From: Vignesh Raghavendra <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH] spi: omap3_spi: Fix speed and mode selection
Date: Sun, 29 Nov 2020 12:53:05 +0530 [thread overview]
Message-ID: <20201129072305.17019-1-vigneshr@ti.com> (raw)
McSPI IP provides per CS specific speed and mode selection. Therefore it
is possible to apply these settings only after CS is known. But
set_speed and set_mode can be called without bus being claimed, this
would lead driver to set up wrong CS (or previously used CS).
Fix this by apply set_speed and set_mode only if bus is already claimed.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
drivers/spi/omap3_spi.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 56cb217486..fe73362945 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -37,6 +37,8 @@ struct omap3_spi_priv {
unsigned int mode;
unsigned int wordlen;
unsigned int pin_dir:1;
+
+ bool bus_claimed;
};
static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
@@ -372,6 +374,8 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
writel(conf, &priv->regs->modulctrl);
+
+ priv->bus_claimed = true;
}
static int omap3_spi_claim_bus(struct udevice *dev)
@@ -381,9 +385,12 @@ static int omap3_spi_claim_bus(struct udevice *dev)
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
priv->cs = slave_plat->cs;
- priv->freq = slave_plat->max_hz;
+ if (!priv->freq)
+ priv->freq = slave_plat->max_hz;
_omap3_spi_claim_bus(priv);
+ _omap3_spi_set_speed(priv);
+ _omap3_spi_set_mode(priv);
return 0;
}
@@ -395,6 +402,8 @@ static int omap3_spi_release_bus(struct udevice *dev)
writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
+ priv->bus_claimed = false;
+
return 0;
}
@@ -440,7 +449,8 @@ static int omap3_spi_set_speed(struct udevice *dev, unsigned int speed)
struct omap3_spi_priv *priv = dev_get_priv(dev);
priv->freq = speed;
- _omap3_spi_set_speed(priv);
+ if (priv->bus_claimed)
+ _omap3_spi_set_speed(priv);
return 0;
}
@@ -451,7 +461,8 @@ static int omap3_spi_set_mode(struct udevice *dev, uint mode)
priv->mode = mode;
- _omap3_spi_set_mode(priv);
+ if (priv->bus_claimed)
+ _omap3_spi_set_mode(priv);
return 0;
}
--
2.29.2
next reply other threads:[~2020-11-29 7:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-29 7:23 Vignesh Raghavendra [this message]
2020-12-01 10:15 ` [PATCH] spi: omap3_spi: Fix speed and mode selection Vignesh Raghavendra
2020-12-01 10:19 ` Miquel Raynal
2020-12-23 8:16 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201129072305.17019-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox