[PATCH v1 1/4] imx6: remove not longer supported aristainetos boards

Heiko Schocher
2020-11-30T19:46:02Z

Removed aristainetos2, 2b, 2b-csl. This boards have been
recalled and destroyed.

Adapt board code to remove stuff not needed anymore.

Fix checkpatch warning, remove fdt_high and initrd_high
from default environment.

Signed-off-by: Heiko Schocher <hs@denx.de>
zu remove

---

arch/arm/dts/Makefile | 7 -
.../dts/imx6dl-aristainetos2_4-u-boot.dtsi | 13 -
arch/arm/dts/imx6dl-aristainetos2_4.dts | 51 ---
arch/arm/dts/imx6dl-aristainetos2_4.dtsi | 84 -----
.../dts/imx6dl-aristainetos2_7-u-boot.dtsi | 19 -
arch/arm/dts/imx6dl-aristainetos2_7.dts | 16 -
arch/arm/dts/imx6dl-aristainetos2_7.dtsi | 11 +-
.../dts/imx6dl-aristainetos2b_4-u-boot.dtsi | 13 -
arch/arm/dts/imx6dl-aristainetos2b_4.dts | 50 ---
.../dts/imx6dl-aristainetos2b_7-u-boot.dtsi | 19 -
arch/arm/dts/imx6dl-aristainetos2b_7.dts | 16 -
.../imx6dl-aristainetos2b_csl_4-u-boot.dtsi | 13 -
arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts | 50 ---
.../imx6dl-aristainetos2b_csl_7-u-boot.dtsi | 19 -
arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts | 16 -
.../dts/imx6dl-aristainetos2c_4-u-boot.dtsi | 13 -
arch/arm/dts/imx6dl-aristainetos2c_4.dts | 50 ---
arch/arm/dts/imx6dl-aristainetos2c_7.dts | 2 +-
.../arm/dts/imx6qdl-aristainetos2-common.dtsi | 23 +-
.../arm/dts/imx6qdl-aristainetos2-u-boot.dtsi | 22 --
arch/arm/dts/imx6qdl-aristainetos2.dtsi | 244 -------------
.../dts/imx6qdl-aristainetos2b-u-boot.dtsi | 77 -----
arch/arm/dts/imx6qdl-aristainetos2b.dtsi | 266 --------------
.../imx6qdl-aristainetos2b_csl-u-boot.dtsi | 77 -----
arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi | 248 -------------
arch/arm/dts/imx6qdl-aristainetos2c.dtsi | 12 +-
arch/arm/mach-imx/mx6/Kconfig | 33 --
board/aristainetos/Kconfig | 36 --
board/aristainetos/MAINTAINERS | 29 +-
board/aristainetos/aristainetos.c | 263 +++-----------
board/aristainetos/common/Kconfig | 5 +-
configs/aristainetos2_defconfig | 121 -------
configs/aristainetos2b_defconfig | 115 ------
configs/aristainetos2bcsl_defconfig | 115 ------
configs/aristainetos2c_defconfig | 6 +-
include/configs/aristainetos2.h | 326 +++++++++---------
36 files changed, 249 insertions(+), 2231 deletions(-)
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2_4.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2_4.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2_7.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_4.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_7.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6dl-aristainetos2c_4.dts
delete mode 100644 arch/arm/dts/imx6qdl-aristainetos2.dtsi
delete mode 100644 arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6qdl-aristainetos2b.dtsi
delete mode 100644 arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
delete mode 100644 configs/aristainetos2_defconfig
delete mode 100644 configs/aristainetos2b_defconfig
delete mode 100644 configs/aristainetos2bcsl_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e2e8a5fb7a..457ccfe08f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -643,13 +643,6 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \

ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
dtb-y += \
- imx6dl-aristainetos2_4.dtb \
- imx6dl-aristainetos2_7.dtb \
- imx6dl-aristainetos2b_4.dtb \
- imx6dl-aristainetos2b_7.dtb \
- imx6dl-aristainetos2b_csl_4.dtb \
- imx6dl-aristainetos2b_csl_7.dtb \
- imx6dl-aristainetos2c_4.dtb \
imx6dl-aristainetos2c_7.dtb \
imx6dl-brppt2.dtb \
imx6dl-cubox-i.dtb \
diff --git a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
deleted file mode 100644
index ac7052c7b7..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2-u-boot.dtsi>
-
-&lcd_panel {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp>;
- enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- backlight = <&backlight>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dts b/arch/arm/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index 0157e244ae..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- * parts for 4.3 inch LG display on spi1 port0
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
- model = "aristainetos2 i.MX6 Dual Lite Board 4";
- compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
- lcd_panel: display at 0 {
- compatible = "lg,lg4573";
- spi-max-frequency = <10000000>;
- reg = <0>;
- power-on-delay = <10>;
-
- display-timings {
- 480x800p57 {
- native-mode;
- clock-frequency = <27000027>;
- hactive = <480>;
- vactive = <800>;
- hfront-porch = <10>;
- hback-porch = <59>;
- hsync-len = <10>;
- vback-porch = <15>;
- vfront-porch = <15>;
- vsync-len = <15>;
- hsync-active = <1>;
- vsync-active = <1>;
- };
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4.dtsi
deleted file mode 100644
index be4601b4b2..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- * parts for 4.3 inch LG display on the parallel port and atmel maxtouch
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-
-/ {
- display0: disp0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp>;
-
- port at 0 {
- reg = <0>;
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port at 1 {
- reg = <1>;
- display_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
-};
-
-&i2c3 {
- touch: touch at 4b {
- compatible = "atmel,maxtouch";
- reg = <0x4b>;
- interrupt-parent = <&gpio2>;
- interrupts = <9 8>;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
- pinctrl_ipu_disp: ipudisp1grp {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
- MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
- MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
- MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
- MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
- MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
- MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
- >;
- };
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
deleted file mode 100644
index 25bc562064..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2-u-boot.dtsi>
-/ {
- vdd_panel_reg: regulator-panel {
- compatible = "regulator-fixed";
- regulator-name = "panel_regulator";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-};
-
-&panel0 {
- power-supply = <&vdd_panel_reg>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dts b/arch/arm/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index 0d1e83cb68..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-#include "imx6dl-aristainetos2_7.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
- model = "aristainetos2 i.MX6 Dual Lite Board 7";
- compatible = "fsl,imx6dl";
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi
index 52d6a517a7..ec633b8ed1 100644
--- a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi
+++ b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 board
- * parts for 7 inch LG display connected to the LVDS port and atmel maxtouch
+ * parts for 7 inch LG display connected to the LVDS port
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
@@ -26,15 +26,6 @@
};
};

-&i2c3 {
- touch: touch at 4d {
- compatible = "atmel,maxtouch";
- reg = <0x4d>;
- interrupt-parent = <&gpio2>;
- interrupts = <9 8>;
- };
-};
-
&ldb {
status = "okay";

diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
deleted file mode 100644
index ee02df39c1..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b-u-boot.dtsi>
-
-&lcd_panel {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp>;
- enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- backlight = <&backlight>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_4.dts
deleted file mode 100644
index a48a25c119..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_4.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2b board
- * parts for 4.3 inch LG display on spi1 port1
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2b.dtsi"
-
-/ {
- model = "aristainetos2b i.MX6 Dual Lite Board 4";
- compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
- lcd_panel: display at 0 {
- compatible = "lg,lg4573";
- spi-max-frequency = <10000000>;
- reg = <1>;
- power-on-delay = <10>;
-
- display-timings {
- 480x800p57 {
- native-mode;
- clock-frequency = <27000027>;
- hactive = <480>;
- vactive = <800>;
- hfront-porch = <10>;
- hback-porch = <59>;
- hsync-len = <10>;
- vback-porch = <15>;
- vfront-porch = <15>;
- vsync-len = <15>;
- hsync-active = <1>;
- vsync-active = <1>;
- };
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
deleted file mode 100644
index 0cb4f1974b..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b-u-boot.dtsi>
-/ {
- vdd_panel_reg: regulator-panel {
- compatible = "regulator-fixed";
- regulator-name = "panel_regulator";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-};
-
-&panel0 {
- power-supply = <&vdd_panel_reg>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_7.dts
deleted file mode 100644
index f1496cbfdd..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_7.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-#include "imx6dl-aristainetos2_7.dtsi"
-#include "imx6qdl-aristainetos2b.dtsi"
-
-/ {
- model = "aristainetos2b i.MX6 Dual Lite Board 7";
- compatible = "fsl,imx6dl";
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi
deleted file mode 100644
index 654ac122a1..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b_csl-u-boot.dtsi>
-
-&lcd_panel {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp>;
- enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- backlight = <&backlight>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts
deleted file mode 100644
index bfbb799f20..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2b csl board
- * parts for 4.3 inch LG display on spi1 port1
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2b_csl.dtsi"
-
-/ {
- model = "aristainetos2b csl i.MX6 Dual Lite Board 4";
- compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
- lcd_panel: display at 0 {
- compatible = "lg,lg4573";
- spi-max-frequency = <10000000>;
- reg = <1>;
- power-on-delay = <10>;
-
- display-timings {
- 480x800p57 {
- native-mode;
- clock-frequency = <27000027>;
- hactive = <480>;
- vactive = <800>;
- hfront-porch = <10>;
- hback-porch = <59>;
- hsync-len = <10>;
- vback-porch = <15>;
- vfront-porch = <15>;
- vsync-len = <15>;
- hsync-active = <1>;
- vsync-active = <1>;
- };
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
deleted file mode 100644
index 70d195ecbf..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2b_csl-u-boot.dtsi>
-/ {
- vdd_panel_reg: regulator-panel {
- compatible = "regulator-fixed";
- regulator-name = "panel_regulator";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-};
-
-&panel0 {
- power-supply = <&vdd_panel_reg>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts
deleted file mode 100644
index ecf767da6c..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-#include "imx6dl-aristainetos2_7.dtsi"
-#include "imx6qdl-aristainetos2b_csl.dtsi"
-
-/ {
- model = "aristainetos2b csl i.MX6 Dual Lite Board 7";
- compatible = "fsl,imx6dl";
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
deleted file mode 100644
index 052d51852b..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-#include <imx6qdl-aristainetos2c-u-boot.dtsi>
-
-&lcd_panel {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp>;
- enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- backlight = <&backlight>;
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4.dts b/arch/arm/dts/imx6dl-aristainetos2c_4.dts
deleted file mode 100644
index 142b108ace..0000000000
--- a/arch/arm/dts/imx6dl-aristainetos2c_4.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2c board
- * parts for 4.3 inch LG display on spi1 port1
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- *
- */
-/dts-v1/;
-
-#include "imx6dl-aristainetos2_4.dtsi"
-#include "imx6qdl-aristainetos2c.dtsi"
-
-/ {
- model = "aristainetos2c i.MX6 Dual Lite Board 4";
- compatible = "fsl,imx6dl";
-
-};
-
-&ecspi1 {
- lcd_panel: display at 0 {
- compatible = "lg,lg4573";
- spi-max-frequency = <10000000>;
- reg = <1>;
- power-on-delay = <10>;
-
- display-timings {
- 480x800p57 {
- native-mode;
- clock-frequency = <27000027>;
- hactive = <480>;
- vactive = <800>;
- hfront-porch = <10>;
- hback-porch = <59>;
- hsync-len = <10>;
- vback-porch = <15>;
- vfront-porch = <15>;
- vsync-len = <15>;
- hsync-active = <1>;
- vsync-active = <1>;
- };
- };
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_7.dts
index 35435e1c10..00eec82bf4 100644
--- a/arch/arm/dts/imx6dl-aristainetos2c_7.dts
+++ b/arch/arm/dts/imx6dl-aristainetos2c_7.dts
@@ -11,6 +11,6 @@
#include "imx6qdl-aristainetos2c.dtsi"

/ {
- model = "aristainetos2c i.MX6 Dual Lite Board 7";
+ model = "aristainetos2c+2d i.MX6 Dual Lite Boards 7";
compatible = "fsl,imx6dl";
};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
index 2aa531b1ab..570143694e 100644
--- a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
+++ b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
- * support for the imx6 based aristainetos2 board
+ * support for the imx6 based aristainetos2 boards
* parts common to all versions
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
@@ -13,6 +13,8 @@
/ {
aliases {
eeprom0 = &i2c_eeprom0;
+ eeprom1 = &i2c_eeprom1;
+ eeprom2 = &i2c_eeprom2;
pmic0 = &i2c_pmic0;
};

@@ -250,6 +252,12 @@
};
};

+ i2c_eeprom2: eeprom at 57{
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+
rtc at 68 {
compatible = "st,m41t11";
reg = <0x68>;
@@ -274,6 +282,19 @@
};
};

+&gpio2 {
+ tpm_pp {
+ gpio-hog;
+ output-low;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ };
+ tpm_reset {
+ gpio-hog;
+ output-high;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&gpio6 {
spi_bus_ena {
gpio-hog;
diff --git a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
index c713efd84c..3063f01d70 100644
--- a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
@@ -50,28 +50,6 @@
};
};

-&iomuxc {
- pinctrl-0 = <&pinctrl_gpio &pinctrl_gpio_fix>;
- u-boot,dm-pre-reloc;
-
- pinctrl_gpio_fix: gpiofixgrp {
- /*
- * usdhc2 has a levelshifter on the carrier board Rev. DV1,
- * that will automatically detect the driving direction.
- * During initialisation this isn't working correctly,
- * which causes DAT3 to be driven low towards the SD-card.
- * This causes a SD-card enetring the SPI-Mode
- * and therefore getting inaccessible until next power cycle.
- * As workaround we drive the DAT3 line as GPIO and set it high.
- * This makes usdhc2 unusable in u-boot, but works for the
- * initialisation in Linux
- */
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x20000
- >;
- };
-};
-
&gpio1 {
usdhc_fix {
gpio-hog;
diff --git a/arch/arm/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/dts/imx6qdl-aristainetos2.dtsi
deleted file mode 100644
index 788e13edad..0000000000
--- a/arch/arm/dts/imx6qdl-aristainetos2.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-#include "imx6qdl-aristainetos2-common.dtsi"
-
-/ {
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio>;
-
- LED_blue {
- label = "led_blue";
- gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
- };
-
- LED_green {
- label = "led_green";
- gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
- };
-
- LED_red {
- label = "led_red";
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
-
- LED_yellow {
- label = "led_yellow";
- gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
- };
-
- LED_ena {
- label = "led_ena";
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
- &gpio4 10 GPIO_ACTIVE_HIGH
- &gpio4 11 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
-};
-
-&ecspi4 {
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi4>;
- status = "okay";
- pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-
- flash: m25p80 at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <20000000>;
- reg = <1>;
- };
-};
-
-&gpio7 {
- sd2_driver_ena {
- gpio-hog;
- output-high;
- gpios = <8 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- no-1-8-v;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
- >;
- };
-
- pinctrl_ecspi4: ecspi4grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
- MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
- MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
- MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 /* WP pin */
- >;
- };
-
- pinctrl_gpio: gpiogrp {
- fsl,pins = <
- /* led enable */
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
- /* LCD power enable */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
- /* led yellow */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
- /* led red */
- MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
- /* led green */
- MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
- /* led blue */
- MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
- /* Profibus IRQ */
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
- /* FPGA IRQ currently unused*/
- MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
- /* Display reset because of clock failure */
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
- /* spi bus #2 SS driver enable */
- MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
- /* RST_LOC# PHY reset input (has pull-down!)*/
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
- /* USB_OTG_ID = GPIO1_24*/
- MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x4001b0b0
- /* Touchscreen IRQ */
- MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
- /* PCIe reset */
- MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
- >;
- };
-
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
- MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
- MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- /* SD1 card detect input */
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
- /* SD1 write protect input */
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
- /* SD2 level shifter output enable */
- MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
- /* SD2 card detect input */
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
- /* SD2 write protect input */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
- >;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
deleted file mode 100644
index 88826a2634..0000000000
--- a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-/ {
- chosen {
- u-boot,dm-pre-reloc;
- stdout-path = &uart2;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdog1>;
- };
-};
-
-&uart2 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_gpio {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart2 {
- u-boot,dm-pre-reloc;
-};
-
-&iomuxc {
- u-boot,dm-pre-reloc;
-};
-
-&aips2 {
- u-boot,dm-pre-reloc;
-};
-
-&backlight {
- pwms = <&pwm1 0 300000>;
- default-brightness-level = <2>;
-};
-
-/*
- * allow switching write protect / reset pin by gpio,
- * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
- */
-&gpio2 {
- u-boot,dm-pre-reloc;
-
- wp_spi_nor {
- gpio-hog;
- output-high;
- gpios = <15 GPIO_ACTIVE_HIGH>;
- };
-
- reset_spi_nor {
- gpio-hog;
- output-high;
- gpios = <28 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&gpio4 {
- u-boot,dm-pre-reloc;
-};
-
-&ecspi1 {
- u-boot,dm-pre-reloc;
-};
-
-&flash {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_ecspi1 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b.dtsi
deleted file mode 100644
index 7d92ea2af7..0000000000
--- a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2b board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-#include "imx6qdl-aristainetos2-common.dtsi"
-
-/ {
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio>;
-
- LED_blue {
- label = "led_blue";
- gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- };
-
- LED_green {
- label = "led_green";
- gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
- };
-
- LED_red {
- label = "led_red";
- gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
- };
-
- LED_yellow {
- label = "led_yellow";
- gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- };
-
- LED_ena {
- label = "led_ena";
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
- &gpio4 10 GPIO_ACTIVE_HIGH
- &gpio4 11 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
- pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-
- flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&ecspi4 {
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi4>;
- status = "okay";
-};
-
-&i2c1 {
- tpm at 20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- };
-};
-
-&gpio7 {
- sd2_driver_ena {
- gpio-hog;
- output-high;
- gpios = <8 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
- no-1-8-v;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- /*
- * comment out this line to make the WiFi Eval-Module work in
- * SD-Slot2, and add line:
- * broken-cd;
- * causes 6% CPU load if no WiFi module installed (polling)
- */
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- no-1-8-v;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- /* SS0# */
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
- /* SS1# */
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
- /* SS2# */
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
- /* WP pin NOR Flash */
- MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
- /* Flash nReset */
- MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
- >;
- };
-
- pinctrl_ecspi4: ecspi4grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
- MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
- MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
- >;
- };
-
- pinctrl_gpio: gpiogrp {
- fsl,pins = <
- /* led enable */
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
- /* LCD power enable */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
- /* led yellow */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
- /* led red */
- MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
- /* led green */
- MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
- /* led blue */
- MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
- /* Profibus IRQ */
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
- /* FPGA IRQ currently unused*/
- MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
- /* Display reset because of clock failure */
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
- /* spi bus #2 SS driver enable */
- MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
- /* RST_LOC# PHY reset input (has pull-down!)*/
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
- /* Touchscreen IRQ */
- MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
- /* PCIe reset */
- MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
- /* make sure pin is GPIO and not ENET_REF_CLK */
- MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
- /* SD2 level shifter output enable / SD2 Reset# */
- MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
- >;
- };
-
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
- MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
- MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- /* SD1 card detect input */
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
- /* SD1 write protect input */
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
- /* SD2 card detect input */
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
- /* SD2 write protect input */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
- >;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
deleted file mode 100644
index 8c2ed70075..0000000000
--- a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ or X11
-/*
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- */
-
-/ {
- chosen {
- u-boot,dm-pre-reloc;
- stdout-path = &uart1;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdog1>;
- };
-};
-
-&uart1 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_gpio {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart1 {
- u-boot,dm-pre-reloc;
-};
-
-&iomuxc {
- u-boot,dm-pre-reloc;
-};
-
-&aips1 {
- u-boot,dm-pre-reloc;
-};
-
-&backlight {
- pwms = <&pwm1 0 300000>;
- default-brightness-level = <2>;
-};
-
-/*
- * allow switching write protect / reset pin by gpio,
- * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
- */
-&gpio2 {
- u-boot,dm-pre-reloc;
-
- wp_spi_nor {
- gpio-hog;
- output-high;
- gpios = <15 GPIO_ACTIVE_HIGH>;
- };
-
- reset_spi_nor {
- gpio-hog;
- output-high;
- gpios = <28 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&gpio4 {
- u-boot,dm-pre-reloc;
-};
-
-&ecspi1 {
- u-boot,dm-pre-reloc;
-};
-
-&flash {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_ecspi1 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
deleted file mode 100644
index fa4dadefb6..0000000000
--- a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * support for the imx6 based aristainetos2b-csl board
- *
- * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-#include "imx6qdl-aristainetos2-common.dtsi"
-
-/ {
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio>;
-
- LED_blue {
- label = "led_blue";
- gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- };
-
- LED_green {
- label = "led_green";
- gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
- };
-
- LED_red {
- label = "led_red";
- gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
- };
-
- LED_yellow {
- label = "led_yellow";
- gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- };
-
- LED_blue_2 {
- label = "led_blue2";
- gpios = <&expander 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- LED_green_2 {
- label = "led_green2";
- gpios = <&expander 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- LED_red_2 {
- label = "led_red2";
- gpios = <&expander 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- LED_yellow_2 {
- label = "led_yellow2";
- gpios = <&expander 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- LED_ena {
- label = "led_ena";
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
- &gpio4 10 GPIO_ACTIVE_HIGH
- &gpio4 11 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
- pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-
- flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&ecspi4 {
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi4>;
- status = "okay";
-};
-
-&i2c1 {
- tpm at 20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- };
-};
-
-&gpio7 {
- wlan_reset {
- gpio-hog;
- output-high;
- gpios = <8 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- /* SS0# */
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
- /* SS1# */
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
- /* SS2# */
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
- /* WP pin NOR Flash */
- MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
- /* Flash nReset */
- MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
- >;
- };
-
- pinctrl_ecspi4: ecspi4grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
- MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
- MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
- >;
- };
-
- pinctrl_gpio: gpiogrp {
- fsl,pins = <
- /* led enable */
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
- /* LCD power enable */
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
- /* led yellow */
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
- /* led red */
- MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
- /* led green */
- MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
- /* led blue */
- MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
- /* Profibus IRQ */
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
- /* FPGA IRQ currently unused*/
- MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
- /* Display reset because of clock failure */
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
- /* spi bus #2 SS driver enable */
- MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
- /* RST_LOC# PHY reset input (has pull-down!)*/
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
- /* Touchscreen IRQ */
- MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
- /* PCIe reset */
- MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
- /* make sure pin is GPIO and not ENET_REF_CLK */
- MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
- /* WLAN Module Reset# */
- MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
- >;
- };
-
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- /* SD1 card detect input */
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
- >;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
index ba13d55f41..70c0177d29 100644
--- a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
+++ b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
- * support for the imx6 based aristainetos2c board
+ * support for the imx6 based aristainetos2c+2d boards
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
@@ -79,6 +79,14 @@
};
};

+&gpio7 {
+ eMMC_reset {
+ gpio-hog;
+ output-high;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
@@ -172,6 +180,8 @@
MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0
/* TPM Reset */
MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0
+ /* eMMC Reset# */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
>;
};

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 0646b7369c..9d6c344064 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -128,39 +128,6 @@ config TARGET_APALIS_IMX6
imply CMD_DM
imply CMD_SATA

-config TARGET_ARISTAINETOS2
- bool "aristainetos2"
- depends on MX6DL
- select BOARD_LATE_INIT
- select SYS_I2C_MXC
- select MXC_UART
- select FEC_MXC
- select DM
- imply CMD_SATA
- imply CMD_DM
-
-config TARGET_ARISTAINETOS2B
- bool "Support aristainetos2-revB"
- depends on MX6DL
- select BOARD_LATE_INIT
- select SYS_I2C_MXC
- select MXC_UART
- select FEC_MXC
- select DM
- imply CMD_SATA
- imply CMD_DM
-
-config TARGET_ARISTAINETOS2BCSL
- bool "Support aristainetos2-revB CSL"
- depends on MX6DL
- select BOARD_LATE_INIT
- select SYS_I2C_MXC
- select MXC_UART
- select FEC_MXC
- select DM
- imply CMD_SATA
- imply CMD_DM
-
config TARGET_ARISTAINETOS2C
bool "Support aristainetos2-revC"
depends on MX6DL
diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig
index 2ad3dbd56c..d67002503d 100644
--- a/board/aristainetos/Kconfig
+++ b/board/aristainetos/Kconfig
@@ -1,39 +1,3 @@
-if TARGET_ARISTAINETOS2
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 2
-
-endif
-
-if TARGET_ARISTAINETOS2B
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 3
-
-endif
-
-if TARGET_ARISTAINETOS2BCSL
-
-source "board/aristainetos/common/Kconfig"
-
-config SYS_BOARD
- default "aristainetos"
-
-config SYS_BOARD_VERSION
- default 4
-
-endif
-
if TARGET_ARISTAINETOS2C

source "board/aristainetos/common/Kconfig"
diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS
index b4ca7abb9c..1c3fb3aeb1 100644
--- a/board/aristainetos/MAINTAINERS
+++ b/board/aristainetos/MAINTAINERS
@@ -3,34 +3,11 @@ M: Heiko Schocher <hs@denx.de>
S: Maintained
F: board/aristainetos/
F: include/configs/aristainetos2.h
-F: configs/aristainetos2_defconfig
-F: configs/aristainetos2b_defconfig
-F: configs/aristainetos2bcsl_defconfig
F: configs/aristainetos2c_defconfig
-F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2_4.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts
-F: arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi
-F: arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi
-F: arch/arm/dts/imx6dl-aristainetos2c_4.dts
-F: arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2c_7.dts
F: arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2c.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 14931120f6..6bfaaed666 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -194,87 +194,6 @@ static void enable_lvds(struct display_info_t const *dev)
writel(reg, &iomux->gpr[3]);
}

-static void enable_spi_display(struct display_info_t const *dev)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- int reg;
- s32 timeout = 100000;
-
-#if defined(CONFIG_VIDEO_BMP_LOGO)
- rotate_logo(3); /* portrait display in landscape mode */
-#endif
-
- reg = readl(&ccm->cs2cdr);
-
- /* select pll 5 clock */
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
- | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- writel(reg, &ccm->cs2cdr);
-
- /* set PLL5 to 197994996Hz */
- reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21);
- reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
- writel(reg, &ccm->analog_pll_video);
-
- writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4),
- &ccm->analog_pll_video_num);
- writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240),
- &ccm->analog_pll_video_denom);
-
- reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
- writel(reg, &ccm->analog_pll_video);
-
- while (timeout--)
- if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
- break;
- if (timeout < 0)
- printf("Warning: video pll lock timeout!\n");
-
- reg = readl(&ccm->analog_pll_video);
- reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
- reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
- writel(reg, &ccm->analog_pll_video);
-
- /* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
- reg = readl(&ccm->cs2cdr);
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
- | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
- | (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
- writel(reg, &ccm->cs2cdr);
-
- reg = readl(&ccm->cscmr2);
- reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
- writel(reg, &ccm->cscmr2);
-
- reg = readl(&ccm->chsccdr);
- reg |= (CHSCCDR_CLK_SEL_LDB_DI0
- << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
- reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK;
- reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET);
- reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK;
- reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
- writel(reg, &ccm->chsccdr);
-
- reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
- | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
- | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
- | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
- | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
- | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
- writel(reg, &iomux->gpr[2]);
-
- reg = readl(&iomux->gpr[3]);
- reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
- | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
- << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
- writel(reg, &iomux->gpr[3]);
-}
-
static void setup_display(void)
{
enable_ipu_clock();
@@ -331,25 +250,36 @@ static void setup_board_gpio(void)
setup_one_led("led_blue", LEDST_OFF);
}

-#define ARI_RESC_FMT "setenv rescue_reason setenv bootargs \\${bootargs}" \
- " rescueReason=%d "
-
static void aristainetos_run_rescue_command(int reason)
{
- char rescue_reason_command[80];
+ char rescue_reason_command[20];

- sprintf(rescue_reason_command, ARI_RESC_FMT, reason);
+ sprintf(rescue_reason_command, "setenv rreason %d", reason);
run_command(rescue_reason_command, 0);
}

-static int aristainetos_eeprom(void)
+static int aristainetos_bootmode_settings(void)
{
+ struct gpio_desc *desc;
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned int sbmr1 = readl(&psrc->sbmr1);
+ char *my_bootdelay;
+ char bootmode = 0;
+ int ret;
struct udevice *dev;
int off;
- int ret;
u8 data[0x10];
u8 rescue_reason;

+ /* jumper controlled reset of the environment */
+ ret = gpio_hog_lookup_name("env_reset", &desc);
+ if (!ret) {
+ if (dm_gpio_get_value(desc)) {
+ printf("\nReset u-boot environment (jumper)\n");
+ run_command("run default_env; saveenv; saveenv", 0);
+ }
+ }
+
off = fdt_path_offset(gd->fdt_blob, "eeprom0");
if (off < 0) {
printf("%s: No eeprom0 path offset\n", __func__);
@@ -366,37 +296,26 @@ static int aristainetos_eeprom(void)
if (ret)
return ret;

- ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, 6);
+ ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, sizeof(data));
if (ret) {
printf("%s: Could not read EEPROM\n", __func__);
return ret;
}

- if (strncmp((char *)&data[3], "ReScUe", 6) == 0) {
- rescue_reason = *(uint8_t *)&data[9];
- memset(&data[3], 0xff, 7);
- i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7);
- printf("\nBooting into Rescue System (EEPROM)\n");
- aristainetos_run_rescue_command(rescue_reason);
- run_command("run rescue_load_fit rescueboot", 0);
- } else if (strncmp((char *)data, "DeF", 3) == 0) {
+ /* software controlled reset of the environment (EEPROM magic) */
+ if (strncmp((char *)data, "DeF", 3) == 0) {
memset(data, 0xff, 3);
i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)data, 3);
- printf("\nClear u-boot environment (set back to defaults)\n");
+ printf("\nReset u-boot environment (EEPROM)\n");
run_command("run default_env; saveenv; saveenv", 0);
}

- return 0;
-};
-
-static void aristainetos_bootmode_settings(void)
-{
- struct gpio_desc *desc;
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned int sbmr1 = readl(&psrc->sbmr1);
- char *my_bootdelay;
- char bootmode = 0;
- int ret;
+ if (sbmr1 & 0x40) {
+ env_set("bootmode", "1");
+ printf("SD bootmode jumper set!\n");
+ } else {
+ env_set("bootmode", "0");
+ }

/*
* Check the boot-source. If booting from NOR Flash,
@@ -420,28 +339,27 @@ static void aristainetos_bootmode_settings(void)
env_set("bootdelay", "-2");
}

- if (sbmr1 & 0x40) {
- env_set("bootmode", "1");
- printf("SD bootmode jumper set!\n");
- } else {
- env_set("bootmode", "0");
- }
-
- /* read out some jumper values*/
- ret = gpio_hog_lookup_name("env_reset", &desc);
- if (!ret) {
- if (dm_gpio_get_value(desc)) {
- printf("\nClear env (set back to defaults)\n");
- run_command("run default_env; saveenv; saveenv", 0);
- }
- }
+ /* jumper controlled boot of the rescue system */
ret = gpio_hog_lookup_name("boot_rescue", &desc);
if (!ret) {
if (dm_gpio_get_value(desc)) {
+ printf("\nBooting into Rescue System (jumper)\n");
aristainetos_run_rescue_command(16);
run_command("run rescue_xload_boot", 0);
}
}
+
+ /* software controlled boot of the rescue system (EEPROM magic) */
+ if (strncmp((char *)&data[3], "ReScUe", 6) == 0) {
+ rescue_reason = *(uint8_t *)&data[9];
+ memset(&data[3], 0xff, 7);
+ i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7);
+ printf("\nBooting into Rescue System (EEPROM)\n");
+ aristainetos_run_rescue_command(rescue_reason);
+ run_command("run rescue_xload_boot", 0);
+ }
+
+ return 0;
}

#if defined(CONFIG_DM_PMIC_DA9063)
@@ -497,15 +415,15 @@ static int setup_pmic_voltages(void)
int board_late_init(void)
{
int x, y;
+ int ret;

led_default_state();
splash_get_pos(&x, &y);
bmp_display((ulong)&bmp_logo_bitmap[0], x, y);

- aristainetos_bootmode_settings();
-
- /* eeprom work */
- aristainetos_eeprom();
+ ret = aristainetos_bootmode_settings();
+ if (ret)
+ return ret;

/* set board_type */
if (gd->board_type == BOARD_TYPE_4)
@@ -549,97 +467,9 @@ struct display_info_t const displays[] = {
.vmode = FB_VMODE_NONINTERLACED
}
}
-#if ((CONFIG_SYS_BOARD_VERSION == 2) || \
- (CONFIG_SYS_BOARD_VERSION == 3) || \
- (CONFIG_SYS_BOARD_VERSION == 4) || \
- (CONFIG_SYS_BOARD_VERSION == 5))
- , {
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = NULL,
- .enable = enable_spi_display,
- .mode = {
- .name = "lg4573",
- .refresh = 57,
- .xres = 480,
- .yres = 800,
- .pixclock = 37037,
- .left_margin = 59,
- .right_margin = 10,
- .upper_margin = 15,
- .lower_margin = 15,
- .hsync_len = 10,
- .vsync_len = 15,
- .sync = FB_SYNC_EXT | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }
-#endif
};
size_t display_count = ARRAY_SIZE(displays);

-#if defined(CONFIG_MTD_RAW_NAND)
-iomux_v3_cfg_t nfc_pads[] = {
- MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_gpmi_nand(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* config gpmi nand iomux */
- imx_iomux_v3_setup_multiple_pads(nfc_pads,
- ARRAY_SIZE(nfc_pads));
-
- /* gate ENFC_CLK_ROOT clock first,before clk source switch */
- clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
-
- /* config gpmi and bch clock to 100 MHz */
- clrsetbits_le32(&mxc_ccm->cs2cdr,
- MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
- MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
- MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
- MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
- MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
- MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
-
- /* enable ENFC_CLK_ROOT clock */
- setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
-
- /* enable gpmi and bch clock gating */
- setbits_le32(&mxc_ccm->CCGR4,
- MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
- MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
- MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
-
- /* enable apbh clock gating */
- setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-#else
-static void setup_gpmi_nand(void)
-{
-}
-#endif
-
int board_init(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -648,7 +478,6 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

setup_board_gpio();
- setup_gpmi_nand();
setup_display();

/* GPIO_1 for USB_OTG_ID */
diff --git a/board/aristainetos/common/Kconfig b/board/aristainetos/common/Kconfig
index e26de5144d..945a2c4df9 100644
--- a/board/aristainetos/common/Kconfig
+++ b/board/aristainetos/common/Kconfig
@@ -2,10 +2,7 @@ config SYS_BOARD_VERSION
int "select version of aristainetos board"
help
version of aristainetos board version
- 2 version 2
- 3 version 2b
- 4 version 2bcsl
- 5 version 2c
+ 5 version 2c and 2d

