From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eugen Hristev Date: Thu, 3 Dec 2020 11:28:35 +0200 Subject: [PATCH 19/34] configs: sama7g5ek: enable mii command In-Reply-To: <20201203092850.7909-1-eugen.hristev@microchip.com> References: <20201203092850.7909-1-eugen.hristev@microchip.com> Message-ID: <20201203092850.7909-20-eugen.hristev@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Claudiu Beznea Enable mii command as ethernet's PHY specific programming is based on it. Signed-off-by: Claudiu Beznea --- configs/sama7g5ek_mmc1_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig index 99e2439516..176f4f3000 100644 --- a/configs/sama7g5ek_mmc1_defconfig +++ b/configs/sama7g5ek_mmc1_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -- 2.25.1