[PATCH v1 02/50] mips: octeon: Add misc cvmx-helper header files

Stefan Roese
2020-12-11T16:05:24Z

Import misc cvmx-helper header files from 2013 U-Boot. They will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---

.../include/mach/cvmx-helper-agl.h | 68 ++
.../include/mach/cvmx-helper-bgx.h | 335 +++++++
.../include/mach/cvmx-helper-board.h | 558 +++++++++++
.../include/mach/cvmx-helper-cfg.h | 884 ++++++++++++++++++
.../include/mach/cvmx-helper-errata.h | 50 +
.../include/mach/cvmx-helper-fdt.h | 568 +++++++++++
.../include/mach/cvmx-helper-fpa.h | 43 +
.../include/mach/cvmx-helper-gpio.h | 427 +++++++++
.../include/mach/cvmx-helper-ilk.h | 93 ++
.../include/mach/cvmx-helper-ipd.h | 16 +
.../include/mach/cvmx-helper-jtag.h | 84 ++
.../include/mach/cvmx-helper-loop.h | 37 +
.../include/mach/cvmx-helper-npi.h | 42 +
.../include/mach/cvmx-helper-pki.h | 319 +++++++
.../include/mach/cvmx-helper-pko.h | 51 +
.../include/mach/cvmx-helper-pko3.h | 76 ++
.../include/mach/cvmx-helper-rgmii.h | 99 ++
.../include/mach/cvmx-helper-sfp.h | 437 +++++++++
.../include/mach/cvmx-helper-sgmii.h | 81 ++
.../include/mach/cvmx-helper-spi.h | 73 ++
.../include/mach/cvmx-helper-srio.h | 72 ++
.../include/mach/cvmx-helper-util.h | 412 ++++++++
.../include/mach/cvmx-helper-xaui.h | 108 +++
.../mach-octeon/include/mach/cvmx-helper.h | 565 +++++++++++
24 files changed, 5498 insertions(+)
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-board.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-ipd.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-pko.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-util.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-helper.h

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h
new file mode 100644
index 0000000000..7a5e4d89d3
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for AGL (RGMII) initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_AGL_H__
+#define __CVMX_HELPER_AGL_H__
+
+int __cvmx_helper_agl_enumerate(int interface);
+
+int cvmx_helper_agl_get_port(int xiface);
+
+/**
+ * @INTERNAL
+ * Probe a RGMII interface and determine the number of ports
+ * connected to it. The RGMII interface should still be down
+ * after this call.
+ *
+ * @param interface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_agl_probe(int interface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a RGMII interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param interface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_agl_enable(int interface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_agl_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_agl_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+#endif /* __CVMX_HELPER_AGL_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h
new file mode 100644
index 0000000000..ead6193ec0
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h
@@ -0,0 +1,335 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions to configure the BGX MAC.
+ */
+
+#ifndef __CVMX_HELPER_BGX_H__
+#define __CVMX_HELPER_BGX_H__
+
+#define CVMX_BGX_RX_FIFO_SIZE (64 * 1024)
+#define CVMX_BGX_TX_FIFO_SIZE (32 * 1024)
+
+int __cvmx_helper_bgx_enumerate(int xiface);
+
+/**
+ * @INTERNAL
+ * Disable the BGX port
+ *
+ * @param xipd_port IPD port of the BGX interface to disable
+ */
+void cvmx_helper_bgx_disable(int xipd_port);
+
+/**
+ * @INTERNAL
+ * Probe a SGMII interface and determine the number of ports
+ * connected to it. The SGMII/XAUI interface should still be down after
+ * this call. This is used by interfaces using the bgx mac.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_bgx_probe(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a SGMII interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled. This is used by interfaces using the
+ * bgx mac.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_sgmii_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set(). This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_bgx_sgmii_link_get(int xipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead. This is used by interfaces
+ * using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_sgmii_link_set(int xipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again. This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_bgx_sgmii_configure_loopback(int xipd_port, int enable_internal,
+ int enable_external);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a XAUI interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled. This is used by interfaces using the
+ * bgx mac.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_xaui_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set(). This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_bgx_xaui_link_get(int xipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead. This is used by interfaces
+ * using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_xaui_link_set(int xipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again. This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_bgx_xaui_configure_loopback(int xipd_port, int enable_internal,
+ int enable_external);
+
+int __cvmx_helper_bgx_mixed_enable(int xiface);
+
+cvmx_helper_link_info_t __cvmx_helper_bgx_mixed_link_get(int xipd_port);
+
+int __cvmx_helper_bgx_mixed_link_set(int xipd_port, cvmx_helper_link_info_t link_info);
+
+int __cvmx_helper_bgx_mixed_configure_loopback(int xipd_port, int enable_internal,
+ int enable_external);
+
+cvmx_helper_interface_mode_t cvmx_helper_bgx_get_mode(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Configure Priority-Based Flow Control (a.k.a. PFC/CBFC)
+ * on a specific BGX interface/port.
+ */
+void __cvmx_helper_bgx_xaui_config_pfc(unsigned int node, unsigned int interface, unsigned int port,
+ bool pfc_enable);
+
+/**
+ * This function control how the hardware handles incoming PAUSE
+ * packets. The most common modes of operation:
+ * ctl_bck = 1, ctl_drp = 1: hardware handles everything
+ * ctl_bck = 0, ctl_drp = 0: software sees all PAUSE frames
+ * ctl_bck = 0, ctl_drp = 1: all PAUSE frames are completely ignored
+ * @param node node number.
+ * @param interface interface number
+ * @param port port number
+ * @param ctl_bck 1: Forward PAUSE information to TX block
+ * @param ctl_drp 1: Drop control PAUSE frames.
+ */
+void cvmx_helper_bgx_rx_pause_ctl(unsigned int node, unsigned int interface, unsigned int port,
+ unsigned int ctl_bck, unsigned int ctl_drp);
+
+/**
+ * This function configures the receive action taken for multicast, broadcast
+ * and dmac filter match packets.
+ * @param node node number.
+ * @param interface interface number
+ * @param port port number
+ * @param cam_accept 0: reject packets on dmac filter match
+ * 1: accept packet on dmac filter match
+ * @param mcast_mode 0x0 = Force reject all multicast packets
+ * 0x1 = Force accept all multicast packets
+ * 0x2 = Use the address filter CAM
+ * @param bcast_accept 0 = Reject all broadcast packets
+ * 1 = Accept all broadcast packets
+ */
+void cvmx_helper_bgx_rx_adr_ctl(unsigned int node, unsigned int interface, unsigned int port,
+ unsigned int cam_accept, unsigned int mcast_mode,
+ unsigned int bcast_accept);
+
+/**
+ * Function to control the generation of FCS, padding by the BGX
+ *
+ */
+void cvmx_helper_bgx_tx_options(unsigned int node, unsigned int interface, unsigned int index,
+ bool fcs_enable, bool pad_enable);
+
+/**
+ * Set mac for the ipd_port
+ *
+ * @param xipd_port ipd_port to set the mac
+ * @param bcst If set, accept all broadcast packets
+ * @param mcst Multicast mode
+ * 0 = Force reject all multicast packets
+ * 1 = Force accept all multicast packets
+ * 2 = use the address filter CAM.
+ * @param mac mac address for the ipd_port
+ */
+void cvmx_helper_bgx_set_mac(int xipd_port, int bcst, int mcst, u64 mac);
+
+int __cvmx_helper_bgx_port_init(int xipd_port, int phy_pres);
+void cvmx_helper_bgx_set_jabber(int xiface, unsigned int index, unsigned int size);
+int cvmx_helper_bgx_shutdown_port(int xiface, int index);
+int cvmx_bgx_set_backpressure_override(int xiface, unsigned int port_mask);
+int __cvmx_helper_bgx_fifo_size(int xiface, unsigned int lmac);
+
+/**
+ * Returns if an interface is RGMII or not
+ *
+ * @param xiface xinterface to check
+ * @param index port index (must be 0 for rgmii)
+ *
+ * @return true if RGMII, false otherwise
+ */
+static inline bool cvmx_helper_bgx_is_rgmii(int xiface, int index)
+{
+ union cvmx_bgxx_cmrx_config cmr_config;
+
+ if (!OCTEON_IS_MODEL(OCTEON_CN73XX) || index != 0)
+ return false;
+ cmr_config.u64 = csr_rd(CVMX_BGXX_CMRX_CONFIG(index, xiface));
+ return cmr_config.s.lmac_type == 5;
+}
+
+/**
+ * Probes the BGX Super Path (SMU/SPU) mode
+ *
+ * @param xiface global interface number
+ * @param index interface index
+ *
+ * @return true, if Super-MAC/PCS mode, false -- otherwise
+ */
+bool cvmx_helper_bgx_is_smu(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Configure parameters of PAUSE packet.
+ *
+ * @param xipd_port Global IPD port (node + IPD port).
+ * @param smac Source MAC address.
+ * @param dmac Destination MAC address.
+ * @param type PAUSE packet type.
+ * @param time Pause time for PAUSE packets (number of 512 bit-times).
+ * @param interval Interval between PAUSE packets (number of 512 bit-times).
+ * @return Zero on success, negative on failure.
+ */
+int cvmx_bgx_set_pause_pkt_param(int xipd_port, u64 smac, u64 dmac, unsigned int type,
+ unsigned int time, unsigned int interval);
+
+/**
+ * @INTERNAL
+ * Setup the BGX flow-control mode.
+ *
+ * @param xipd_port Global IPD port (node + IPD port).
+ * @param type Flow-control type/protocol.
+ * @param mode Flow-control mode.
+ * @return Zero on success, negative on failure.
+ */
+int cvmx_bgx_set_flowctl_mode(int xipd_port, cvmx_qos_proto_t qos, cvmx_qos_pkt_mode_t mode);
+
+/**
+ * Enables or disables autonegotiation for an interface.
+ *
+ * @param xiface interface to set autonegotiation
+ * @param index port index
+ * @param enable true to enable autonegotiation, false to disable it
+ *
+ * @return 0 for success, -1 on error.
+ */
+int cvmx_helper_set_autonegotiation(int xiface, int index, bool enable);
+
+/**
+ * Enables or disables forward error correction
+ *
+ * @param xiface interface
+ * @param index port index
+ * @param enable set to true to enable FEC, false to disable
+ *
+ * @return 0 for success, -1 on error
+ *
+ * @NOTE: If autonegotiation is enabled then autonegotiation will be
+ * restarted for negotiating FEC.
+ */
+int cvmx_helper_set_fec(int xiface, int index, bool enable);
+
+#ifdef CVMX_DUMP_BGX
+/**
+ * Dump BGX configuration for node 0
+ */
+int cvmx_dump_bgx_config(unsigned int bgx);
+/**
+ * Dump BGX status for node 0
+ */
+int cvmx_dump_bgx_status(unsigned int bgx);
+/**
+ * Dump BGX configuration
+ */
+int cvmx_dump_bgx_config_node(unsigned int node, unsigned int bgx);
+/**
+ * Dump BGX status
+ */
+int cvmx_dump_bgx_status_node(unsigned int node, unsigned int bgx);
+
+#endif
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h
new file mode 100644
index 0000000000..d7a7b7d227
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h
@@ -0,0 +1,558 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ */
+
+#ifndef __CVMX_HELPER_BOARD_H__
+#define __CVMX_HELPER_BOARD_H__
+
+#define CVMX_VSC7224_NAME_LEN 16
+
+typedef enum {
+ USB_CLOCK_TYPE_REF_12,
+ USB_CLOCK_TYPE_REF_24,
+ USB_CLOCK_TYPE_REF_48,
+ USB_CLOCK_TYPE_CRYSTAL_12,
+} cvmx_helper_board_usb_clock_types_t;
+
+typedef enum cvmx_phy_type {
+ BROADCOM_GENERIC_PHY,
+ MARVELL_GENERIC_PHY,
+ CORTINA_PHY, /** Now Inphi */
+ AQUANTIA_PHY,
+ GENERIC_8023_C22_PHY,
+ GENERIC_8023_C45_PHY,
+ INBAND_PHY,
+ QUALCOMM_S17, /** Qualcomm QCA833X switch */
+ VITESSE_VSC8490_PHY, /** Vitesse VSC8490 is non-standard for SGMII */
+ FAKE_PHY, /** Unsupported or no PHY, use GPIOs for LEDs */
+} cvmx_phy_type_t;
+
+/** Used to record the host mode used by the Cortina CS4321 PHY */
+typedef enum {
+ CVMX_PHY_HOST_MODE_UNKNOWN,
+ CVMX_PHY_HOST_MODE_SGMII,
+ CVMX_PHY_HOST_MODE_QSGMII,
+ CVMX_PHY_HOST_MODE_XAUI,
+ CVMX_PHY_HOST_MODE_RXAUI,
+} cvmx_phy_host_mode_t;
+
+typedef enum {
+ set_phy_link_flags_autoneg = 0x1,
+ set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
+ set_phy_link_flags_flow_control_enable = 0x1 << 1,
+ set_phy_link_flags_flow_control_disable = 0x2 << 1,
+ set_phy_link_flags_flow_control_mask = 0x3 << 1,
+} cvmx_helper_board_set_phy_link_flags_types_t;
+
+/**
+ * The EBB6600 board uses a MDIO mux device to select between the two QLM
+ * modules since both QLM modules share the same PHY addresses. The
+ * MDIO mux is controlled via GPIO by a GPIO device that is also on
+ * the TWSI bus rather than native OCTEON GPIO libes.