config SYS_I2C_MXC_I2C1
default y
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
deleted file mode 100644
index 35e4b09715..0000000000
--- a/configs/aristainetos2_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SYS_MALLOC_F_LEN=0xe000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_MX6DL=y
-CONFIG_TARGET_ARISTAINETOS2=y
-CONFIG_DM_GPIO=y
-CONFIG_ENV_OFFSET_REDUND=0xE0000
-CONFIG_IMX_HAB=y
-# CONFIG_CMD_DEKBLOB is not set
-# CONFIG_CMD_NANDBCB is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2_4"
-CONFIG_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_ENCRYPTION=y
-CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ari_boot"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_TYPES=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-# CONFIG_CMD_PINMUX is not set
-# CONFIG_CMD_SATA is not set
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="imx6dl-aristainetos2_4 imx6dl-aristainetos2_7"
-CONFIG_DTB_RESELECT=y
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_EARLY=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_GPIO_HOG=y
-CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=3
-CONFIG_SF_DEFAULT_CS=1
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_MII=y
-CONFIG_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_DS1307=y
-CONFIG_DM_SERIAL=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_DM_VIDEO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_DISPLAY=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig
deleted file mode 100644
index d47a074645..0000000000
--- a/configs/aristainetos2b_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SYS_MALLOC_F_LEN=0xe000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_MX6DL=y
-CONFIG_TARGET_ARISTAINETOS2B=y
-CONFIG_DM_GPIO=y
-CONFIG_ENV_OFFSET_REDUND=0xE0000
-CONFIG_IMX_HAB=y
-# CONFIG_CMD_DEKBLOB is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2b_4"
-CONFIG_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_ENCRYPTION=y
-CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ari_boot"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_TYPES=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_PINMUX is not set
-# CONFIG_CMD_SATA is not set
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="imx6dl-aristainetos2b_4 imx6dl-aristainetos2b_7"
-CONFIG_DTB_RESELECT=y
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_EARLY=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_GPIO_HOG=y
-CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_MII=y
-CONFIG_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_DS1307=y
-CONFIG_DM_SERIAL=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_DM_VIDEO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_DISPLAY=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/aristainetos2bcsl_defconfig b/configs/aristainetos2bcsl_defconfig
deleted file mode 100644
index 30139621d8..0000000000
--- a/configs/aristainetos2bcsl_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SYS_MALLOC_F_LEN=0xe000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_MX6DL=y
-CONFIG_TARGET_ARISTAINETOS2BCSL=y
-CONFIG_DM_GPIO=y
-CONFIG_ENV_OFFSET_REDUND=0xE0000
-CONFIG_IMX_HAB=y
-# CONFIG_CMD_DEKBLOB is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2b_csl_4"
-CONFIG_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_ENCRYPTION=y
-CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ari_boot"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_TYPES=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_PINMUX is not set
-# CONFIG_CMD_SATA is not set
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="imx6dl-aristainetos2b_csl_4 imx6dl-aristainetos2b_csl_7"
-CONFIG_DTB_RESELECT=y
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_EARLY=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_GPIO_HOG=y
-CONFIG_DM_GPIO_LOOKUP_LABEL=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_MII=y
-CONFIG_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_DS1307=y
-CONFIG_DM_SERIAL=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_DM_VIDEO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_DISPLAY=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig
index 50cadb749a..f602b6eda1 100644
--- a/configs/aristainetos2c_defconfig
+++ b/configs/aristainetos2c_defconfig
@@ -10,11 +10,10 @@ CONFIG_DM_GPIO=y
CONFIG_ENV_OFFSET_REDUND=0xE0000
CONFIG_IMX_HAB=y
# CONFIG_CMD_DEKBLOB is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_4"
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
-CONFIG_BOOTDELAY=3
+CONFIG_BOOTDELAY=-2
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_ENCRYPTION=y
CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
@@ -51,7 +50,8 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="imx6dl-aristainetos2c_4 imx6dl-aristainetos2c_7"
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_7"
+CONFIG_OF_LIST="imx6dl-aristainetos2c_7"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index 6e8595caad..916bd5a59c 100644
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -13,14 +13,15 @@

#define CONFIG_HOSTNAME "aristainetos2"

+#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONSOLE_DEV "ttymxc1"
+#endif

#define CONFIG_FEC_XCV_TYPE RGMII

/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 28341000
-#define CONFIG_LG4573

#include "mx6_common.h"

@@ -77,6 +78,8 @@
"enable_hab_check=1\0"
#else
#define HAB_EXTRA_SETTINGS \
+ "hab_check_addr=echo HAB check addr always returns " \
+ "true;true\0" \
"hab_check_file_fit=echo HAB check FIT file always returns " \
"true;true\0" \
"hab_check_flash_fit=echo HAB check flash FIT always returns " \
@@ -86,96 +89,12 @@
"enable_hab_check=0\0"
#endif

-#if (CONFIG_SYS_BOARD_VERSION == 3)
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "dead=led led_red on\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
- "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
- "mainboot=echo Booting from SD-card ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
- "${fit_file}\0" \
- "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
- "${fit_addr_r} ${rescue_fit_file}\0"
-#elif (CONFIG_SYS_BOARD_VERSION == 4)
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "dead=led led_red on;led led_red2 on;\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
- "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
- "mainboot=echo Booting from SD-card ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
- "${fit_file}\0" \
- "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
- "${fit_addr_r} ${rescue_fit_file}\0"
-#elif (CONFIG_SYS_BOARD_VERSION == 5)
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "emmcpart=1\0" \
- "emmc_rescue_part=3\0" \
- "emmcdev=1\0" \
- "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
- "dead=led led_red on\0" \
- "mtdids=nor0=spi0.0\0" \
- "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart} " \
- "emmcpart=${emmcpart}\0" \
- "mainboot=echo Booting from eMMC ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${emmcroot} rootfstype=ext4\0 " \
- "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
- "${fit_file}; " \
- "imi ${fit_addr_r}\0 " \
- "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
- "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
-#else
+#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "dead=led led_red on\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
- "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
- "mainboot=echo Booting from SD-card ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
- "${fit_file}\0" \
- "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
- "${fit_addr_r} ${rescue_fit_file}\0"
+ "dead=while true; do; " \
+ "led led_red on; sleep 1;" \
+ "led led_red off; sleep 1;" \
+ "done\0"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -183,17 +102,24 @@
"usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
- "fit_file=/boot/system.itb\0" \
- "rescue_fit_file=/boot/rescue.itb\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
- "uboot=/boot/u-boot.imx\0" \
"uboot_sz=d0000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
+ "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+ "mtdids=nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor)\0" \
+ "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
+ "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
+ "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
+ "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
+ "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} rng_core.default_quality=1000 " \
+ "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
@@ -205,7 +131,7 @@
"sf protect unlock 0 0x1000000;" \
"mw ${loadaddr} 0 0x20000;" \
"env export -t ${loadaddr} serial# ethaddr " \
- "board_type panel addmisc addmiscM addmiscC addmiscD;" \
+ "board_type panel;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
@@ -216,28 +142,62 @@
"loadbootscriptUSBf=" \
"fatload usb 0 ${loadaddr} ${script};\0" \
"bootscriptUSB=echo Running bootscript from usb-stick ...; " \
- "source\0" \
+ "source \0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
+ "source \0" \
"mmcpart=1\0" \
- "mmcrescuepart=3\0" \
"mmcdev=0\0" \
+ "emmcpart=1\0" \
+ "emmcdev=1\0" \
+ "sysnum=1\0" \
+ "rescue_sysnum=0\0" \
+ "rreason=18\0" \
+ "mainboot=echo Booting from eMMC ...; " \
+ "run mainargs addmtd addmisc;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${emmcroot} rootfstype=ext4\0 " \
+ "main_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${fit_file}; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${rescue_fit_file}; " \
+ "imi ${fit_addr_r}\0" \
+ "main_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mainRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
+ "mmcRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "mmc_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
- "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${uboot}\0" \
- "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "imi ${fit_addr_r}\0" \
+ "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} " \
"${fit_addr_r} ${rescue_fit_file}\0" \
+ "imi ${fit_addr_r}\0" \
+ "mmc_load_uboot=run mk_uboot_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${uboot}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
@@ -246,14 +206,19 @@
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
- "rescueargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/ram rw\0 " \
+ "mmc_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
"rescueboot=echo Booting rescue system ...; " \
- "run rescueargs addmtd addmisc;" \
+ "run addmtd addmisc;" \
"if test -n ${rescue_reason}; then run rescue_reason;fi;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"if bootm ${fit_addr_r}; then ; " \
"else " \
@@ -261,50 +226,73 @@
"fi; \0" \
"r_reason_syserr=setenv rescue_reason setenv bootargs " \
"\\\\${bootargs} " \
- "rescueReason=18\0 " \
- "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
- "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
- "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
+ "rescueReason=$rreason\0 " \
+ "usb_load_fit=run mk_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_fitf=run mk_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
- "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
+ "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
+ "usb_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_load_pubkeyf=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usbroot=/dev/sda1 rootwait rw\0" \
"usbboot=echo Booting from usb-stick ...; " \
"run usbargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"usbargs=setenv bootargs console=${console},${baudrate} " \
"root=${usbroot}\0" \
+ "usbRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
"mmc_rescue_boot=" \
"run r_reason_syserr;" \
- "if run mmc_rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run mmc_rescue_load_pubkey hab_check_addr " \
+ "mmc_rescue_load_fit hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
+ "run dead; " \
"fi;\0" \
"main_rescue_boot=" \
- "if run main_load_fit hab_check_flash_fit; then " \
+ "if run main_load_pubkey hab_check_addr " \
+ "main_load_fit hab_check_flash_fit; then " \
"if run mainboot; then ; " \
"else " \
"run r_reason_syserr;" \
- "if run rescue_load_fit hab_check_file_fit;" \
- "then run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi; " \
"else " \
"run r_reason_syserr;" \
- "if run rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi;\0" \
"usb_mmc_rescue_boot=" \
@@ -318,17 +306,21 @@
"hab_check_file_bootscript;" \
"then run bootscriptUSB; " \
"fi; " \
- "if run usb_load_fit hab_check_file_fit; then " \
+ "if run usb_load_pubkey hab_check_addr " \
+ "usb_load_fit hab_check_file_fit; then " \
"run usbboot; " \
"fi; " \
- "if run usb_load_fitf hab_check_file_fit; then " \
+ "if run usb_load_pubkeyf hab_check_addr " \
+ "usb_load_fitf hab_check_file_fit; then " \
"run usbboot; " \
"fi; "\
- "if run usb_load_rescuefit hab_check_file_fit;" \
- "then run r_reason_syserr rescueboot;" \
+ "if run usb_rescue_load_pubkey hab_check_addr " \
+ "usb_load_rescuefit hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf hab_check_file_fit;" \
- "then run r_reason_syserr rescueboot;" \
+ "if run usb_rescue_load_pubkeyf hab_check_addr " \
+ "usb_load_rescuefitf hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"run mmc_rescue_boot;" \
"fi; "\
@@ -338,48 +330,57 @@
"if test ${bootmode} -ne 0 ; then " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
- "if run mmc_rescue_load_fit " \
- "hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run mmc_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "mmc_rescue_load_fit " \
+ "hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
"else " \
"usb start;" \
"if usb storage; then " \
- "if run usb_load_rescuefit " \
- "hab_check_file_fit;"\
- "then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf "\
- "hab_check_file_fit;"\
- "then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"fi;" \
- "run dead; " \
"echo RESCUE SYSTEM ON SD OR " \
"USB BOOT FAILURE;" \
+ "run dead; " \
"else " \
"usb start;" \
"if usb storage; then " \
- "if run usb_load_rescuefit " \
- "hab_check_file_fit; then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf " \
- "hab_check_file_fit; then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
- "run dead; " \
"echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"else "\
- "if run rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi;\0" \
"ari_boot=if test ${bootmode} -ne 0 ; then " \
@@ -388,7 +389,8 @@
"if run loadbootscript hab_check_file_bootscript;" \
"then run bootscript; " \
"fi; " \
- "if run mmc_load_fit hab_check_file_fit; then " \
+ "if run mmc_load_pubkey hab_check_addr " \
+ "mmc_load_fit hab_check_file_fit; then " \
"if run mmcboot; then ; " \
"else " \
"run mmc_rescue_boot;" \
@@ -421,12 +423,6 @@

#define CONFIG_SYS_FSL_USDHC_NUM 2

-/* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
/* DMA stuff, needed for GPMI/MXS NAND support */

/* USB Configs */
--
2.25.4