[PATCH v2 00/34] Sama7g5 Evaluation Kit support

Eugen.Hristev at microchip.com
2021-01-07T07:47:46Z

On 05.12.2020 12:02, Eugen Hristev wrote:
> Hello,
>
> This series adds support for sama7g5 SoC DT and the sama7g5ek board.
> I kept the original incremental development for this board, with each
> commit's author and designated change, for traceability and for easier
> reviewing.
>
> The series starts from a basic devicetree and ends with a fully functional
> board including SD-Card/MMC, i2c eeproms, ethernet.
>
> Thanks,
> Eugen
>
> Changes in v2:
> - fixed compatible for i2c eeprom, mac was not read correctly in latest u-boot version
> - fixed some checkpatch warnings and some spacing
>
> Claudiu Beznea (20):
> board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
> configs: sama7g5ek: set malloc pool to 68K
> configs: sama7g5ek: enable pll driver
> ARM: dts: sama7g5: move clock frequencies for xtals in board file
> ARM: dts: sama7g5: add slow rc and main rc oscillators
> ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
> ARM: dts: sama7g5: add slow clock bindings
> ARM: dts: sama7g5: add PMC bindings
> ARM: dts: sama7g5: switch to PMC bindings
> configs: sama7g5: enable CONFIG_CPU
> ARM: dts: sama7g5: add CPU bindings
> configs: sama7g5: use PIT64B
> ARM: dts: sama7g5: enable autoboot
> ARM: dts: sama7g5: add pit64b support
> configs: sama7g5ek: enable mii command
> ARM: dts: sama7g5: add GMAC0
> ARM: dts: sama7g5: add GMAC1
> board: atmel: sama7g5ek: increase arp timeout and retry count
> configs: sama7g5ek: enable support for KSZ9131
> configs: sama7g5ek: enable CCF
>
> Eugen Hristev (13):
> ARM: dts: sama7g5: add initial DT for sama7g5 SoC
> board: atmel: sama7g5ek: add initial support for sama7g5ek
> ARM: dts: at91: sama7g5: add pinctrl node
> ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
> ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
> ARM: dts: at91: sama7g5: add node for sdmmc0
> ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
> board: atmel: sama7g5ek: clean-up header bootcommand
> configs: sama7g5: add mmc config for sdmmc0
> ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
> ARM: dts: sama7g5ek: add i2c1 bus and eeproms
> board: atmel: sama7g5ek: add support for MAC address retreival
> configs: sama7g5ek: add i2c and eeprom
>
> Nicolas Ferre (1):
> ARM: dts: sama7g5ek: fix TXC pin configuration
>
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/sama7g5.dtsi | 170 ++++++++++++++++++++++++
> arch/arm/dts/sama7g5ek-u-boot.dtsi | 65 ++++++++++
> arch/arm/dts/sama7g5ek.dts | 202 +++++++++++++++++++++++++++++
> arch/arm/mach-at91/Kconfig | 8 ++
> board/atmel/sama7g5ek/Kconfig | 15 +++
> board/atmel/sama7g5ek/MAINTAINERS | 8 ++
> board/atmel/sama7g5ek/Makefile | 7 +
> board/atmel/sama7g5ek/sama7g5ek.c | 76 +++++++++++
> configs/sama7g5ek_mmc1_defconfig | 70 ++++++++++
> configs/sama7g5ek_mmc_defconfig | 70 ++++++++++
> include/configs/sama7g5ek.h | 45 +++++++
> 12 files changed, 739 insertions(+)
> create mode 100644 arch/arm/dts/sama7g5.dtsi
> create mode 100644 arch/arm/dts/sama7g5ek-u-boot.dtsi
> create mode 100644 arch/arm/dts/sama7g5ek.dts
> create mode 100644 board/atmel/sama7g5ek/Kconfig
> create mode 100644 board/atmel/sama7g5ek/MAINTAINERS
> create mode 100644 board/atmel/sama7g5ek/Makefile
> create mode 100644 board/atmel/sama7g5ek/sama7g5ek.c
> create mode 100644 configs/sama7g5ek_mmc1_defconfig
> create mode 100644 configs/sama7g5ek_mmc_defconfig
> create mode 100644 include/configs/sama7g5ek.h
>

Applied to u-boot-atmel/master