+ *
+ * To further complicate matters, the TWSI GPIO device sits behind
+ * a TWSI mux device as well, making accessing the MDIO devices on
+ * this board a very complex operation involving writing to the TWSI mux,
+ * followed by the MDIO mux device.
+ */
+/** Maximum number of GPIO devices used to control the MDIO mux */
+#define CVMX_PHY_MUX_MAX_GPIO 2
+
+/** Type of MDIO mux device, currently OTHER isn't supported */
+typedef enum {
+ SN74CBTLV3253, /** SN74CBTLV3253 I2C device */
+ OTHER /** Unknown/other */
+} cvmx_phy_mux_type_t;
+
+/** Type of GPIO line controlling MDIO mux */
+typedef enum {
+ GPIO_OCTEON, /** Native OCTEON */
+ GPIO_PCA8574 /** TWSI mux device */
+} cvmx_phy_gpio_type_t;
+
+/* Forward declarations */
+struct cvmx_fdt_sfp_info; /** Defined in cvmx-helper-fdt.h */
+struct cvmx_vsc7224;
+struct cvmx_fdt_gpio_info; /** Defined in cvmx-helper-fdt.h */
+struct cvmx_fdt_i2c_bus_info; /** Defined in cvmx-helper-fdt.h */
+struct cvmx_phy_info;
+struct cvmx_fdt_i2c_bus_info;
+struct cvmx_fdt_gpio_info;
+struct cvmx_fdt_gpio_led;
+
+/**
+ * @INTERNAL
+ * This data structure is used when the port LEDs are wired up to Octeon's GPIO
+ * lines instead of to a traditional PHY.
+ */
+struct cvmx_phy_gpio_leds {
+ struct cvmx_phy_gpio_leds *next; /** For when ports are grouped together */
+ u64 last_rx_count; /** Counters used to check for activity */
+ u64 last_tx_count; /** Counters used to check for activity */
+ u64 last_activity_poll_time; /** Last time activity was polled */
+ u64 last_link_poll_time; /** Last time link was polled */
+ int of_offset;
+ int link_poll_interval_ms; /** Link polling interval in ms */
+ int activity_poll_interval_ms; /** Activity polling interval in ms */
+ struct cvmx_fdt_gpio_led *link_status;
+ struct cvmx_fdt_gpio_led *error;
+ struct cvmx_fdt_gpio_led *rx_activity;
+ struct cvmx_fdt_gpio_led *tx_activity;
+ struct cvmx_fdt_gpio_led *identify;
+
+ struct cvmx_fdt_gpio_info *link_status_gpio;
+ struct cvmx_fdt_gpio_info *error_gpio;
+ /** Type of GPIO for error LED */
+ /** If GPIO expander, describe the bus to the expander */
+ struct cvmx_fdt_gpio_info *rx_activity_gpio;
+ struct cvmx_fdt_gpio_info *tx_activity_gpio;
+
+ u16 rx_activity_hz; /** RX activity blink time in hz */
+ u16 tx_activity_hz; /** TX activity blink time in hz */
+ /**
+ * Set if activity and/or link is using an Inphi/Cortina CS4343 or
+ * compatible phy that requires software assistance. NULL if not used.
+ */
+ bool link_status_active_low; /** True if active link is active low */
+ bool error_status_active_low; /** True if error LED is active low */
+ bool error_active_low; /** True if error is active low */
+ bool rx_activity_active_low; /** True if rx activity is active low */
+ bool tx_activity_active_low; /** True if tx activity is active low */
+ /** Set true if LEDs are shared on an interface by all ports */
+ bool interface_leds;
+ int8_t rx_gpio_timer; /** GPIO clock generator timer [0-3] */
+ int8_t tx_gpio_timer; /** GPIO clock generator timer [0-3] */
+
+ /** True if LOS signal activates error LED */
+ bool los_generate_error;
+ /** True if the error LED is hooked up to a GPIO expander */
+ bool error_gpio_expander;
+ /** True if the link and RX activity LEDs are shared */
+ bool link_and_rx_activity_shared;
+ /** True if the link and TX activity LEDs are shared */
+ bool link_and_tx_activity_shared;
+ /** True if the RX activity and TX activity LEDs are shared */
+ bool rx_and_tx_activity_shared;
+ /** True if link is driven directly by the hardware */
+ bool link_led_hw_link;
+ bool error_lit; /** True if ERROR LED is lit */
+ bool quad_sfp_mode; /** True if using four SFPs for XLAUI */
+ /** User-defined function to update the link LED */
+ void (*update_link_led)(int xiface, int index, cvmx_helper_link_info_t result);
+ /** User-defined function to update the rx activity LED */
+ void (*update_rx_activity_led)(struct cvmx_phy_gpio_leds *led, int xiface, int index,
+ bool check_time);
+};
+
+/** This structure contains the tap values to use for various cable lengths */
+struct cvmx_vsc7224_tap {
+ u16 len; /** Starting cable length for tap values */
+ u16 main_tap; /** Main tap value to use */
+ u16 pre_tap; /** Pre-tap value to use */
+ u16 post_tap; /** Post-tap value to use */
+};
+
+/** Data structure for Microsemi VSC7224 channel */
+struct cvmx_vsc7224_chan {
+ struct cvmx_vsc7224_chan *next, *prev; /** Used for linking */
+ int ipd_port; /** IPD port this channel belongs to */
+ int xiface; /** xinterface of SFP */
+ int index; /** Port index of SFP */
+ int lane; /** Lane on port */
+ int of_offset; /** Offset of channel info in dt */
+ bool is_tx; /** True if is transmit channel */
+ bool maintap_disable; /** True to disable the main tap */
+ bool pretap_disable; /** True to disable pre-tap */
+ bool posttap_disable; /** True to disable post-tap */
+ int num_taps; /** Number of tap values */
+ /** (Q)SFP attached to this channel */
+ struct cvmx_fdt_sfp_info *sfp_info;
+ struct cvmx_vsc7224 *vsc7224; /** Pointer to parent */
+ /** Tap values for various lengths, must be@the end */
+ struct cvmx_vsc7224_tap taps[0];
+};
+
+/** Data structure for Microsemi VSC7224 reclocking chip */
+struct cvmx_vsc7224 {
+ const char *name; /** Name */
+ /** Pointer to cannel data */
+ struct cvmx_vsc7224_chan *channel[4];
+ /** I2C bus device is connected to */
+ struct cvmx_fdt_i2c_bus_info *i2c_bus;
+ /** Address of VSC7224 on i2c bus */
+ int i2c_addr;
+ struct cvmx_fdt_gpio_info *los_gpio; /** LoS GPIO pin */
+ struct cvmx_fdt_gpio_info *reset_gpio; /** Reset GPIO pin */
+ int of_offset; /** Offset in device tree */
+};
+
+/** Data structure for Avago AVSP5410 gearbox phy */
+struct cvmx_avsp5410 {
+ const char *name; /** Name */
+ /** I2C bus device is connected to */
+ struct cvmx_fdt_i2c_bus_info *i2c_bus;
+ /** Address of AVSP5410 on i2c bus */
+ int i2c_addr;
+ int of_offset; /** Offset in device tree */
+ int ipd_port; /** IPD port this phy belongs to */
+ int xiface; /** xinterface of SFP */
+ int index; /** Port index of SFP */
+ u64 prev_temp; /** Previous temparature recorded on Phy Core */
+ u64 prev_temp_mins; /** Mininutes when the prev temp check is done */
+ /** (Q)SFP attached to this phy */
+ struct cvmx_fdt_sfp_info *sfp_info;
+};
+
+struct cvmx_cs4343_info;
+
+/**
+ * @INTERNAL
+ *
+ * Data structure containing Inphi CS4343 slice information
+ */
+struct cvmx_cs4343_slice_info {
+ const char *name; /** Name of this slice in device tree */
+ struct cvmx_cs4343_info *mphy; /** Pointer to mphy cs4343 */
+ struct cvmx_phy_info *phy_info;
+ int of_offset; /** Offset in device tree */
+ int slice_no; /** Slice number */
+ int reg_offset; /** Offset for this slice */
+ u16 sr_stx_cmode_res; /** See Rainier device tree */
+ u16 sr_stx_drv_lower_cm; /** See Rainier device tree */
+ u16 sr_stx_level; /** See Rainier device tree */
+ u16 sr_stx_pre_peak; /** See Rainier device tree */
+ u16 sr_stx_muxsubrate_sel; /** See Rainier device tree */
+ u16 sr_stx_post_peak; /** See Rainier device tree */
+ u16 cx_stx_cmode_res; /** See Rainier device tree */
+ u16 cx_stx_drv_lower_cm; /** See Rainier device tree */
+ u16 cx_stx_level; /** See Rainier device tree */
+ u16 cx_stx_pre_peak; /** See Rainier device tree */
+ u16 cx_stx_muxsubrate_sel; /** See Rainier device tree */
+ u16 cx_stx_post_peak; /** See Rainier device tree */
+ u16 basex_stx_cmode_res; /** See Rainier device tree */
+ u16 basex_stx_drv_lower_cm; /** See Rainier device tree */
+ u16 basex_stx_level; /** See Rainier device tree */
+ u16 basex_stx_pre_peak; /** See Rainier device tree */
+ u16 basex_stx_muxsubrate_sel; /** See Rainier device tree */
+ u16 basex_stx_post_peak; /** See Rainier device tree */
+ int link_gpio; /** Link LED gpio pin number, -1 if none */
+ int error_gpio; /** Error LED GPIO pin or -1 if none */
+ int los_gpio; /** LoS input GPIO or -1 if none */
+ bool los_inverted; /** True if LoS input is inverted */
+ bool link_inverted; /** True if link output is inverted */
+ bool error_inverted; /** True if error output is inverted */
+};
+
+/**
+ * @INTERNAL
+ *
+ * Data structure for Cortina/Inphi CS4343 device
+ */
+struct cvmx_cs4343_info {
+ const char *name; /** Name of Inphi/Cortina CS4343 in DT */
+ struct cvmx_phy_info *phy_info;
+ struct cvmx_cs4343_slice_info slice[4]; /** Slice information */
+ int of_offset;
+};
+
+/**
+ * @INTERNAL
+ * This data structure is used to hold PHY information and is subject to change.
+ * Please do not use this data structure directly.
+ *
+ * NOTE: The U-Boot OCTEON Ethernet drivers depends on this data structure for
+ * the mux support.
+ */
+typedef struct cvmx_phy_info {
+ int phy_addr; /** MDIO address of PHY */
+ int phy_sub_addr; /** Sub-address (i.e. slice), used by Cortina */
+ int ipd_port; /** IPD port number for the PHY */
+ /** MDIO bus PHY connected to (even if behind mux) */
+ int mdio_unit;
+ int direct_connect; /** 1 if PHY is directly connected */
+ int gpio[CVMX_PHY_MUX_MAX_GPIO]; /** GPIOs used to control mux, -1 if not used */
+
+ /** Type of GPIO. It can be a local OCTEON GPIO or a TWSI GPIO */
+ cvmx_phy_gpio_type_t gpio_type[CVMX_PHY_MUX_MAX_GPIO];
+
+ /** Address of TWSI GPIO */
+ int cvmx_gpio_twsi[CVMX_PHY_MUX_MAX_GPIO];
+
+ /** Value to put into the GPIO lines to select MDIO bus */
+ int gpio_value;
+ int gpio_parent_mux_twsi; /** -1 if not used, parent TWSI mux for ebb6600 */
+ int gpio_parent_mux_select; /** selector to use on parent TWSI mux */
+ cvmx_phy_type_t phy_type; /** Type of PHY */
+ cvmx_phy_mux_type_t mux_type; /** Type of MDIO mux */
+ int mux_twsi_addr; /** Address of the MDIO mux */
+ cvmx_phy_host_mode_t host_mode; /** Used by Cortina PHY */
+ void *phydev; /** Pointer to parent phy device */
+ int fdt_offset; /** Node in flat device tree */
+ int phy_i2c_bus; /** I2C bus for reclocking chips */
+ int phy_i2c_addr; /** I2C address of reclocking chip */
+ int num_vsc7224; /** Number of Microsemi VSC7224 devices */
+ struct cvmx_vsc7224 *vsc7224; /** Info for VSC7224 devices */
+ /** SFP/QSFP descriptor */
+ struct cvmx_fdt_sfp_info *sfp_info;
+ /** CS4343 slice information for SGMII/XFI. This is NULL in XLAUI mode */
+ struct cvmx_cs4343_slice_info *cs4343_slice_info;
+ /** CS4343 mphy information for XLAUI */
+ struct cvmx_cs4343_info *cs4343_info;
+ /** Pointer to function to return link information */
+ cvmx_helper_link_info_t (*link_function)(struct cvmx_phy_info *phy_info);
+ /**
+ * If there are LEDs driven by GPIO lines instead of by a PHY device
+ * then they are described here, otherwise gpio_leds should be NULL.
+ */
+ struct cvmx_phy_gpio_leds *gpio_leds;
+} cvmx_phy_info_t;
+
+/* Fake IPD port, the RGMII/MII interface may use different PHY, use this
+ macro to return appropriate MIX address to read the PHY. */
+#define CVMX_HELPER_BOARD_MGMT_IPD_PORT -10
+
+/**
+ * Return the MII PHY address associated with the given IPD
+ * port. A result of -1 means there isn't a MII capable PHY
+ * connected to this port. On chips supporting multiple MII
+ * busses the bus number is encoded in bits <15:8>.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @param ipd_port Octeon IPD port to get the MII address for.
