From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Przywara Date: Wed, 30 Sep 2020 17:39:18 +0100 Subject: [PATCH v2 6/6] qemu-arm64: Enable POSITION_INDEPENDENT In-Reply-To: <20200930163918.24995-1-andre.przywara@arm.com> References: <20200930163918.24995-1-andre.przywara@arm.com> Message-ID: <20200930163918.24995-7-andre.przywara@arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Now that PIE works when U-Boot is started from ROM, let's enable CONFIG_POSITION_INDEPENDENT, which allows to load U-Boot also via ARM Trusted-Firmware's fip.bin to DRAM, without tweaking the configuration. To get a writable initial stack, we need to keep the fixed initial stack pointer, which points to DRAM in our case. Signed-off-by: Andre Przywara Reviewed-by: Stephen Warren --- arch/arm/Kconfig | 1 + configs/qemu_arm64_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5ffa84c1d98..8ba73680699 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -22,6 +22,7 @@ config POSITION_INDEPENDENT config INIT_SP_RELATIVE bool "Specify the early stack pointer relative to the .bss section" + default n if ARCH_QEMU default y if POSITION_INDEPENDENT help U-Boot typically uses a hard-coded value for the stack pointer diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig index 31ea2d342fc..4450e7ced42 100644 --- a/configs/qemu_arm64_defconfig +++ b/configs/qemu_arm64_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_QEMU=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_POSITION_INDEPENDENT=y CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_AHCI=y -- 2.17.5