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct omap3_spi_plat omap3_spi_pdata = {
+ .regs = (struct mcspi *)AM33XX_SPI_OFFSET,
+ .pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT,
+};
+
+U_BOOT_DEVICE(am33xx_spi) = {
+ .name = "omap3_spi",
+ .platdata = &omap3_spi_pdata,
+};
+#endif
#endif
#if !CONFIG_IS_ENABLED(DM_GPIO)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 08daacf6f0..56cb217486 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -22,82 +22,14 @@
#include <malloc.h>
#include <asm/io.h>
#include <linux/bitops.h>
+#include <omap3_spi.h>
DECLARE_GLOBAL_DATA_PTR;
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
struct omap2_mcspi_platform_config {
unsigned int regs_offset;
};
-/* per-register bitmasks */
-#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
-#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
-#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
-#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
-
-#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
-
-#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
-#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
-#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
-
-#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
-#define OMAP3_MCSPI_CHCONF_POL BIT(1)
-#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
-#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
-#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
-#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
-#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
-#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
-#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
-#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
-#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
-#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
-#define OMAP3_MCSPI_CHCONF_IS BIT(18)
-#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
-#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
-
-#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
-#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
-#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
-
-#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
-#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
-
-#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
-#define MCSPI_PINDIR_D0_IN_D1_OUT 0
-#define MCSPI_PINDIR_D0_OUT_D1_IN 1
-
-#define OMAP3_MCSPI_MAX_FREQ 48000000
-#define SPI_WAIT_TIMEOUT 10
-
-/* OMAP3 McSPI registers */
-struct mcspi_channel {
- unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
- unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
- unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
- unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
- unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
-};
-
-struct mcspi {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned int irqstatus; /* 0x18 */
- unsigned int irqenable; /* 0x1C */
- unsigned int wakeupenable; /* 0x20 */
- unsigned int syst; /* 0x24 */
- unsigned int modulctrl; /* 0x28 */
- struct mcspi_channel channel[4];
- /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
- /* channel1: 0x40 - 0x50, bus 0 & 1 */
- /* channel2: 0x54 - 0x64, bus 0 & 1 */
- /* channel3: 0x68 - 0x78, bus 0 */
-};
-
struct omap3_spi_priv {
struct mcspi *regs;
unsigned int cs;
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 9c4ef369c5..db1a89ad30 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -281,6 +281,10 @@
#endif
/* SPI flash. */
+#if CONFIG_IS_ENABLED(DM_SPI)
+#define AM33XX_SPI_BASE 0x48030000
+#define AM33XX_SPI_OFFSET (AM33XX_SPI_BASE + OMAP4_MCSPI_REG_OFFSET)
+#endif
/* Network. */
/* Enable Atheros phy driver */
diff --git a/include/omap3_spi.h b/include/omap3_spi.h
new file mode 100644
index 0000000000..cae3770583
--- /dev/null
+++ b/include/omap3_spi.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __OMAP3_SPI_H_
+#define __OMAP3_SPI_H_
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
+#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
+#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
+
+#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
+#define OMAP3_MCSPI_CHCONF_POL BIT(1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
+#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
+#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
+#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
+#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
+#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
+#define OMAP3_MCSPI_CHCONF_IS BIT(18)
+#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
+#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
+#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
+#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
+
+#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
+#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
+#define MCSPI_PINDIR_D0_IN_D1_OUT 0
+#define MCSPI_PINDIR_D0_OUT_D1_IN 1
+
+#define OMAP3_MCSPI_MAX_FREQ 48000000
+#define SPI_WAIT_TIMEOUT 10
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+ unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
+ unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
+ unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
+ unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
+ unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned int irqstatus; /* 0x18 */
+ unsigned int irqenable; /* 0x1C */
+ unsigned int wakeupenable; /* 0x20 */
+ unsigned int syst; /* 0x24 */
+ unsigned int modulctrl; /* 0x28 */
+ struct mcspi_channel channel[4];
+ /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+ /* channel1: 0x40 - 0x50, bus 0 & 1 */
+ /* channel2: 0x54 - 0x64, bus 0 & 1 */
+ /* channel3: 0x68 - 0x78, bus 0 */
+};
+
+struct omap3_spi_plat {
+ struct mcspi *regs;
+ unsigned int pin_dir:1;
+};
+#endif
--
2.17.1
next prev parent reply other threads:[~2020-09-02 11:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-02 11:17 [PATCH 0/5] Add spi boot support to am335x-icev2 Faiz Abbas
2020-09-02 11:18 ` [PATCH 1/5] arm: dts: am335x-icev2: Add spi node Faiz Abbas
2020-09-02 11:18 ` [PATCH 2/5] configs: Add spiboot support for am335x Faiz Abbas
2020-09-07 11:29 ` Lokesh Vutla
2020-09-02 11:18 ` [PATCH 3/5] spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent build failures Faiz Abbas
2020-09-07 6:39 ` Lokesh Vutla
2020-09-10 17:59 ` Jagan Teki
2020-09-02 11:18 ` [PATCH 4/5] spi: omap3_spi: Read platform data in ofdata_to_platdata() Faiz Abbas
2020-09-07 12:12 ` Vignesh Raghavendra
2020-09-07 12:13 ` Vignesh Raghavendra
2020-09-02 11:18 ` Faiz Abbas [this message]
2020-09-07 6:38 ` [PATCH 5/5] arm: mach-omap2: am33xx: Add device structure for spi Lokesh Vutla
2020-09-07 7:06 ` Faiz Abbas
2020-09-07 8:18 ` Vignesh Raghavendra
2020-09-07 10:32 ` Faiz Abbas
2020-09-07 12:19 ` Vignesh Raghavendra
2020-09-08 12:26 ` Faiz Abbas
2020-09-11 2:46 ` [PATCH 0/5] Add spi boot support to am335x-icev2 Lokesh Vutla
2020-09-11 4:37 ` Faiz Abbas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200902111804.22043-6-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox