From: Igor Opaniuk <igor.opaniuk@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v1 3/7] doc: board: apalis-imx8x: add documentation
Date: Thu, 22 Oct 2020 11:21:39 +0300 [thread overview]
Message-ID: <20201022082143.21170-4-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20201022082143.21170-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@toradex.com>
This documents the u-boot build and deployment procedure.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
doc/board/toradex/apalix-imx8x.rst | 74 ++++++++++++++++++++++++++++++
doc/board/toradex/index.rst | 1 +
2 files changed, 75 insertions(+)
create mode 100644 doc/board/toradex/apalix-imx8x.rst
diff --git a/doc/board/toradex/apalix-imx8x.rst b/doc/board/toradex/apalix-imx8x.rst
new file mode 100644
index 0000000000..ce7dde8d00
--- /dev/null
+++ b/doc/board/toradex/apalix-imx8x.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Apalis iMX8X V1.1A Module
+==========================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Load U-Boot binary using uuu
+- Flash U-Boot binary into the eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ git clone -b toradex_imx_5.4.24_2.1.0 http://git.toradex.com/cgit/imx-atf.git
+ $ cd imx-atf/
+ $ make PLAT=imx8qx bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/blob/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.6.3.bin
+ $ chmod +x imx-seco-3.6.3.bin
+ $ ./imx-seco-3.6.3.bin
+
+Copy the following binaries to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp imx-atf/build/imx8qx/release/bl31.bin .
+ $ cp imx-seco-3.6.3/firmware/seco/mx8qxb0-ahab-container.img mx8qx-ahab-container.imx8_defconfig
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+ $ make apalis-imx8x_defconfig
+ $ make u-boot-dtb.imx
+
+Load the U-Boot Binary Using UUU
+--------------------------------
+
+Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
+
+https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+
+Put the module into USB recovery aka serial downloader mode, connect USB device
+to your host and execute uuu:
+
+.. code-block:: bash
+
+ sudo ./uuu u-boot/u-boot-dtb.imx
+
+Flash the U-Boot Binary into the eMMC
+-------------------------------------
+
+Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
+partition and boot:
+
+.. code-block:: bash
+
+ load mmc 1:1 $loadaddr u-boot-dtb.imx
+ setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ mmc dev 0 1
+ mmc write ${loadaddr} 0x0 ${blkcnt}
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index 16b5a0770d..abba648f86 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -7,6 +7,7 @@ Toradex
:maxdepth: 2
apalix-imx8
+ apalix-imx8x
colibri_imx7
colibri-imx8x
verdin-imx8mm
--
2.17.1
next prev parent reply other threads:[~2020-10-22 8:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 8:21 [PATCH v1 0/7] toradex: add support for Apalis iMX8X WB IT V1.1 module Igor Opaniuk
2020-10-22 8:21 ` [PATCH v1 1/7] ARM: dts: fsl-imx8qxp-apalis: add initial device tree Igor Opaniuk
2020-10-29 16:51 ` Oleksandr Suvorov
2020-12-08 7:59 ` sbabic at denx.de
2020-10-22 8:21 ` [PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support Igor Opaniuk
2020-10-29 16:52 ` Oleksandr Suvorov
2020-11-19 14:27 ` Oliver Graute
2020-12-08 7:58 ` sbabic at denx.de
2020-10-22 8:21 ` Igor Opaniuk [this message]
2020-10-29 16:53 ` [PATCH v1 3/7] doc: board: apalis-imx8x: add documentation Oleksandr Suvorov
2020-12-08 7:58 ` sbabic at denx.de
2020-10-22 8:21 ` [PATCH v1 4/7] imx8: allow overriding memory layout Igor Opaniuk
2020-10-29 16:57 ` Oleksandr Suvorov
2020-12-08 7:59 ` sbabic at denx.de
2020-10-22 8:21 ` [PATCH v1 5/7] apalis-imx8: add implementation for board_mem_get_layout Igor Opaniuk
2020-10-30 15:19 ` Oleksandr Suvorov
2020-12-08 7:59 ` sbabic at denx.de
2020-10-22 8:21 ` [PATCH v1 6/7] apalis-imx8x: " Igor Opaniuk
2020-12-08 7:58 ` sbabic at denx.de
2020-10-22 8:21 ` [PATCH v1 7/7] colibri-imx8x: " Igor Opaniuk
2020-12-08 7:59 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201022082143.21170-4-igor.opaniuk@gmail.com \
--to=igor.opaniuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox