From mboxrd@z Thu Jan 1 00:00:00 1970 From: sbabic at denx.de Date: Mon, 2 Nov 2020 09:08:09 +0100 (CET) Subject: [PATCHv4 9/9] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2 In-Reply-To: <20200902173146.105402-10-sebastian.reichel@collabora.com> Message-ID: <20201102080809.4BB7D82592@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor > series (GE Bx50). It consists of a carrier PCB used in combination > with a Congatec QMX6 SoM. This adds U-Boot support using device model > everywhere and SPL for memory initialization. > Proper configuration is provided as 'ge_b1x5v2_defconfig' and the > combined image u-boot-with-spi.imx can be flashed directly to 1024 > byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can > be loaded separately via USB-OTG using e.g. imx_usb. > Signed-off-by: Sebastian Reichel > Reviewed-by: Tom Rini Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================