+ *
+ * @return MII PHY address and bus number or -1.
+ */
+int cvmx_helper_board_get_mii_address(int ipd_port);
+
+/**
+ * This function as a board specific method of changing the PHY
+ * speed, duplex, and autonegotiation. This programs the PHY and
+ * not Octeon. This can be used to force Octeon's links to
+ * specific settings.
+ *
+ * @param phy_addr The address of the PHY to program
+ * @param link_flags
+ * Flags to control autonegotiation. Bit 0 is autonegotiation
+ * enable/disable to maintain backward compatibility.
+ * @param link_info Link speed to program. If the speed is zero and autonegotiation
+ * is enabled, all possible negotiation speeds are advertised.
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_helper_board_link_set_phy(int phy_addr,
+ cvmx_helper_board_set_phy_link_flags_types_t link_flags,
+ cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * This function is the board specific method of determining an
+ * ethernet ports link speed. Most Octeon boards have Marvell PHYs
+ * and are handled by the fall through case. This function must be
+ * updated for boards that don't have the normal Marvell PHYs.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @param ipd_port IPD input port associated with the port we want to get link
+ * status for.
+ *
+ * @return The ports link status. If the link isn't fully resolved, this must
+ * return zero.
+ */
+cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * This function is called by cvmx_helper_interface_probe() after it
+ * determines the number of ports Octeon can support on a specific
+ * interface. This function is the per board location to override
+ * this value. It is called with the number of ports Octeon might
+ * support and should return the number of actual ports on the
+ * board.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @param interface Interface to probe
+ * @param supported_ports
+ * Number of ports Octeon supports.
+ *
+ * @return Number of ports the actual board supports. Many times this will
+ * simple be "support_ports".
+ */
+int __cvmx_helper_board_interface_probe(int interface, int supported_ports);
+
+/**
+ * @INTERNAL
+ * Enable packet input/output from the hardware. This function is
+ * called after by cvmx_helper_packet_hardware_enable() to
+ * perform board specific initialization. For most boards
+ * nothing is needed.
+ *
+ * @param interface Interface to enable
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_board_hardware_enable(int interface);
+
+/**
+ * @INTERNAL
+ * Gets the clock type used for the USB block based on board type.
+ * Used by the USB code for auto configuration of clock type.
+ *
+ * @return USB clock type enumeration
+ */
+cvmx_helper_board_usb_clock_types_t __cvmx_helper_board_usb_get_clock_type(void);
+
+/**
+ * @INTERNAL
+ * Adjusts the number of available USB ports on Octeon based on board
+ * specifics.
+ *
+ * @param supported_ports expected number of ports based on chip type;
+ *
+ *
+ * @return number of available usb ports, based on board specifics.
+ * Return value is supported_ports if function does not
+ * override.
+ */
+int __cvmx_helper_board_usb_get_num_ports(int supported_ports);
+
+/**
+ * @INTERNAL
+ * Returns if a port is present on an interface
+ *
+ * @param fdt_addr - address fo flat device tree
+ * @param ipd_port - IPD port number
+ *
+ * @return 1 if port is present, 0 if not present, -1 if error
+ */
+int __cvmx_helper_board_get_port_from_dt(void *fdt_addr, int ipd_port);
+
+/**
+ * Return the host mode for the PHY. Currently only the Cortina CS4321 PHY
+ * needs this.
+ *
+ * @param ipd_port - ipd port number to get the host mode for
+ *
+ * @return host mode for phy
+ */
+cvmx_phy_host_mode_t cvmx_helper_board_get_phy_host_mode(int ipd_port);
+
+/**
+ * @INTERNAL
+ * This function outputs the cvmx_phy_info_t data structure for the specified
+ * port.
+ *
+ * @param[out] - phy_info - phy info data structure
+ * @param ipd_port - port to get phy info for
+ *
+ * @return 0 for success, -1 if info not available
+ *
+ * NOTE: The phy_info data structure is subject to change.
+ */
+int cvmx_helper_board_get_phy_info(cvmx_phy_info_t *phy_info, int ipd_port);
+
+/**
+ * @INTERNAL
+ * Parse the device tree and set whether a port is valid or not.
+ *
+ * @param fdt_addr Pointer to device tree
+ *
+ * @return 0 for success, -1 on error.
+ */
+int __cvmx_helper_parse_bgx_dt(const void *fdt_addr);
+
+/**
+ * @INTERNAL
+ * Parse the device tree and set whether a port is valid or not.
+ *
+ * @param fdt_addr Pointer to device tree
+ *
+ * @return 0 for success, -1 on error.
+ */
+int __cvmx_helper_parse_bgx_rgmii_dt(const void *fdt_addr);
+
+/**
+ * @INTERNAL
+ * Updates any GPIO link LEDs if present
+ *
+ * @param xiface Interface number
+ * @param index Port index
+ * @param result Link status result
+ */
+void cvmx_helper_update_link_led(int xiface, int index, cvmx_helper_link_info_t result);
+/**
+ * Update the RX activity LED for the specified interface and port index
+ *
+ * @param xiface Interface number
+ * @param index Port index
+ * @parma check_time True if we should bail out before the polling interval
+ */
+void cvmx_update_rx_activity_led(int xiface, int index, bool check_time);
+
+/**
+ * @INTERNAL
+ * Figure out which mod_abs changed function to use based on the phy type
+ *
+ * @param xiface xinterface number
+ * @param index port index on interface
+ *
+ * @return 0 for success, -1 on error
+ *
+ * This function figures out the proper mod_abs_changed function to use and
+ * registers the appropriate function. This should be called after the device
+ * tree has been fully parsed for the given port as well as after all SFP
+ * slots and any Microsemi VSC7224 devices have been parsed in the device tree.
+ */
+int cvmx_helper_phy_register_mod_abs_changed(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Return loss of signal
+ *
+ * @param xiface xinterface number
+ * @param index port index on interface
+ *
+ * @return 0 if signal present, 1 if loss of signal.
+ *
+ * @NOTE: A result of 0 is possible in some cases where the signal is
+ * not present.
+ *
+ * This is for use with __cvmx_qlm_rx_equilization
+ */
+int __cvmx_helper_get_los(int xiface, int index);
+
+/**
+ * Given the address of the MDIO registers, output the CPU node and MDIO bus
+ *
+ * @param addr 64-bit address of MDIO registers (from device tree)
+ * @param[out] node CPU node number (78xx)
+ * @param[out] bus MDIO bus number
+ */
+void __cvmx_mdio_addr_to_node_bus(u64 addr, int *node, int *bus);
+
+/**
+ * Turn on the error LED
+ *
+ * @param leds LEDs belonging to port
+ * @param error true to turn on LED, false to turn off
+ */
+void cvmx_helper_leds_show_error(struct cvmx_phy_gpio_leds *leds, bool error);
+
+#endif /* __CVMX_HELPER_BOARD_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h
new file mode 100644
index 0000000000..d4bd910b01
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h
@@ -0,0 +1,884 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper Functions for the Configuration Framework
+ *
+ * OCTEON_CN68XX introduces a flexible hw interface configuration
+ * scheme. To cope with this change and the requirements of
+ * configurability for other system resources, e.g., IPD/PIP pknd and
+ * PKO ports and queues, a configuration framework for the SDK is
+ * designed. It has two goals: first to recognize and establish the
+ * default configuration and, second, to allow the user to define key
+ * parameters in a high-level language.
+ *
+ * The helper functions query the QLM setup to help achieving the
+ * first goal.
+ *
+ * The second goal is accomplished by generating
+ * cvmx_helper_cfg_init() from a high-level lanaguage.
+ */
+
+#ifndef __CVMX_HELPER_CFG_H__
+#define __CVMX_HELPER_CFG_H__
+
+#include "cvmx-helper-util.h"
+
+#define CVMX_HELPER_CFG_MAX_PKO_PORT 128
+#define CVMX_HELPER_CFG_MAX_PIP_BPID 64
+#define CVMX_HELPER_CFG_MAX_PIP_PKND 64
+#define CVMX_HELPER_CFG_MAX_PKO_QUEUES 256
+#define CVMX_HELPER_CFG_MAX_PORT_PER_IFACE 256
+
+#define CVMX_HELPER_CFG_INVALID_VALUE -1
+
+#define cvmx_helper_cfg_assert(cond) \
+ do { \
+ if (!(cond)) { \
+ debug("cvmx_helper_cfg_assert (%s) at %s:%d\n", #cond, __FILE__, \
+ __LINE__); \
+ } \
+ } while (0)
+
+extern int cvmx_npi_max_pknds;
+
+/*
+ * Config Options
+ *
+ * These options have to be set via cvmx_helper_cfg_opt_set() before calling the
+ * routines that set up the hw. These routines process the options and set them
+ * correctly to take effect at runtime.
+ */
+enum cvmx_helper_cfg_option {
+ CVMX_HELPER_CFG_OPT_USE_DWB, /*
+ * Global option to control if
+ * the SDK configures units (DMA,
+ * SSO, and PKO) to send don't
+ * write back (DWB) requests for
+ * freed buffers. Set to 1/0 to
+ * enable/disable DWB.
+ *
+ * For programs that fit inside
+ * L2, sending DWB just causes
+ * more L2 operations without
+ * benefit.
+ */
+
+ CVMX_HELPER_CFG_OPT_MAX
+};
+
+typedef enum cvmx_helper_cfg_option cvmx_helper_cfg_option_t;
+
+struct cvmx_phy_info;
+struct cvmx_fdt_sfp_info;
+struct cvmx_vsc7224_chan;
+struct phy_device;
+
+struct cvmx_srio_port_param {
+ /** True to override SRIO CTLE zero setting */
+ bool srio_rx_ctle_zero_override : 1;
+ /** Equalization peaking control dft: 6 */
+ u8 srio_rx_ctle_zero : 4;
+ /** Set true to override CTLE taps */
+ bool srio_rx_ctle_agc_override : 1;
+ u8 srio_rx_agc_pre_ctle : 4; /** AGC pre-CTLE gain */
+ u8 srio_rx_agc_post_ctle : 4; /** AGC post-CTLE gain */
+ bool srio_tx_swing_override : 1; /** True to override TX Swing */
+ u8 srio_tx_swing : 5; /** TX Swing */
+ bool srio_tx_gain_override : 1; /** True to override TX gain */
+ u8 srio_tx_gain : 3; /** TX gain */
+ bool srio_tx_premptap_override : 1; /** True to override premptap values */
+ u8 srio_tx_premptap_pre : 4; /** Pre premptap value */
+ u8 srio_tx_premptap_post : 5; /** Post premptap value */
+ bool srio_tx_vboost_override : 1; /** True to override TX vboost setting */
+ bool srio_tx_vboost : 1; /** vboost setting (default 1) */
+};
+
+/*
+ * Per physical port
+ * Note: This struct is passed between linux and SE apps.
+ */
+struct cvmx_cfg_port_param {
+ int port_fdt_node; /** Node offset in FDT of node */
+ int phy_fdt_node; /** Node offset in FDT of PHY */
+ struct cvmx_phy_info *phy_info; /** Data structure with PHY information */
+ int8_t ccpp_pknd;
+ int8_t ccpp_bpid;
+ int8_t ccpp_pko_port_base;
+ int8_t ccpp_pko_num_ports;
+ u8 agl_rx_clk_skew; /** AGL rx clock skew setting (default 0) */
+ u8 rgmii_tx_clk_delay; /** RGMII TX clock delay value if not bypassed */
+ bool valid : 1; /** 1 = port valid, 0 = invalid */
+ bool sgmii_phy_mode : 1; /** 1 = port in PHY mode, 0 = MAC mode */
+ bool sgmii_1000x_mode : 1; /** 1 = 1000Base-X mode, 0 = SGMII mode */
+ bool agl_rx_clk_delay_bypass : 1; /** 1 = use rx clock delay bypass for AGL mode */
+ bool force_link_up : 1; /** Ignore PHY and always report link up */
+ bool disable_an : 1; /** true to disable autonegotiation */
+ bool link_down_pwr_dn : 1; /** Power PCS off when link is down */
+ bool phy_present : 1; /** true if PHY is present */
+ bool tx_clk_delay_bypass : 1; /** True to bypass the TX clock delay */
+ bool enable_fec : 1; /** True to enable FEC for 10/40G links */
+ /** Settings for short-run SRIO host */
+ struct cvmx_srio_port_param srio_short;
+ /** Settings for long-run SRIO host */
+ struct cvmx_srio_port_param srio_long;
+ u8 agl_refclk_sel; /** RGMII refclk select to use */
+ /** Set if local (non-PHY) LEDs are used */
+ struct cvmx_phy_gpio_leds *gpio_leds;
+ struct cvmx_fdt_sfp_info *sfp_info; /** SFP+/QSFP info for port */
+ /** Offset of SFP/SFP+/QSFP slot in device tree */
+ int sfp_of_offset;
+ /** Microsemi VSC7224 channel info data structure */
+ struct cvmx_vsc7224_chan *vsc7224_chan;
+ /** Avago AVSP-5410 Phy */
+ struct cvmx_avsp5410 *avsp5410;
+ struct phy_device *phydev;
+};
+
+/*
+ * Per pko_port
+ */
+struct cvmx_cfg_pko_port_param {
+ s16 ccppp_queue_base;
+ s16 ccppp_num_queues;
+};
+
+/*
+ * A map from pko_port to
+ * interface,
+ * index, and
+ * pko engine id
+ */
+struct cvmx_cfg_pko_port_map {
+ s16 ccppl_interface;
+ s16 ccppl_index;
+ s16 ccppl_eid;
+};
+
+/*
+ * This is for looking up pko_base_port and pko_nport for ipd_port
+ */
+struct cvmx_cfg_pko_port_pair {
+ int8_t ccppp_base_port;
+ int8_t ccppp_nports;
+};
+
+typedef union cvmx_user_static_pko_queue_config {
+ struct {
+ struct pko_queues_cfg {
+ unsigned queues_per_port : 11, qos_enable : 1, pfc_enable : 1;
+ } pko_cfg_iface[6];
+ struct pko_queues_cfg pko_cfg_loop;
+ struct pko_queues_cfg pko_cfg_npi;
+ } pknd;
+ struct {
+ u8 pko_ports_per_interface[5];
+ u8 pko_queues_per_port_interface[5];
+ u8 pko_queues_per_port_loop;
+ u8 pko_queues_per_port_pci;
+ u8 pko_queues_per_port_srio[4];
+ } non_pknd;
+} cvmx_user_static_pko_queue_config_t;
+
+extern cvmx_user_static_pko_queue_config_t __cvmx_pko_queue_static_config[CVMX_MAX_NODES];
+extern struct cvmx_cfg_pko_port_map cvmx_cfg_pko_port_map[CVMX_HELPER_CFG_MAX_PKO_PORT];
+extern struct cvmx_cfg_port_param cvmx_cfg_port[CVMX_MAX_NODES][CVMX_HELPER_MAX_IFACE]
+ [CVMX_HELPER_CFG_MAX_PORT_PER_IFACE];
+extern struct cvmx_cfg_pko_port_param cvmx_pko_queue_table[];
+extern int cvmx_enable_helper_flag;
+
+/*
+ * @INTERNAL
+ * Return configured pknd for the port
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ * @return the pknd
+ */
+int __cvmx_helper_cfg_pknd(int interface, int index);
+
+/*
+ * @INTERNAL
+ * Return the configured bpid for the port
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ * @return the bpid
+ */
+int __cvmx_helper_cfg_bpid(int interface, int index);
+
+/**
+ * @INTERNAL
+ * Return the configured pko_port base for the port
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ * @return the pko_port base
+ */
+int __cvmx_helper_cfg_pko_port_base(int interface, int index);
+
+/*
+ * @INTERNAL
+ * Return the configured number of pko_ports for the port
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ * @return the number of pko_ports
+ */
+int __cvmx_helper_cfg_pko_port_num(int interface, int index);
+
+/*
+ * @INTERNAL
+ * Return the configured pko_queue base for the pko_port
+ *
+ * @param pko_port
+ * @return the pko_queue base
+ */
+int __cvmx_helper_cfg_pko_queue_base(int pko_port);
+
+/*
+ * @INTERNAL
+ * Return the configured number of pko_queues for the pko_port
+ *
+ * @param pko_port
+ * @return the number of pko_queues
+ */
+int __cvmx_helper_cfg_pko_queue_num(int pko_port);
+
+/*
+ * @INTERNAL
+ * Return the interface the pko_port is configured for
+ *
+ * @param pko_port
+ * @return the interface for the pko_port
+ */
+int __cvmx_helper_cfg_pko_port_interface(int pko_port);
+
+/*
+ * @INTERNAL
+ * Return the index of the port the pko_port is configured for
+ *
+ * @param pko_port
+ * @return the index of the port
+ */
+int __cvmx_helper_cfg_pko_port_index(int pko_port);
+
+/*
+ * @INTERNAL
+ * Return the pko_eid of the pko_port
+ *
+ * @param pko_port
+ * @return the pko_eid
+ */
+int __cvmx_helper_cfg_pko_port_eid(int pko_port);
+
+/*
+ * @INTERNAL
+ * Return the max# of pko queues allocated.
+ *
+ * @return the max# of pko queues
+ *
+ * Note: there might be holes in the queue space depending on user
+ * configuration. The function returns the highest queue's index in
+ * use.
+ */
+int __cvmx_helper_cfg_pko_max_queue(void);
+
+/*
+ * @INTERNAL
+ * Return the max# of PKO DMA engines allocated.
+ *
+ * @return the max# of DMA engines
+ *
+ * NOTE: the DMA engines are allocated contiguously and starting from
+ * 0.
+ */
+int __cvmx_helper_cfg_pko_max_engine(void);
+
+/*
+ * Get the value set for the config option ``opt''.
+ *
+ * @param opt is the config option.
+ * @return the value set for the option
+ *
+ * LR: only used for DWB in NPI, POW, PKO1
+ */
+u64 cvmx_helper_cfg_opt_get(cvmx_helper_cfg_option_t opt);
+
+/*
+ * Set the value for a config option.
+ *
+ * @param opt is the config option.
+ * @param val is the value to set for the opt.
+ * @return 0 for success and -1 on error
+ *
+ * Note an option here is a config-time parameter and this means that
+ * it has to be set before calling the corresponding setup functions
+ * that actually sets the option in hw.
+ *
+ * LR: Not used.
+ */
+int cvmx_helper_cfg_opt_set(cvmx_helper_cfg_option_t opt, u64 val);
+
+/*
+ * Retrieve the pko_port base given ipd_port.
+ *
+ * @param ipd_port is the IPD eport
+ * @return the corresponding PKO port base for the physical port
+ * represented by the IPD eport or CVMX_HELPER_CFG_INVALID_VALUE.
+ */
+int cvmx_helper_cfg_ipd2pko_port_base(int ipd_port);
+
+/*
+ * Retrieve the number of pko_ports given ipd_port.
+ *
+ * @param ipd_port is the IPD eport
+ * @return the corresponding number of PKO ports for the physical port
+ * represented by IPD eport or CVMX_HELPER_CFG_INVALID_VALUE.
+ */
+int cvmx_helper_cfg_ipd2pko_port_num(int ipd_port);
+
+/*
+ * @INTERNAL
+ * The init function
+ *
+ * @param node
+ * @return 0 for success.
+ *
+ * Note: this function is meant to be called to set the ``configured
+ * parameters,'' e.g., pknd, bpid, etc. and therefore should be before
+ * any of the corresponding cvmx_helper_cfg_xxxx() functions are
+ * called.
+ */
+int __cvmx_helper_init_port_config_data(int node);
+
+/*
+ * @INTERNAL
+ * The local init function
+ *
+ * @param none
+ * @return 0 for success.
+ *
+ * Note: this function is meant to be called to set the ``configured
+ * parameters locally,'' e.g., pknd, bpid, etc. and therefore should be before
+ * any of the corresponding cvmx_helper_cfg_xxxx() functions are
+ * called.
+ */
+int __cvmx_helper_init_port_config_data_local(void);
+
+/*
+ * Set the frame max size and jabber size to 65535.
+ *
+ */
+void cvmx_helper_cfg_set_jabber_and_frame_max(void);
+
+/*
+ * Enable storing short packets only in the WQE.
+ */
+void cvmx_helper_cfg_store_short_packets_in_wqe(void);
+
+/*
+ * Allocated a block of internal ports and queues for the specified
+ * interface/port
+ *
+ * @param interface the interface for which the internal ports and queues
+ * are requested
+ * @param port the index of the port within in the interface for which
+ the internal ports and queues are requested.
+ * @param pot_count the number of internal ports requested
+ * @param queue_cnt the number of queues requested for each of the internal
+ * port. This call will allocate a total of
+ * (port_cnt * queue_cnt) queues
+ *
+ * @return 0 on success
+ * -1 on failure
+ *
+ * LR: Called ONLY from comfig-parse!
+ */
+int cvmx_pko_alloc_iport_and_queues(int interface, int port, int port_cnt, int queue_cnt);
+
+/*
+ * Free the queues that are associated with the specified port
+ *
+ * @param port the internal port for which the queues are freed.
+ *
+ * @return 0 on success
+ * -1 on failure
+ */
+int cvmx_pko_queue_free(u64 port);
+
+/*
+ * Initializes the pko queue range data structure.
+ * @return 0 on success
+ * -1 on failure
+ */
+int init_cvmx_pko_que_range(void);
+
+/*
+ * Frees up all the allocated ques.
+ */
+void cvmx_pko_queue_free_all(void);
+
+/**
+ * Returns if port is valid for a given interface
+ *
+ * @param xiface interface to check
+ * @param index port index in the interface
+ *
+ * @return status of the port present or not.
+ */
+int cvmx_helper_is_port_valid(int xiface, int index);
+
+/**
+ * Set whether or not a port is valid
+ *
+ * @param interface interface to set
+ * @param index port index to set
+ * @param valid set 0 to make port invalid, 1 for valid
+ */
+void cvmx_helper_set_port_valid(int interface, int index, bool valid);
+
+/**
+ * @INTERNAL
+ * Return if port is in PHY mode
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ *
+ * @return 1 if port is in PHY mode, 0 if port is in MAC mode
+ */
+bool cvmx_helper_get_mac_phy_mode(int interface, int index);
+void cvmx_helper_set_mac_phy_mode(int interface, int index, bool valid);
+
+/**
+ * @INTERNAL
+ * Return if port is in 1000Base X mode
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ *
+ * @return 1 if port is in 1000Base X mode, 0 if port is in SGMII mode
+ */
+bool cvmx_helper_get_1000x_mode(int interface, int index);
+void cvmx_helper_set_1000x_mode(int interface, int index, bool valid);
+
+/**
+ * @INTERNAL
+ * Return if an AGL port should bypass the RX clock delay
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ */
+bool cvmx_helper_get_agl_rx_clock_delay_bypass(int interface, int index);
+void cvmx_helper_set_agl_rx_clock_delay_bypass(int interface, int index, bool valid);
+
+/**
+ * @INTERNAL
+ * Forces a link to always return that it is up ignoring the PHY (if present)
+ *
+ * @param interface the interface number
+ * @param index the port's index
+ */
+bool cvmx_helper_get_port_force_link_up(int interface, int index);
+void cvmx_helper_set_port_force_link_up(int interface, int index, bool value);
+
+/**
+ * @INTERNAL
+ * Return true if PHY is present to the passed xiface
+ *
+ * @param xiface the interface number
+ * @param index the port's index
+ */
+bool cvmx_helper_get_port_phy_present(int xiface, int index);
+void cvmx_helper_set_port_phy_present(int xiface, int index, bool value);
+
+/**
+ * @INTERNAL
+ * Return the AGL port rx clock skew, only used
+ * if agl_rx_clock_delay_bypass is set.
+ *
+ * @param interface the interface number
+ * @param index the port's index number
+ */
+u8 cvmx_helper_get_agl_rx_clock_skew(int interface, int index);
+void cvmx_helper_set_agl_rx_clock_skew(int interface, int index, u8 value);
+u8 cvmx_helper_get_agl_refclk_sel(int interface, int index);
+void cvmx_helper_set_agl_refclk_sel(int interface, int index, u8 value);
+
+/**
+ * @INTERNAL
+ * Store the FDT node offset in the device tree of a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param node_offset node offset to store
+ */
+void cvmx_helper_set_port_fdt_node_offset(int xiface, int index, int node_offset);
+
+/**
+ * @INTERNAL
+ * Return the FDT node offset in the device tree of a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @return node offset of port or -1 if invalid
+ */
+int cvmx_helper_get_port_fdt_node_offset(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Store the FDT node offset in the device tree of a phy
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param node_offset node offset to store
+ */
+void cvmx_helper_set_phy_fdt_node_offset(int xiface, int index, int node_offset);
+
+/**
+ * @INTERNAL
+ * Return the FDT node offset in the device tree of a phy
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @return node offset of phy or -1 if invalid
+ */
+int cvmx_helper_get_phy_fdt_node_offset(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Override default autonegotiation for a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param enable true to enable autonegotiation, false to force full
+ * duplex, full speed.
+ */
+void cvmx_helper_set_port_autonegotiation(int xiface, int index, bool enable);
+
+/**
+ * @INTERNAL
+ * Returns if autonegotiation is enabled or not.
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return 0 if autonegotiation is disabled, 1 if enabled.
+ */
+bool cvmx_helper_get_port_autonegotiation(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Returns if forward error correction is enabled or not.
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return 0 if fec is disabled, 1 if enabled.
+ */
+bool cvmx_helper_get_port_fec(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Override default forward error correction for a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param enable true to enable fec, false to disable.
+ */
+void cvmx_helper_set_port_fec(int xiface, int index, bool enable);
+
+/**
+ * @INTERNAL
+ * Configure the SRIO RX interface AGC settings in host mode
+ *
+ * @param xiface node and interface
+ * @param index lane
+ * @param long_run true for long run, false for short run
+ * @param agc_override true to put AGC in manual mode
+ * @param ctle_zero RX equalizer peaking control (default 0x6)
+ * @param agc_pre_ctle AGC pre-CTLE gain (default 0x5)
+ * @param agc_post_ctle AGC post-CTLE gain (default 0x4)
+ *
+ * NOTE: This must be called before SRIO is initialized to take effect
+ */
+void cvmx_helper_set_srio_rx(int xiface, int index, bool long_run, bool ctle_zero_override,
+ u8 ctle_zero, bool agc_override, u8 agc_pre_ctle, u8 agc_post_ctle);
+
+/**
+ * @INTERNAL
+ * Get the SRIO RX interface AGC settings for host mode
+ *
+ * @param xiface node and interface
+ * @param index lane
+ * @param long_run true for long run, false for short run
+ * @param[out] ctle_zero_override true if overridden
+ * @param[out] ctle_zero RX equalizer peaking control (default 0x6)
+ * @param[out] agc_override true to put AGC in manual mode
+ * @param[out] agc_pre_ctle AGC pre-CTLE gain (default 0x5)
+ * @param[out] agc_post_ctle AGC post-CTLE gain (default 0x4)
+ */
+void cvmx_helper_get_srio_rx(int xiface, int index, bool long_run, bool *ctle_zero_override,
+ u8 *ctle_zero, bool *agc_override, u8 *agc_pre_ctle,
+ u8 *agc_post_ctle);
+
+/**
+ * @INTERNAL
+ * Configure the SRIO TX interface for host mode
+ *
+ * @param xiface node and interface
+ * @param index lane
+ * @param long_run true for long run, false for short run
+ * @param tx_swing tx swing value to use (default 0x7), -1 to not
+ * override.
