From: Oliver Graute <oliver.graute@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v3 0/2] imx: support for conga-QMX8 board
Date: Wed, 4 Nov 2020 16:44:38 +0100 [thread overview]
Message-ID: <20201104154438.GC23897@optiplex> (raw)
In-Reply-To: <20200616142724.11559-1-oliver.graute@kococonnector.com>
On 16/06/20, Oliver Graute wrote:
> Second patch is still needed for booting. Tipps to get rid of that patch would
> be helpfull.
>
> Between u-boot-imx-20200511 and u-boot-imx-20200609 something more is broken,
> I run into this issue:
>
> U-Boot 2020.07-rc3-00002-gbf3f929aa6 (Jun 16 2020 - 14:36:58 +0200)
>
> CPU: NXP i.MX8QM RevB A53 at 1200 MHz
>
> Model: Congatec QMX8 Qseven series
> Board: conga-QMX8
> Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9
> Boot: SD2
> DRAM: 6 GiB
> Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000'
> Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
> MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In: serial at 5a060000
> Out: serial at 5a060000
> Err: serial at 5a060000
> "Synchronous Abort" handler, esr 0x96000004
> elr: 000000008005cf48 lr : 0000000080022f94 (reloc)
> elr: 00000000fff22f48 lr : 00000000ffee8f94
> x0 : fffffffffdaf3540 x1 : 00000000fff2d8a0
> x2 : 0000000000000000 x3 : 0000000000000000
> x4 : 0000000000000000 x5 : fffffffffdaf3540
> x6 : 00000000fff068a8 x7 : 00000000fff3bca0
> x8 : 00000000fdaf3ac0 x9 : 0000000000000008
> x10: 00000000fdaecb30 x11: 00000000fdaefdd0
> x12: 0000000000000000 x13: 0000000000000200
> x14: 00000000fdadebf8 x15: 00000000ffffffff
> x16: 0000000000001080 x17: 0000000000000000
> x18: 00000000fdae4da0 x19: 0000000000000002
> x20: 00000000fff3b000 x21: 000000007fec6000
> x22: 0000000000000000 x23: 0000000000000000
> x24: 0000000000000000 x25: 0000000000000000
> x26: 0000000000000000 x27: 0000000000000000
> x28: 0000000000000000 x29: 00000000fdadfd90
>
> Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)
> Resetting CPU ...
>
> resetting ...
Currently I try to rebase this patch to v2020.10. But still run into
crashes. After some fun with bisect I could blame this commit:
commit 09140113108541b95d340f3c7b6ee597d31ccc73
Author: Simon Glass <sjg@chromium.org>
Date: Sun May 10 11:40:03 2020 -0600
command: Remove the cmd_tbl_t typedef
09140113108541b95d340f3c7b6ee597d31ccc73 BAD
691d719db7183dfb1d1360efed4c5e9f6899095f GOOD
But I assume that I need to fix something on my patch. Perhaps someone
could comment and help me on this.
Best regards,
Oliver
U-Boot 2020.07-rc2-00147-g17a341f285 (Nov 04 2020 - 16:13:36 +0100)
sc_pm_get_clock_rate: resource:507 clk:2: res:3
Could not read CPU frequency: -22
CPU: NXP i.MX8QM RevB A35 at 0 MHz
Model: Congatec QMX8 Qseven series
Board: conga-QMX8
Build: SCFW 494c97f3, SECO-FW d7523fe8, ATF 09c5cc9
Boot: SD2
DRAM: 6 GiB
Device 'gpio at 5d090000': seq 0 is in use by 'gpio at 5d080000'
Device 'gpio at 5d0a0000': seq 1 is in use by 'gpio at 5d090000'
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial at 5a060000
Out: serial at 5a060000
Err: serial at 5a060000
"Synchronous Abort" handler, esr 0x96000004
elr: 000000008005cf54 lr : 0000000080022f94 (reloc)
elr: 00000000fff22f54 lr : 00000000ffee8f94
x0 : fffffffffdaf0e40 x1 : 00000000fff2d89f
x2 : 0000000000000000 x3 : 0000000000000000
x4 : 0000000000000000 x5 : fffffffffdaf0e40
x6 : 00000000fff068f4 x7 : 00000000fff3bca0
x8 : 00000000fdaf1390 x9 : 0000000000000008
x10: 00000000fdaec9a0 x11: 00000000fdaee528
x12: 0000000000000000 x13: 0000000000000200
x14: 00000000fdadebf8 x15: 00000000ffffffff
x16: 0000000000001080 x17: 0000000000000000
x18: 00000000fdae4da0 x19: 0000000000000002
x20: 00000000fff3b000 x21: 000000007fec6000
x22: 0000000000000000 x23: 0000000000000000
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000fdadfd90
Code: aa0503e4 17fffff2 aa0003e5 d2800003 (386368a4)
Resetting CPU ...
resetting ...
prev parent reply other threads:[~2020-11-04 15:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 14:27 [PATCH v3 0/2] imx: support for conga-QMX8 board Oliver Graute
2020-06-16 14:27 ` [PATCH v3] " Oliver Graute
2020-07-16 9:02 ` Stefano Babic
2020-06-16 14:27 ` [PATCH 2/2] hack to boot with 2020.01 Oliver Graute
2020-06-16 15:31 ` Tom Rini
2020-11-04 15:44 ` Oliver Graute [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201104154438.GC23897@optiplex \
--to=oliver.graute@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox