[PATCH v2 30/34] ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode

Eugen Hristev
2020-12-05T10:03:12Z

Add flexcom1 and i2c subnode.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
arch/arm/dts/sama7g5.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
index 4c571befad..da3c5b2b22 100644
--- a/arch/arm/dts/sama7g5.dtsi
+++ b/arch/arm/dts/sama7g5.dtsi
@@ -121,6 +121,24 @@
status = "okay";
};

+ flx1: flexcom at e181c000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe181c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe181c000 0x800>;
+ status = "disabled";
+
+ i2c1: i2c at 600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ };
+ };
+
uart0: serial at e1824200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xe1824200 0x200>;
--
2.25.1