+ * @param tx_gain PCS SDS TX gain (default 0x3), -1 to not
+ * override
+ * @param tx_premptap_override true to override preemphasis control
+ * @param tx_premptap_pre preemphasis pre tap value (default 0x0)
+ * @param tx_premptap_post preemphasis post tap value (default 0xF)
+ * @param tx_vboost vboost enable (1 = enable, -1 = don't override)
+ * hardware default is 1.
+ *
+ * NOTE: This must be called before SRIO is initialized to take effect
+ */
+void cvmx_helper_set_srio_tx(int xiface, int index, bool long_run, int tx_swing, int tx_gain,
+ bool tx_premptap_override, u8 tx_premptap_pre, u8 tx_premptap_post,
+ int tx_vboost);
+
+/**
+ * @INTERNAL
+ * Get the SRIO TX interface settings for host mode
+ *
+ * @param xiface node and interface
+ * @param index lane
+ * @param long_run true for long run, false for short run
+ * @param[out] tx_swing_override true to override pcs_sds_txX_swing
+ * @param[out] tx_swing tx swing value to use (default 0x7)
+ * @param[out] tx_gain_override true to override default gain
+ * @param[out] tx_gain PCS SDS TX gain (default 0x3)
+ * @param[out] tx_premptap_override true to override preemphasis control
+ * @param[out] tx_premptap_pre preemphasis pre tap value (default 0x0)
+ * @param[out] tx_premptap_post preemphasis post tap value (default 0xF)
+ * @param[out] tx_vboost_override override vboost setting
+ * @param[out] tx_vboost vboost enable (default true)
+ */
+void cvmx_helper_get_srio_tx(int xiface, int index, bool long_run, bool *tx_swing_override,
+ u8 *tx_swing, bool *tx_gain_override, u8 *tx_gain,
+ bool *tx_premptap_override, u8 *tx_premptap_pre, u8 *tx_premptap_post,
+ bool *tx_vboost_override, bool *tx_vboost);
+
+/**
+ * @INTERNAL
+ * Sets the PHY info data structure
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param[in] phy_info phy information data structure pointer
+ */
+void cvmx_helper_set_port_phy_info(int xiface, int index, struct cvmx_phy_info *phy_info);
+/**
+ * @INTERNAL
+ * Returns the PHY information data structure for a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return pointer to PHY information data structure or NULL if not set
+ */
+struct cvmx_phy_info *cvmx_helper_get_port_phy_info(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Returns a pointer to the PHY LED configuration (if local GPIOs drive them)
+ *
+ * @param xiface node and interface
+ * @param index portindex
+ *
+ * @return pointer to the PHY LED information data structure or NULL if not
+ * present
+ */
+struct cvmx_phy_gpio_leds *cvmx_helper_get_port_phy_leds(int xiface, int index);
+
+/**
+ * @INTERNAL
+ * Sets a pointer to the PHY LED configuration (if local GPIOs drive them)
+ *
+ * @param xiface node and interface
+ * @param index portindex
+ * @param leds pointer to led data structure
+ */
+void cvmx_helper_set_port_phy_leds(int xiface, int index, struct cvmx_phy_gpio_leds *leds);
+
+/**
+ * @INTERNAL
+ * Disables RGMII TX clock bypass and sets delay value
+ *
+ * @param xiface node and interface
+ * @param index portindex
+ * @param bypass Set true to enable the clock bypass and false
+ * to sync clock and data synchronously.
+ * Default is false.
+ * @param clk_delay Delay value to skew TXC from TXD
+ */
+void cvmx_helper_cfg_set_rgmii_tx_clk_delay(int xiface, int index, bool bypass, int clk_delay);
+
+/**
+ * @INTERNAL
+ * Gets RGMII TX clock bypass and delay value
+ *
+ * @param xiface node and interface
+ * @param index portindex
+ * @param bypass Set true to enable the clock bypass and false
+ * to sync clock and data synchronously.
+ * Default is false.
+ * @param clk_delay Delay value to skew TXC from TXD, default is 0.
+ */
+void cvmx_helper_cfg_get_rgmii_tx_clk_delay(int xiface, int index, bool *bypass, int *clk_delay);
+
+/**
+ * @INTERNAL
+ * Retrieve node-specific PKO Queue configuration.
+ *
+ * @param node OCTEON3 node.
+ * @param pkocfg PKO Queue static configuration.
+ */
+int cvmx_helper_pko_queue_config_get(int node, cvmx_user_static_pko_queue_config_t *cfg);
+
+/**
+ * @INTERNAL
+ * Update node-specific PKO Queue configuration.
+ *
+ * @param node OCTEON3 node.
+ * @param pkocfg PKO Queue static configuration.
+ */
+int cvmx_helper_pko_queue_config_set(int node, cvmx_user_static_pko_queue_config_t *cfg);
+
+/**
+ * @INTERNAL
+ * Retrieve the SFP node offset in the device tree
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return offset in device tree or -1 if error or not defined.
+ */
+int cvmx_helper_cfg_get_sfp_fdt_offset(int xiface, int index);
+
+/**
+ * Search for a port based on its FDT node offset
+ *
+ * @param of_offset Node offset of port to search for
+ *
+ * @return ipd_port or -1 if not found
+ */
+int cvmx_helper_cfg_get_ipd_port_by_fdt_node_offset(int of_offset);
+
+/**
+ * @INTERNAL
+ * Sets the SFP node offset
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param sfp_of_offset Offset of SFP node in device tree
+ */
+void cvmx_helper_cfg_set_sfp_fdt_offset(int xiface, int index, int sfp_of_offset);
+
+/**
+ * Search for a port based on its FDT node offset
+ *
+ * @param of_offset Node offset of port to search for
+ * @param[out] xiface xinterface of match
+ * @param[out] index port index of match
+ *
+ * @return 0 if found, -1 if not found
+ */
+int cvmx_helper_cfg_get_xiface_index_by_fdt_node_offset(int of_offset, int *xiface, int *index);
+
+/**
+ * Get data structure defining the Microsemi VSC7224 channel info
+ * or NULL if not present
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return pointer to vsc7224 data structure or NULL if not present
+ */
+struct cvmx_vsc7224_chan *cvmx_helper_cfg_get_vsc7224_chan_info(int xiface, int index);
+
+/**
+ * Sets the Microsemi VSC7224 channel data structure
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param[in] vsc7224_info Microsemi VSC7224 data structure
+ */
+void cvmx_helper_cfg_set_vsc7224_chan_info(int xiface, int index,
+ struct cvmx_vsc7224_chan *vsc7224_chan_info);
+
+/**
+ * Get data structure defining the Avago AVSP5410 phy info
+ * or NULL if not present
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return pointer to avsp5410 data structure or NULL if not present
+ */
+struct cvmx_avsp5410 *cvmx_helper_cfg_get_avsp5410_info(int xiface, int index);
+
+/**
+ * Sets the Avago AVSP5410 phy info data structure
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param[in] avsp5410_info Avago AVSP5410 data structure
+ */
+void cvmx_helper_cfg_set_avsp5410_info(int xiface, int index, struct cvmx_avsp5410 *avsp5410_info);
+
+/**
+ * Gets the SFP data associated with a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * @return pointer to SFP data structure or NULL if none
+ */
+struct cvmx_fdt_sfp_info *cvmx_helper_cfg_get_sfp_info(int xiface, int index);
+
+/**
+ * Sets the SFP data associated with a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param[in] sfp_info port SFP data or NULL for none
+ */
+void cvmx_helper_cfg_set_sfp_info(int xiface, int index, struct cvmx_fdt_sfp_info *sfp_info);
+
+/*
+ * Initializes cvmx with user specified config info.
+ */
+int cvmx_user_static_config(void);
+void cvmx_pko_queue_show(void);
+int cvmx_fpa_pool_init_from_cvmx_config(void);
+int __cvmx_helper_init_port_valid(void);
+
+/**
+ * Returns a pointer to the phy device associated with a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ *
+ * return pointer to phy device or NULL if none
+ */
+struct phy_device *cvmx_helper_cfg_get_phy_device(int xiface, int index);
+
+/**
+ * Sets the phy device associated with a port
+ *
+ * @param xiface node and interface
+ * @param index port index
+ * @param[in] phydev phy device to assiciate
+ */
+void cvmx_helper_cfg_set_phy_device(int xiface, int index, struct phy_device *phydev);
+
+#endif /* __CVMX_HELPER_CFG_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h
new file mode 100644
index 0000000000..9ed13c1626
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Fixes and workaround for Octeon chip errata. This file
+ * contains functions called by cvmx-helper to workaround known
+ * chip errata. For the most part, code doesn't need to call
+ * these functions directly.
+ */
+
+#ifndef __CVMX_HELPER_ERRATA_H__
+#define __CVMX_HELPER_ERRATA_H__
+
+#include "cvmx-wqe.h"
+
+/**
+ * @INTERNAL
+ * Function to adjust internal IPD pointer alignments
+ *
+ * @return 0 on success
+ * !0 on failure
+ */
+int __cvmx_helper_errata_fix_ipd_ptr_alignment(void);
+
+/**
+ * This function needs to be called on all Octeon chips with
+ * errata PKI-100.
+ *
+ * The Size field is 8 too large in WQE and next pointers
+ *
+ * The Size field generated by IPD is 8 larger than it should
+ * be. The Size field is <55:40> of both:
+ * - WORD3 in the work queue entry, and
+ * - the next buffer pointer (which precedes the packet data
+ * in each buffer).
+ *
+ * @param work Work queue entry to fix
+ * @return Zero on success. Negative on failure
+ */
+int cvmx_helper_fix_ipd_packet_chain(cvmx_wqe_t *work);
+
+/**
+ * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass
+ * 1 doesn't work properly. The following code disables 2nd order
+ * CDR for the specified QLM.
+ *
+ * @param qlm QLM to disable 2nd order CDR for.
+ */
+void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm);
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h
new file mode 100644
index 0000000000..d3809aec29
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h
@@ -0,0 +1,568 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * FDT Helper functions similar to those provided to U-Boot.
+ * If compiled for U-Boot, just provide wrappers to the equivalent U-Boot
+ * functions.
+ */
+
+#ifndef __CVMX_HELPER_FDT_H__
+#define __CVMX_HELPER_FDT_H__
+
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <linux/libfdt.h>
+
+#include <mach/cvmx-helper-sfp.h>
+
+enum cvmx_i2c_bus_type {
+ CVMX_I2C_BUS_OCTEON,
+ CVMX_I2C_MUX_PCA9540,
+ CVMX_I2C_MUX_PCA9542,
+ CVMX_I2C_MUX_PCA9543,
+ CVMX_I2C_MUX_PCA9544,
+ CVMX_I2C_MUX_PCA9545,
+ CVMX_I2C_MUX_PCA9546,
+ CVMX_I2C_MUX_PCA9547,
+ CVMX_I2C_MUX_PCA9548,
+ CVMX_I2C_MUX_OTHER
+};
+
+struct cvmx_sfp_mod_info; /** Defined in cvmx-helper-sfp.h */
+struct cvmx_phy_info; /** Defined in cvmx-helper-board.h */
+
+/**
+ * This data structure holds information about various I2C muxes and switches
+ * that may be between a device and the Octeon chip.
