From: Andre Heider <a.heider@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
Date: Fri, 2 Oct 2020 07:50:21 +0200 [thread overview]
Message-ID: <20201002055021.8905-1-a.heider@gmail.com> (raw)
Fix the actual board vendor and ease synching dts files from Linux.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
v3: rebase on master
arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..be67a45870 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -50,8 +50,8 @@
#include "armada-372x.dtsi"
/ {
- model = "Marvell Armada 3720 Community Board ESPRESSOBin";
- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
+ model = "Globalscale Marvell ESPRESSOBin Board";
+ compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 2bfc7171c4..73d69e0388 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -88,14 +88,14 @@ int board_late_init(void)
if (env_get("fdtfile"))
return 0;
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/* If the memory controller has been configured for DDR4, we're running on v7 */
ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
& A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
- emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
+ emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
if (ddr4 && emmc)
env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
/* Bring-up board-specific network stuff */
int board_network_enable(struct mii_dev *bus)
{
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/*
@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
int part_off;
/* Fill SPI MTD partitions for Linux kernel on Espressobin */
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
--
2.28.0
next reply other threads:[~2020-10-02 5:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-02 5:50 Andre Heider [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-09-04 15:33 [PATCH v2 1/3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings Andre Heider
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
2020-10-02 10:56 ` Pali Rohár
2020-10-07 4:57 ` Stefan Roese
2020-10-14 8:16 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201002055021.8905-1-a.heider@gmail.com \
--to=a.heider@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox