[PATCH v2 00/34] Sama7g5 Evaluation Kit support

Eugen Hristev
2020-12-05T10:02:42Z

Hello,

This series adds support for sama7g5 SoC DT and the sama7g5ek board.
I kept the original incremental development for this board, with each
commit's author and designated change, for traceability and for easier
reviewing.

The series starts from a basic devicetree and ends with a fully functional
board including SD-Card/MMC, i2c eeproms, ethernet.

Thanks,
Eugen

Changes in v2:
- fixed compatible for i2c eeprom, mac was not read correctly in latest u-boot version
- fixed some checkpatch warnings and some spacing

Claudiu Beznea (20):
board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
configs: sama7g5ek: set malloc pool to 68K
configs: sama7g5ek: enable pll driver
ARM: dts: sama7g5: move clock frequencies for xtals in board file
ARM: dts: sama7g5: add slow rc and main rc oscillators
ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
ARM: dts: sama7g5: add slow clock bindings
ARM: dts: sama7g5: add PMC bindings
ARM: dts: sama7g5: switch to PMC bindings
configs: sama7g5: enable CONFIG_CPU
ARM: dts: sama7g5: add CPU bindings
configs: sama7g5: use PIT64B
ARM: dts: sama7g5: enable autoboot
ARM: dts: sama7g5: add pit64b support
configs: sama7g5ek: enable mii command
ARM: dts: sama7g5: add GMAC0
ARM: dts: sama7g5: add GMAC1
board: atmel: sama7g5ek: increase arp timeout and retry count
configs: sama7g5ek: enable support for KSZ9131
configs: sama7g5ek: enable CCF

Eugen Hristev (13):
ARM: dts: sama7g5: add initial DT for sama7g5 SoC
board: atmel: sama7g5ek: add initial support for sama7g5ek
ARM: dts: at91: sama7g5: add pinctrl node
ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
ARM: dts: at91: sama7g5: add node for sdmmc0
ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
board: atmel: sama7g5ek: clean-up header bootcommand
configs: sama7g5: add mmc config for sdmmc0
ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
ARM: dts: sama7g5ek: add i2c1 bus and eeproms
board: atmel: sama7g5ek: add support for MAC address retreival
configs: sama7g5ek: add i2c and eeprom

Nicolas Ferre (1):
ARM: dts: sama7g5ek: fix TXC pin configuration

arch/arm/dts/Makefile | 3 +
arch/arm/dts/sama7g5.dtsi | 170 ++++++++++++++++++++++++
arch/arm/dts/sama7g5ek-u-boot.dtsi | 65 ++++++++++
arch/arm/dts/sama7g5ek.dts | 202 +++++++++++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 8 ++
board/atmel/sama7g5ek/Kconfig | 15 +++
board/atmel/sama7g5ek/MAINTAINERS | 8 ++
board/atmel/sama7g5ek/Makefile | 7 +
board/atmel/sama7g5ek/sama7g5ek.c | 76 +++++++++++
configs/sama7g5ek_mmc1_defconfig | 70 ++++++++++
configs/sama7g5ek_mmc_defconfig | 70 ++++++++++
include/configs/sama7g5ek.h | 45 +++++++
12 files changed, 739 insertions(+)
create mode 100644 arch/arm/dts/sama7g5.dtsi
create mode 100644 arch/arm/dts/sama7g5ek-u-boot.dtsi
create mode 100644 arch/arm/dts/sama7g5ek.dts
create mode 100644 board/atmel/sama7g5ek/Kconfig
create mode 100644 board/atmel/sama7g5ek/MAINTAINERS
create mode 100644 board/atmel/sama7g5ek/Makefile
create mode 100644 board/atmel/sama7g5ek/sama7g5ek.c
create mode 100644 configs/sama7g5ek_mmc1_defconfig
create mode 100644 configs/sama7g5ek_mmc_defconfig
create mode 100644 include/configs/sama7g5ek.h

--
2.25.1