+ */
+struct cvmx_fdt_i2c_bus_info {
+ /** Parent I2C bus, NULL if root */
+ struct cvmx_fdt_i2c_bus_info *parent;
+ /** Child I2C bus or NULL if last entry in the chain */
+ struct cvmx_fdt_i2c_bus_info *child;
+ /** Offset in device tree */
+ int of_offset;
+ /** Type of i2c bus or mux */
+ enum cvmx_i2c_bus_type type;
+ /** I2C address of mux */
+ u8 i2c_addr;
+ /** Mux channel number */
+ u8 channel;
+ /** For muxes, the bit(s) to set to enable them */
+ u8 enable_bit;
+ /** True if mux, false if switch */
+ bool is_mux;
+};
+
+/**
+ * Data structure containing information about SFP/QSFP slots
+ */
+struct cvmx_fdt_sfp_info {
+ /** Used for a linked list of slots */
+ struct cvmx_fdt_sfp_info *next, *prev;
+ /** Used when multiple SFP ports share the same IPD port */
+ struct cvmx_fdt_sfp_info *next_iface_sfp;
+ /** Name from device tree of slot */
+ const char *name;
+ /** I2C bus for slot EEPROM */
+ struct cvmx_fdt_i2c_bus_info *i2c_bus;
+ /** Data from SFP or QSFP EEPROM */
+ struct cvmx_sfp_mod_info sfp_info;
+ /** Data structure with PHY information */
+ struct cvmx_phy_info *phy_info;
+ /** IPD port(s) slot is connected to */
+ int ipd_port[4];
+ /** Offset in device tree of slot */
+ int of_offset;
+ /** EEPROM address of SFP module (usually 0x50) */
+ u8 i2c_eeprom_addr;
+ /** Diagnostic address of SFP module (usually 0x51) */
+ u8 i2c_diag_addr;
+ /** True if QSFP module */
+ bool is_qsfp;
+ /** True if EEPROM data is valid */
+ bool valid;
+ /** SFP tx_disable GPIO descriptor */
+ struct cvmx_fdt_gpio_info *tx_disable;
+ /** SFP mod_abs/QSFP mod_prs GPIO descriptor */
+ struct cvmx_fdt_gpio_info *mod_abs;
+ /** SFP tx_error GPIO descriptor */
+ struct cvmx_fdt_gpio_info *tx_error;
+ /** SFP rx_los GPIO discriptor */
+ struct cvmx_fdt_gpio_info *rx_los;
+ /** QSFP select GPIO descriptor */
+ struct cvmx_fdt_gpio_info *select;
+ /** QSFP reset GPIO descriptor */
+ struct cvmx_fdt_gpio_info *reset;
+ /** QSFP interrupt GPIO descriptor */
+ struct cvmx_fdt_gpio_info *interrupt;
+ /** QSFP lp_mode GPIO descriptor */
+ struct cvmx_fdt_gpio_info *lp_mode;
+ /** Last mod_abs value */
+ int last_mod_abs;
+ /** Last rx_los value */
+ int last_rx_los;
+ /** Function to call to check mod_abs */
+ int (*check_mod_abs)(struct cvmx_fdt_sfp_info *sfp_info, void *data);
+ /** User-defined data to pass to check_mod_abs */
+ void *mod_abs_data;
+ /** Function to call when mod_abs changes */
+ int (*mod_abs_changed)(struct cvmx_fdt_sfp_info *sfp_info, int val, void *data);
+ /** User-defined data to pass to mod_abs_changed */
+ void *mod_abs_changed_data;
+ /** Function to call when rx_los changes */
+ int (*rx_los_changed)(struct cvmx_fdt_sfp_info *sfp_info, int val, void *data);
+ /** User-defined data to pass to rx_los_changed */
+ void *rx_los_changed_data;
+ /** True if we're connected to a Microsemi VSC7224 reclocking chip */
+ bool is_vsc7224;
+ /** Data structure for first vsc7224 channel we're attached to */
+ struct cvmx_vsc7224_chan *vsc7224_chan;
+ /** True if we're connected to a Avago AVSP5410 phy */
+ bool is_avsp5410;
+ /** Data structure for avsp5410 phy we're attached to */
+ struct cvmx_avsp5410 *avsp5410;
+ /** xinterface we're on */
+ int xiface;
+ /** port index */
+ int index;
+};
+
+/**
+ * Look up a phandle and follow it to its node then return the offset of that
+ * node.
+ *
+ * @param[in] fdt_addr pointer to FDT blob
+ * @param node node to read phandle from
+ * @param[in] prop_name name of property to find
+ * @param[in,out] lenp Number of phandles, input max number
+ * @param[out] nodes Array of phandle nodes
+ *
+ * @return -ve error code on error or 0 for success
+ */
+int cvmx_fdt_lookup_phandles(const void *fdt_addr, int node, const char *prop_name, int *lenp,
+ int *nodes);
+
+/**
+ * Helper to return the address property
+ *
+ * @param[in] fdt_addr pointer to FDT blob
+ * @param node node to read address from
+ * @param prop_name property name to read
+ *
+ * @return address of property or FDT_ADDR_T_NONE if not found
+ */
+static inline fdt_addr_t cvmx_fdt_get_addr(const void *fdt_addr, int node, const char *prop_name)
+{
+ return fdtdec_get_addr(fdt_addr, node, prop_name);
+}
+
+/**
+ * Helper function to return an integer property
+ *
+ * @param[in] fdt_addr pointer to FDT blob
+ * @param node node to read integer from
+ * @param[in] prop_name property name to read
+ * @param default_val default value to return if property doesn't exist
+ *
+ * @return integer value of property or default_val if it doesn't exist.
+ */
+static inline int cvmx_fdt_get_int(const void *fdt_addr, int node, const char *prop_name,
+ int default_val)
+{
+ return fdtdec_get_int(fdt_addr, node, prop_name, default_val);
+}
+
+static inline bool cvmx_fdt_get_bool(const void *fdt_addr, int node, const char *prop_name)
+{
+ return fdtdec_get_bool(fdt_addr, node, prop_name);
+}
+
+static inline u64 cvmx_fdt_get_uint64(const void *fdt_addr, int node, const char *prop_name,
+ u64 default_val)
+{
+ return fdtdec_get_uint64(fdt_addr, node, prop_name, default_val);
+}
+
+/**
+ * Look up a phandle and follow it to its node then return the offset of that
+ * node.
+ *
+ * @param[in] fdt_addr pointer to FDT blob
+ * @param node node to read phandle from
+ * @param[in] prop_name name of property to find
+ *
+ * @return node offset if found, -ve error code on error
+ */
+static inline int cvmx_fdt_lookup_phandle(const void *fdt_addr, int node, const char *prop_name)
+{
+ return fdtdec_lookup_phandle(fdt_addr, node, prop_name);
+}
+
+/**
+ * Translate an address from the device tree into a CPU physical address by
+ * walking up the device tree and applying bus mappings along the way.
+ *
+ * This uses #size-cells and #address-cells.
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param node node to start translating from
+ * @param[in] in_addr Address to translate
+ * NOTE: in_addr must be in the native ENDIAN
+ * format.
+ *
+ * @return Translated address or FDT_ADDR_T_NONE if address cannot be
+ * translated.
+ */
+static inline u64 cvmx_fdt_translate_address(const void *fdt_addr, int node, const u32 *in_addr)
+{
+ return fdt_translate_address((void *)fdt_addr, node, in_addr);
+}
+
+/**
+ * Compare compatibile strings in the flat device tree.
+ *
+ * @param[in] s1 First string to compare
+ * @param[in] sw Second string to compare
+ *
+ * @return 0 if no match
+ * 1 if only the part number matches and not the manufacturer
+ * 2 if both the part number and manufacturer match
+ */
+int cvmx_fdt_compat_match(const char *s1, const char *s2);
+
+/**
+ * Returns whether a list of strings contains the specified string
+ *
+ * @param[in] slist String list
+ * @param llen string list total length
+ * @param[in] str string to search for
+ *
+ * @return 1 if string list contains string, 0 if it does not.
+ */
+int cvmx_fdt_compat_list_contains(const char *slist, int llen, const char *str);
+
+/**
+ * Check if a node is compatible with the specified compat string
+ *
+ * @param[in] fdt_addr FDT address
+ * @param node node offset to check
+ * @param[in] compat compatible string to check
+ *
+ * @return 0 if compatible, 1 if not compatible, error if negative
+ */
+int cvmx_fdt_node_check_compatible(const void *fdt_addr, int node, const char *compat);
+
+/**
+ * @INTERNAL
+ * Compares a string to a compatible field.
+ *
+ * @param[in] compat compatible string
+ * @param[in] str string to check
+ *
+ * @return 0 if not compatible, 1 if manufacturer compatible, 2 if
+ * part is compatible, 3 if both part and manufacturer are
+ * compatible.
+ */
+int __cvmx_fdt_compat_match(const char *compat, const char *str);
+
+/**
+ * Given a phandle to a GPIO device return the type of GPIO device it is.
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param phandle phandle to GPIO
+ * @param[out] size Number of pins (optional, may be NULL)
+ *
+ * @return Type of GPIO device or PIN_ERROR if error
+ */
+enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, int *size);
+
+/**
+ * Given a phandle to a GPIO node output the i2c bus and address
+ *
+ * @param[in] fdt_addr Address of FDT
+ * @param phandle phandle of GPIO device
+ * @param[out] bus TWSI bus number with node in bits 1-3, can be
+ * NULL for none.
+ * @param[out] addr TWSI address number, can be NULL for none
+ *
+ * @return 0 for success, error otherwise
+ */
+int cvmx_fdt_get_twsi_gpio_bus_addr(const void *fdt_addr, int phandle, int *bus, int *addr);
+
+/**
+ * Given a FDT node return the CPU node number
+ *
+ * @param[in] fdt_addr Address of FDT
+ * @param node FDT node number
+ *
+ * @return CPU node number or error if negative
+ */
+int cvmx_fdt_get_cpu_node(const void *fdt_addr, int node);
+
+/**
+ * Get the total size of the flat device tree
+ *
+ * @param[in] fdt_addr Address of FDT
+ *
+ * @return Size of flat device tree in bytes or -1 if error.
+ */
+int cvmx_fdt_get_fdt_size(const void *fdt_addr);
+
+/**
+ * Returns if a node is compatible with one of the items in the string list
+ *
+ * @param[in] fdt_addr Pointer to flat device tree
+ * @param node Node offset to check
+ * @param[in] strlist Array of FDT device compatibility strings,
+ * must end with NULL or empty string.
+ *
+ * @return 0 if at least one item matches, 1 if no matches
+ */
+int cvmx_fdt_node_check_compatible_list(const void *fdt_addr, int node, const char *const *strlist);
+
+/**
+ * Given a FDT node, return the next compatible node.
+ *
+ * @param[in] fdt_addr Pointer to flat device tree
+ * @param start_offset Starting node offset or -1 to find the first
+ * @param strlist Array of FDT device compatibility strings, must
+ * end with NULL or empty string.
+ *
+ * @return next matching node or -1 if no more matches.
+ */
+int cvmx_fdt_node_offset_by_compatible_list(const void *fdt_addr, int startoffset,
+ const char *const *strlist);
+
+/**
+ * Given the parent offset of an i2c device build up a list describing the bus
+ * which can contain i2c muxes and switches.
+ *
+ * @param[in] fdt_addr address of device tree
+ * @param of_offset Offset of the parent node of a GPIO device in
+ * the device tree.
+ *
+ * @return pointer to list of i2c devices starting from the root which
+ * can include i2c muxes and switches or NULL if error. Note that
+ * all entries are allocated on the heap.
+ *
+ * @see cvmx_fdt_free_i2c_bus()
+ */
+struct cvmx_fdt_i2c_bus_info *cvmx_fdt_get_i2c_bus(const void *fdt_addr, int of_offset);
+
+/**
+ * Return the Octeon bus number for a bus descriptor
+ *
+ * @param[in] bus bus descriptor
+ *
+ * @return Octeon twsi bus number or -1 on error
+ */
+int cvmx_fdt_i2c_get_root_bus(const struct cvmx_fdt_i2c_bus_info *bus);
+
+/**
+ * Frees all entries for an i2c bus descriptor
+ *
+ * @param bus bus to free
+ *
+ * @return 0
+ */
+int cvmx_fdt_free_i2c_bus(struct cvmx_fdt_i2c_bus_info *bus);
+
+/**
+ * Given the bus to a device, enable it.
+ *
+ * @param[in] bus i2c bus descriptor to enable or disable
+ * @param enable set to true to enable, false to disable
+ *
+ * @return 0 for success or -1 for invalid bus
+ *
+ * This enables the entire bus including muxes and switches in the path.
+ */
+int cvmx_fdt_enable_i2c_bus(const struct cvmx_fdt_i2c_bus_info *bus, bool enable);
+
+/**
+ * Return a GPIO handle given a GPIO phandle of the form <&gpio pin flags>
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param of_offset node offset for property
+ * @param prop_name name of property
+ *
+ * @return pointer to GPIO handle or NULL if error
+ */
+struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, int of_offset,
+ const char *prop_name);
+
+/**
+ * Sets a GPIO pin given the GPIO descriptor
+ *
+ * @param pin GPIO pin descriptor
+ * @param value value to set it to, 0 or 1
+ *
+ * @return 0 on success, -1 on error.
+ *
+ * NOTE: If the CVMX_GPIO_ACTIVE_LOW flag is set then the output value will be
+ * inverted.
+ */
+int cvmx_fdt_gpio_set(struct cvmx_fdt_gpio_info *pin, int value);
+
+/**
+ * Given a GPIO pin descriptor, input the value of that pin
+ *
+ * @param pin GPIO pin descriptor
+ *
+ * @return 0 if low, 1 if high, -1 on error. Note that the input will be
+ * inverted if the CVMX_GPIO_ACTIVE_LOW flag bit is set.
+ */
+int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin);
+
+/**
+ * Assigns an IPD port to a SFP slot
+ *
+ * @param sfp Handle to SFP data structure
+ * @param ipd_port Port to assign it to
+ *
+ * @return 0 for success, -1 on error
+ */
+int cvmx_sfp_set_ipd_port(struct cvmx_fdt_sfp_info *sfp, int ipd_port);
+
+/**
+ * Get the IPD port of a SFP slot
+ *
+ * @param[in] sfp Handle to SFP data structure
+ *
+ * @return IPD port number for SFP slot
+ */
+static inline int cvmx_sfp_get_ipd_port(const struct cvmx_fdt_sfp_info *sfp)
+{
+ return sfp->ipd_port[0];
+}
+
+/**
+ * Get the IPD ports for a QSFP port
+ *
+ * @param[in] sfp Handle to SFP data structure
+ * @param[out] ipd_ports IPD ports for each lane, if running as 40G then
+ * only ipd_ports[0] is valid and the others will
+ * be set to -1.
