From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manivannan Sadhasivam Date: Mon, 9 Nov 2020 19:48:06 +0530 Subject: [PATCH] arm: actions: increase SYS_MALLOC_F_LEN In-Reply-To: <1604930468-4229-1-git-send-email-amittomer25@gmail.com> References: <1604930468-4229-1-git-send-email-amittomer25@gmail.com> Message-ID: <20201109141806.GL24289@work> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Nov 09, 2020 at 07:31:08PM +0530, Amit Singh Tomar wrote: > after commit 4ab3817ff16a ("clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag") > Cubieboard7 (based on actions S700 SoC) fails to boot. > > It is due to the fact that the default value of CONFIG_SYS_MALLOC_F_LEN (0x400) > would not provide enough memory for clock device to probe (before relocation) > well. > > This commit fixes it, by increasing SYS_MALLOC_F_LEN to value 0x2000. > > Suggested-by: Andre Przywara > Signed-off-by: Amit Singh Tomar Thanks for fixing! Reviewed-by: Manivannan Sadhasivam Regards, Mani > --- > Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Kconfig b/Kconfig > index c94b10e9fa72..6dc20ed25b29 100644 > --- a/Kconfig > +++ b/Kconfig > @@ -200,7 +200,7 @@ config SYS_MALLOC_F_LEN > default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ > ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ > ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ > - ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI) > + ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) > default 0x400 > help > Before relocation, memory is very limited on many platforms. Still, > -- > 2.7.4 >