[PATCH] mx6: peripheral clock from oscillator

[Jorge Ramirez-Ortiz, Foundries <jorge@foundries.io>]

On 19/10/20, Jorge Ramirez-Ortiz, Foundries wrote:
> On 19/10/20, Fabio Estevam wrote:
> > Hi Jorge,
> > 
> > On Wed, Oct 14, 2020 at 10:07 AM Jorge Ramirez-Ortiz <jorge@foundries.io> wrote:
> > >
> > > In order to be able to run the I2C bus at 400Khz, the chip errata[1]
> > > recommends that the peripheral clock runs out of the 24MHz oscillator.
> > >
> > > [1] Rev 2, 10/2019, ERR007805
> > >
> > > Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
> > > ---
> > >  arch/arm/mach-imx/mx6/soc.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
> > > index e129286065..1da250bbcd 100644
> > > --- a/arch/arm/mach-imx/mx6/soc.c
> > > +++ b/arch/arm/mach-imx/mx6/soc.c
> > > @@ -469,7 +469,7 @@ int arch_cpu_init(void)
> > >         }
> > >
> > >         /* Set perclk to source from OSC 24MHz */
> > > -       if (is_mx6sl())
> > > +       if (is_mx6sl() || is_mx6ull())
> > 
> > According to https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf the
> > mx6solo and mx6dl are also affected by ERR007805.
> 
> ah ok, I'll repost.
> 
> just as background info, this is needed in order for OP-TEE to access
> the EdgeLock SE050 secure element at a decent speed. I couldnt merge
> the support for the imx6ul i2c driver during the last OP-TEE release
> but will try again when I find some time (surely before their next
> release)
> 
> 
> > 
> > These variants should be handled too.

I just reposted but realized I forgot to ammend the patch version. let
me know if you would like me to repost with that corrected or if that
is ok.