+ */
+static inline void cvmx_qsfp_get_ipd_ports(const struct cvmx_fdt_sfp_info *sfp, int ipd_ports[4])
+{
+ int i;
+
+ for (i = 0; i < 4; i++)
+ ipd_ports[i] = sfp->ipd_port[i];
+}
+
+/**
+ * Attaches a PHY to a SFP or QSFP.
+ *
+ * @param sfp sfp to attach PHY to
+ * @param phy_info phy descriptor to attach or NULL to detach
+ */
+void cvmx_sfp_attach_phy(struct cvmx_fdt_sfp_info *sfp, struct cvmx_phy_info *phy_info);
+
+/**
+ * Returns a phy descriptor for a SFP slot
+ *
+ * @param[in] sfp SFP to get phy info from
+ *
+ * @return phy descriptor or NULL if none.
+ */
+static inline struct cvmx_phy_info *cvmx_sfp_get_phy_info(const struct cvmx_fdt_sfp_info *sfp)
+{
+ return sfp->phy_info;
+}
+
+/**
+ * @INTERNAL
+ * Parses all instances of the Vitesse VSC7224 reclocking chip
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ *
+ * @return 0 for success, error otherwise
+ */
+int __cvmx_fdt_parse_vsc7224(const void *fdt_addr);
+
+/**
+ * @INTERNAL
+ * Parses all instances of the Avago AVSP5410 gearbox phy
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ *
+ * @return 0 for success, error otherwise
+ */
+int __cvmx_fdt_parse_avsp5410(const void *fdt_addr);
+
+/**
+ * Parse SFP information from device tree
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ *
+ * @return pointer to sfp info or NULL if error
+ */
+struct cvmx_fdt_sfp_info *cvmx_helper_fdt_parse_sfp_info(const void *fdt_addr, int of_offset);
+
+/**
+ * @INTERNAL
+ * Parses either a CS4343 phy or a slice of the phy from the device tree
+ * @param[in] fdt_addr Address of FDT
+ * @param of_offset offset of slice or phy in device tree
+ * @param phy_info phy_info data structure to fill in
+ *
+ * @return 0 for success, -1 on error
+ */
+int cvmx_fdt_parse_cs4343(const void *fdt_addr, int of_offset, struct cvmx_phy_info *phy_info);
+
+/**
+ * Given an i2c bus and device address, write an 8 bit value
+ *
+ * @param bus i2c bus number
+ * @param addr i2c device address (7 bits)
+ * @param val 8-bit value to write
+ *
+ * This is just an abstraction to ease support in both U-Boot and SE.
+ */
+void cvmx_fdt_i2c_reg_write(int bus, int addr, u8 val);
+
+/**
+ * Read an 8-bit value from an i2c bus and device address
+ *
+ * @param bus i2c bus number
+ * @param addr i2c device address (7 bits)
+ *
+ * @return 8-bit value or error if negative
+ */
+int cvmx_fdt_i2c_reg_read(int bus, int addr);
+
+/**
+ * Write an 8-bit value to a register indexed i2c device
+ *
+ * @param bus i2c bus number to write to
+ * @param addr i2c device address (7 bits)
+ * @param reg i2c 8-bit register address
+ * @param val 8-bit value to write
+ *
+ * @return 0 for success, otherwise error
+ */
+int cvmx_fdt_i2c_write8(int bus, int addr, int reg, u8 val);
+
+/**
+ * Read an 8-bit value from a register indexed i2c device
+ *
+ * @param bus i2c bus number to write to
+ * @param addr i2c device address (7 bits)
+ * @param reg i2c 8-bit register address
+ *
+ * @return value or error if negative
+ */
+int cvmx_fdt_i2c_read8(int bus, int addr, int reg);
+
+int cvmx_sfp_vsc7224_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp_info,
+ int val, void *data);
+int cvmx_sfp_avsp5410_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp_info,
+ int val, void *data);
+
+#endif /* CVMX_HELPER_FDT_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h
new file mode 100644
index 0000000000..8b3a89bce4
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions for FPA setup.
+ */
+
+#ifndef __CVMX_HELPER_H_FPA__
+#define __CVMX_HELPER_H_FPA__
+
+/**
+ * Allocate memory and initialize the FPA pools using memory
+ * from cvmx-bootmem. Sizes of each element in the pools is
+ * controlled by the cvmx-config.h header file. Specifying
+ * zero for any parameter will cause that FPA pool to not be
+ * setup. This is useful if you aren't using some of the
+ * hardware and want to save memory.
+ *
+ * @param packet_buffers
+ * Number of packet buffers to allocate
+ * @param work_queue_entries
+ * Number of work queue entries
+ * @param pko_buffers
+ * PKO Command buffers. You should at minimum have two per
+ * each PKO queue.
+ * @param tim_buffers
+ * TIM ring buffer command queues. At least two per timer bucket
+ * is recommended.
+ * @param dfa_buffers
+ * DFA command buffer. A relatively small (32 for example)
+ * number should work.
+ * @return Zero on success, non-zero if out of memory
+ */
+int cvmx_helper_initialize_fpa(int packet_buffers, int work_queue_entries, int pko_buffers,
+ int tim_buffers, int dfa_buffers);
+
+int __cvmx_helper_initialize_fpa_pool(int pool, u64 buffer_size, u64 buffers, const char *name);
+
+int cvmx_helper_shutdown_fpa_pools(int node);
+
+void cvmx_helper_fpa_dump(int node);
+
+#endif /* __CVMX_HELPER_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h
new file mode 100644
index 0000000000..787eccf4aa
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h
@@ -0,0 +1,427 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Defines some GPIO information used in multiple places
+ */
+
+#ifndef __CVMX_HELPER_GPIO_H__
+#define __CVMX_HELPER_GPIO_H__
+
+#define CVMX_GPIO_NAME_LEN 32 /** Length of name */
+
+enum cvmx_gpio_type {
+ CVMX_GPIO_PIN_OCTEON, /** GPIO pin is directly connected to OCTEON */
+ CVMX_GPIO_PIN_PCA953X, /** GPIO pin is NXP PCA953X compat chip */
+ CVMX_GPIO_PIN_PCA957X,
+ CVMX_GPIO_PIN_PCF857X, /** GPIO pin is NXP PCF857X compat chip */
+ CVMX_GPIO_PIN_PCA9698, /** GPIO pin is NXP PCA9698 compat chip */
+ CVMX_GPIO_PIN_CS4343, /** Inphi/Cortina CS4343 GPIO pins */
+ CVMX_GPIO_PIN_OTHER, /** GPIO pin is something else */
+};
+
+enum cvmx_gpio_operation {
+ CVMX_GPIO_OP_CONFIG, /** Initial configuration of the GPIO pin */
+ CVMX_GPIO_OP_SET, /** Set pin */
+ CVMX_GPIO_OP_CLEAR, /** Clear pin */
+ CVMX_GPIO_OP_READ, /** Read pin */
+ CVMX_GPIO_OP_TOGGLE, /** Toggle pin */
+ CVMX_GPIO_OP_BLINK_START, /** Put in blink mode (if supported) */
+ CVMX_GPIO_OP_BLINK_STOP, /** Takes the pin out of blink mode */
+ CVMX_GPIO_OP_SET_LINK, /** Put in link monitoring mode */
+ CVMX_GPIO_OP_SET_ACT, /** Put in RX activity mode */
+};
+
+/**
+ * Inphi CS4343 output source select values for the GPIO_GPIOX output_src_sel.
+ */
+enum cvmx_inphi_cs4343_gpio_gpio_output_src_sel {
+ GPIO_SEL_DRIVE = 0, /** Value of GPIOX_DRIVE */
+ GPIO_SEL_DELAY = 1, /** Drive delayed */
+ GPIO_SEL_TOGGLE = 2, /** Used for blinking */
+ GPIO_SEL_EXT = 3, /** External function */
+ GPIO_SEL_EXT_DELAY = 4, /** External function delayed */
+};
+
+/** Inphi GPIO_GPIOX configuration register */
+union cvmx_inphi_cs4343_gpio_cfg_reg {
+ u16 u;
+ struct {
+u16: 4;
+ /** Data source for the GPIO output */
+ u16 output_src_sel : 3;
+ /** 1 = GPIO output is inverted before being output */
+ u16 invert_output : 1;
+ /** 1 = GPIO input is inverted before being processed */
+ u16 invert_input : 1;
+ /** 0 = 2.5v/1.8v signalling, 1 = 1.2v signalling */
+ u16 iovddsel_1v2 : 1;
+ /**
+ * 0 = output selected by outen bit
+ * 1 = output controlled by selected GPIO output source
+ */
+ u16 outen_ovr : 1;
+ /** 0 = GPIO is input only, 1 = GPIO output driver enabled */
+ u16 outen : 1;
+u16: 2;
+ u16 pullup_1k; /** 1 = enable 1K pad pullup */
+ u16 pullup_10k; /** 1 = enable 10K pad pullup */
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_CFG_OFFSET 0x0
+
+/**
+ * This selects which port the GPIO gets its signals from when configured
+ * as an output.
+ */
+enum cvmx_inphi_cs4343_gpio_output_cfg_port {
+ PORT_0_HOST_RX = 0, /** Port pair 0 host RX */
+ PORT_0_LINE_RX = 1, /** Port pair 0 line RX */
+ PORT_1_HOST_RX = 2, /** Port pair 1 host RX */
+ PORT_1_LINE_RX = 3, /** Port pair 1 line RX */
+ PORT_3_HOST_RX = 4, /** Port pair 3 host RX */
+ PORT_3_LINE_RX = 5, /** Port pair 3 line RX */
+ PORT_2_HOST_RX = 6, /** Port pair 2 host RX */
+ PORT_2_LINE_RX = 7, /** Port pair 2 line RX */
+ COMMON = 8, /** Common */
+};
+
+enum cvmx_inphi_cs4343_gpio_output_cfg_function {
+ RX_LOS = 0, /** Port - 1 = Receive LOS (from DSP) */
+ RX_LOL = 1, /** Port - 1 = Receive LOL (inverted from MSEQ) */
+ EDC_CONVERGED = 2, /** Port - 1 = EDC converged (from DSP) */
+ /** Port - 1 = PRBS checker in sync (inverted from SDS) */
+ RX_PRBS_SYNC = 3,
+ COMMON_LOGIC_0 = 0, /** Common - Logic 0 */
+ COMMON_GPIO1_INPUT = 1, /** Common - GPIO 1 input */
+ COMMON_GPIO2_INPUT = 2, /** Common - GPIO 2 input */
+ COMMON_GPIO3_INPUT = 3, /** Common - GPIO 3 input */
+ COMMON_GPIO4_INPUT = 4, /** Common - GPIO 4 input */
+ COMMON_INTERR_INPUT = 5, /** Common - INTERR input */
+ /** Common - Interrupt output from GLOBAL_INT register */
+ COMMON_GLOBAL_INT = 6,
+ /** Common - Interrupt output from GPIO_INT register */
+ COMMON_GPIO_INT = 7,
+ /** Common - Temp/voltage monitor interrupt */
+ COMMON_MONITOR_INT = 8,
+ /** Common - Selected clock output of global clock monitor */
+ COMMON_GBL_CLKMON_CLK = 9,
+};
+
+union cvmx_inphi_cs4343_gpio_output_cfg {
+ u16 u;
+ struct {
+u16: 8;
+ u16 port : 4; /** port */
+ u16 function : 4; /** function */
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_OUTPUT_CFG_OFFSET 0x1
+
+union cvmx_inphi_cs4343_gpio_drive {
+ u16 u;
+ struct {
+u16: 15;
+ u16 value : 1; /** output value */
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_DRIVE_OFFSET 0x2
+
+union cvmx_inphi_cs4343_gpio_value {
+ u16 u;
+ struct {
+u16: 15;
+ u16 value : 1; /** input value (read-only) */
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_VALUE_OFFSET 0x3
+
+union cvmx_inphi_cs4343_gpio_toggle {
+ u16 u;
+ struct {
+ /** Toggle rate in ms, multiply by 2 to get period in ms */
+ u16 rate : 16;
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_TOGGLE_OFFSET 0x4
+
+union cvmx_inphi_cs4343_gpio_delay {
+ u16 u;
+ struct {
+ /** On delay for GPIO output in ms when enabled */
+ u16 on_delay : 16;
+ } s;
+};
+
+#define CVMX_INPHI_CS4343_GPIO_DELAY_OFFSET 0x5
+
+/**
+ * GPIO flags associated with a GPIO pin (can be combined)
+ */
+enum cvmx_gpio_flags {
+ CVMX_GPIO_ACTIVE_HIGH = 0, /** Active high (default) */
+ CVMX_GPIO_ACTIVE_LOW = 1, /** Active low (inverted) */
+ CVMX_GPIO_OPEN_COLLECTOR = 2, /** Output is open-collector */
+};
+
+/** Default timer number to use for outputting a frequency [0..3] */
+#define CVMX_GPIO_DEFAULT_TIMER 3
+
+/** Configuration data for native Octeon GPIO pins */
+struct cvmx_octeon_gpio_data {
+ int cpu_node; /** CPU node for GPIO pin */
+ int timer; /** Timer number used when in toggle mode, 0-3 */
+};
+
+struct cvmx_pcf857x_gpio_data {
+ unsigned int latch_out;
+};
+
+#define CVMX_INPHI_CS4343_EFUSE_PDF_SKU_REG 0x19f
+#define CVMX_INPHI_CS4343_SKU_CS4223 0x10
+#define CVMX_INPHI_CS4343_SKU_CS4224 0x11
+#define CVMX_INPHI_CS4343_SKU_CS4343 0x12
+#define CVMX_INPHI_CS4343_SKU_CS4221 0x13
+#define CVMX_INPHI_CS4343_SKU_CS4227 0x14
+#define CVMX_INPHI_CS4343_SKU_CS4341 0x16
+
+struct cvmx_cs4343_gpio_data {
+ int reg_offset; /** Base register address for GPIO */
+ enum cvmx_gpio_operation last_op;
+ u8 link_port; /** Link port number for link status */
+ u16 sku; /** Value from CS4224_EFUSE_PDF_SKU register */
+ u8 out_src_sel;
+ u8 field_func;
+ bool out_en;
+ bool is_cs4343; /** True if dual package */
+ struct phy_device *phydev;
+};
+
+struct cvmx_fdt_gpio_info;
+
+/** Function called for GPIO operations */
+typedef int (*cvmx_fdt_gpio_op_func_t)(struct cvmx_fdt_gpio_info *, enum cvmx_gpio_operation);
+
+/**
+ * GPIO descriptor
+ */
+struct cvmx_fdt_gpio_info {
+ struct cvmx_fdt_gpio_info *next; /** For list of GPIOs */
+ char name[CVMX_GPIO_NAME_LEN]; /** Name of GPIO */
+ int pin; /** GPIO pin number */
+ enum cvmx_gpio_type gpio_type; /** Type of GPIO controller */
+ int of_offset; /** Offset in device tree */
+ int phandle;
+ struct cvmx_fdt_i2c_bus_info *i2c_bus; /** I2C bus descriptor */
+ int i2c_addr; /** Address on i2c bus */
+ enum cvmx_gpio_flags flags; /** Flags associated with pin */
+ int num_pins; /** Total number of pins */
+ unsigned int latch_out; /** Latched output for 857x */
+ /** Rate in ms between toggle states */
+ int toggle_rate;
+ /** Pointer to user data for user-defined functions */
+ void *data;
+ /** Function to set, clear, toggle, etc. */
+ cvmx_fdt_gpio_op_func_t op_func;
+ /* Two values are used to detect the initial case where nothing has
+ * been configured. Initially, all of the following will be false
+ * which will force the initial state to be properly set.
