* [PATCH] powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNT
@ 2020-12-03 3:24 Chris Packham
2020-12-11 7:54 ` Priyanka Jain
0 siblings, 1 reply; 2+ messages in thread
From: Chris Packham @ 2020-12-03 3:24 UTC (permalink / raw)
To: u-boot
If the board isn't strapped to enable USB1 then attempting to access it
will result in a hang. Avoid this by allowing boards to define
CONFIG_USB_MAX_CONTROLLER_COUNT.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
---
arch/powerpc/include/asm/config_mpc85xx.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 4ca1e2b325f1..f25ba1af0928 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -116,7 +116,9 @@
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
--
2.29.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNT
2020-12-03 3:24 [PATCH] powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNT Chris Packham
@ 2020-12-11 7:54 ` Priyanka Jain
0 siblings, 0 replies; 2+ messages in thread
From: Priyanka Jain @ 2020-12-11 7:54 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
>From: Chris Packham <judge.packham@gmail.com>
>Sent: Thursday, December 3, 2020 8:54 AM
>To: u-boot at lists.denx.de
>Cc: Chris Packham <judge.packham@gmail.com>; Andy Fleming
><afleming@gmail.com>; Mario Six <mario.six@gdsys.cc>; Priyanka Jain
><priyanka.jain@nxp.com>; Stefan Roese <sr@denx.de>; Wolfgang Denk
><wd@denx.de>; Y.b. Lu <yangbo.lu@nxp.com>
>Subject: [PATCH] powerpc: mpc85xx: Allow boards to override
>CONFIG_USB_MAX_CONTROLLER_COUNT
>
>If the board isn't strapped to enable USB1 then attempting to access it will
>result in a hang. Avoid this by allowing boards to define
>CONFIG_USB_MAX_CONTROLLER_COUNT.
>
>Signed-off-by: Chris Packham <judge.packham@gmail.com>
>---
<snip>
Applied to fsl-qoriq.
Awaiting upstream
Regards
Priyanka
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-12-11 7:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-03 3:24 [PATCH] powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNT Chris Packham
2020-12-11 7:54 ` Priyanka Jain
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox