[PATCH] arm: actions: increase SYS_MALLOC_F_LEN

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Mon, Nov 09, 2020 at 07:31:08PM +0530, Amit Singh Tomar wrote:
> after commit 4ab3817ff16a ("clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag")
> Cubieboard7 (based on actions S700 SoC) fails to boot.
> 
> It is due to the fact that the default value of CONFIG_SYS_MALLOC_F_LEN (0x400)
> would not provide enough memory for clock device to probe (before relocation)
> well.
> 
> This commit fixes it, by increasing SYS_MALLOC_F_LEN to value 0x2000.
> 
> Suggested-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Thanks for fixing!

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Regards,
Mani

> ---
>  Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Kconfig b/Kconfig
> index c94b10e9fa72..6dc20ed25b29 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -200,7 +200,7 @@ config SYS_MALLOC_F_LEN
>  	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
>  			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
>  			   ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
> -			   ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI)
> +			   ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL)
>  	default 0x400
>  	help
>  	  Before relocation, memory is very limited on many platforms. Still,
> -- 
> 2.7.4
>