+ */
+ /** True if the GPIO pin is currently set, useful for toggle */
+ bool is_set;
+ /** Set if configured to invert */
+ bool invert_set;
+ /** Set if input is to be inverted */
+ bool invert_input;
+ /** Set if direction is configured as output */
+ bool dir_out;
+ /** Set if direction is configured as input */
+ bool dir_in;
+ /** Pin is set to toggle periodically */
+ bool toggle;
+ /** True if LED is used to indicate link status */
+ bool link_led;
+ /** True if LED is used to indicate rx activity */
+ bool rx_act_led;
+ /** True if LED is used to indicate tx activity */
+ bool tx_act_led;
+ /** True if LED is used to indicate networking errors */
+ bool error_led;
+ /** True if LED can automatically show link */
+ bool hw_link;
+};
+
+/** LED datastructure */
+struct cvmx_fdt_gpio_led {
+ struct cvmx_fdt_gpio_led *next, *prev; /** List of LEDs */
+ char name[CVMX_GPIO_NAME_LEN]; /** Name */
+ struct cvmx_fdt_gpio_info *gpio; /** GPIO for LED */
+ int of_offset; /** Device tree node */
+ /** True if active low, note that GPIO contains this info */
+ bool active_low;
+};
+
+/**
+ * Returns the operation function for the GPIO phandle
+ *
+ * @param[in] fdt_addr Pointer to FDT
+ * @param phandle phandle of GPIO entry
+ *
+ * @return Pointer to op function or NULL if not found.
+ */
+cvmx_fdt_gpio_op_func_t cvmx_fdt_gpio_get_op_func(const void *fdt_addr, int phandle);
+
+/**
+ * Given a phandle to a GPIO device return the type of GPIO device it is.
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param phandle phandle to GPIO
+ * @param[out] size Number of pins (optional, may be NULL)
+ *
+ * @return Type of GPIO device or PIN_ERROR if error
+ */
+enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, int *size);
+
+/**
+ * Return a GPIO handle given a GPIO phandle of the form <&gpio pin flags>
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param of_offset node offset of GPIO device
+ * @param prop_name name of property
+ *
+ * @return pointer to GPIO handle or NULL if error
+ */
+struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info(const void *fdt_addr, int of_offset,
+ const char *prop_name);
+
+/**
+ * Return a GPIO handle given a GPIO phandle of the form <&gpio pin flags>
+ *
+ * @param[in] fdt_addr Address of flat device tree
+ * @param of_offset node offset for property
+ * @param prop_name name of property
+ *
+ * @return pointer to GPIO handle or NULL if error
+ */
+struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, int of_offset,
+ const char *prop_name);
+
+/**
+ * Parses a GPIO entry and fills in the gpio info data structure
+ *
+ * @param[in] fdt_addr Address of FDT
+ * @param phandle phandle for GPIO
+ * @param pin pin number
+ * @param flags flags set (1 = invert)
+ * @param[out] gpio GPIO info data structure
+ *
+ * @return 0 for success, -1 on error
+ */
+int cvmx_fdt_parse_gpio(const void *fdt_addr, int phandle, int pin, u32 flags,
+ struct cvmx_fdt_gpio_info *gpio);
+
+/**
+ * @param gpio GPIO descriptor to assign timer to
+ * @param timer Octeon hardware timer number [0..3]
+ */
+void cvmx_fdt_gpio_set_timer(struct cvmx_fdt_gpio_info *gpio, int timer);
+
+/**
+ * Given a GPIO pin descriptor, input the value of that pin
+ *
+ * @param pin GPIO pin descriptor
+ *
+ * @return 0 if low, 1 if high, -1 on error. Note that the input will be
+ * inverted if the CVMX_GPIO_ACTIVE_LOW flag bit is set.
+ */
+int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin);
+
+/**
+ * Sets a GPIO pin given the GPIO descriptor
+ *
+ * @param gpio GPIO pin descriptor
+ * @param value value to set it to, 0 or 1
+ *
+ * @return 0 on success, -1 on error.
+ *
+ * NOTE: If the CVMX_GPIO_ACTIVE_LOW flag is set then the output value will be
+ * inverted.
+ */
+int cvmx_fdt_gpio_set(struct cvmx_fdt_gpio_info *gpio, int value);
+
+/**
+ * Sets the blink frequency for a GPIO pin
+ *
+ * @param gpio GPIO handle
+ * @param freq Frequency in hz [0..500]
+ */
+void cvmx_fdt_gpio_set_freq(struct cvmx_fdt_gpio_info *gpio, int freq);
+
+/**
+ * Enables or disables blinking a GPIO pin
+ *
+ * @param gpio GPIO handle
+ * @param blink True to start blinking, false to stop
+ *
+ * @return 0 for success, -1 on error
+ * NOTE: Not all GPIO types support blinking.
+ */
+int cvmx_fdt_gpio_set_blink(struct cvmx_fdt_gpio_info *gpio, bool blink);
+
+/**
+ * Alternates between link and blink mode
+ *
+ * @param gpio GPIO handle
+ * @param blink True to start blinking, false to use link status
+ *
+ * @return 0 for success, -1 on error
+ * NOTE: Not all GPIO types support this.
+ */
+int cvmx_fdt_gpio_set_link_blink(struct cvmx_fdt_gpio_info *gpio, bool blink);
+
+static inline bool cvmx_fdt_gpio_hw_link_supported(const struct cvmx_fdt_gpio_info *gpio)
+{
+ return gpio->hw_link;
+}
+
+/**
+ * Configures a GPIO pin as input or output
+ *
+ * @param gpio GPIO pin to configure
+ * @param output Set to true to make output, false for input
+ */
+void cvmx_fdt_gpio_set_output(struct cvmx_fdt_gpio_info *gpio, bool output);
+
+/**
+ * Allocates an LED data structure
+ * @param[in] name name to assign LED
+ * @param of_offset Device tree offset
+ * @param gpio GPIO assigned to LED (can be NULL)
+ * @param last Previous LED to build a list
+ *
+ * @return pointer to LED data structure or NULL if out of memory
+ */
+struct cvmx_fdt_gpio_led *cvmx_alloc_led(const char *name, int of_offset,
+ struct cvmx_fdt_gpio_info *gpio,
+ struct cvmx_fdt_gpio_led *last);
+
+/**
+ * Parses an LED in the device tree
+ *
+ * @param[in] fdt_addr Pointer to flat device tree
+ * @param led_of_offset Device tree offset of LED
+ * @param gpio GPIO data structure to use (can be NULL)
+ * @param last Previous LED if this is a group of LEDs
+ *
+ * @return Pointer to LED data structure or NULL if error
+ */
+struct cvmx_fdt_gpio_led *cvmx_fdt_parse_led(const void *fdt_addr, int led_of_offset,
+ struct cvmx_fdt_gpio_info *gpio,
+ struct cvmx_fdt_gpio_led *last);
+
+#endif /* __CVMX_HELPER_GPIO_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h
new file mode 100644
index 0000000000..29af48e7a1
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for ILK initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_ILK_H__
+#define __CVMX_HELPER_ILK_H__
+
+int __cvmx_helper_ilk_enumerate(int interface);
+
+/**
+ * @INTERNAL
+ * Clear all calendar entries to the xoff state. This
+ * means no data is sent or received.
+ *
+ * @param interface Interface whose calendar are to be initialized.
+ */
+void __cvmx_ilk_clear_cal(int interface);
+
+/**
+ * @INTERNAL
+ * Setup the channel's tx calendar entry.
+ *
+ * @param interface Interface channel belongs to
+ * @param channel Channel whose calendar entry is to be updated
+ * @param bpid Bpid assigned to the channel
+ */
+void __cvmx_ilk_write_tx_cal_entry(int interface, int channel, unsigned char bpid);
+
+/**
+ * @INTERNAL
+ * Setup the channel's rx calendar entry.
+ *
+ * @param interface Interface channel belongs to
+ * @param channel Channel whose calendar entry is to be updated
+ * @param pipe PKO assigned to the channel
+ */
+void __cvmx_ilk_write_rx_cal_entry(int interface, int channel, unsigned char pipe);
+
+/**
+ * @INTERNAL
+ * Probe a ILK interface and determine the number of ports
+ * connected to it. The ILK interface should still be down after
+ * this call.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_ilk_probe(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a ILK interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_ilk_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by ILK link status.
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_ilk_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_ilk_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+void __cvmx_helper_ilk_show_stats(void);
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-ipd.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-ipd.h
new file mode 100644
index 0000000000..025743d505
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-ipd.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions for IPD
+ */
+
+#ifndef __CVMX_HELPER_IPD_H__
+#define __CVMX_HELPER_IPD_H__
+
+void cvmx_helper_ipd_set_wqe_no_ptr_mode(bool mode);
+void cvmx_helper_ipd_pkt_wqe_le_mode(bool mode);
+int __cvmx_helper_ipd_global_setup(void);
+int __cvmx_helper_ipd_setup_interface(int interface);
+
+#endif /* __CVMX_HELPER_PKI_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h
new file mode 100644
index 0000000000..fa379eaf55
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper utilities for qlm_jtag.
+ */
+
+#ifndef __CVMX_HELPER_JTAG_H__
+#define __CVMX_HELPER_JTAG_H__
+
+/**
+ * The JTAG chain for CN52XX and CN56XX is 4 * 268 bits long, or 1072.
+ * CN5XXX full chain shift is:
+ * new data => lane 3 => lane 2 => lane 1 => lane 0 => data out
+ * The JTAG chain for CN63XX is 4 * 300 bits long, or 1200.
+ * The JTAG chain for CN68XX is 4 * 304 bits long, or 1216.
+ * The JTAG chain for CN66XX/CN61XX/CNF71XX is 4 * 304 bits long, or 1216.
+ * CN6XXX full chain shift is:
+ * new data => lane 0 => lane 1 => lane 2 => lane 3 => data out
+ * Shift LSB first, get LSB out
+ */
+extern const __cvmx_qlm_jtag_field_t __cvmx_qlm_jtag_field_cn63xx[];
+extern const __cvmx_qlm_jtag_field_t __cvmx_qlm_jtag_field_cn66xx[];
+extern const __cvmx_qlm_jtag_field_t __cvmx_qlm_jtag_field_cn68xx[];
+
+#define CVMX_QLM_JTAG_UINT32 40
+
+typedef u32 qlm_jtag_uint32_t[CVMX_QLM_JTAG_UINT32 * 8];
+
+/**
+ * Initialize the internal QLM JTAG logic to allow programming
+ * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions.
+ * These functions should only be used at the direction of Cavium
+ * Networks. Programming incorrect values into the JTAG chain
+ * can cause chip damage.
+ */
+void cvmx_helper_qlm_jtag_init(void);
+
+/**
+ * Write up to 32bits into the QLM jtag chain. Bits are shifted
+ * into the MSB and out the LSB, so you should shift in the low
+ * order bits followed by the high order bits. The JTAG chain for
+ * CN52XX and CN56XX is 4 * 268 bits long, or 1072. The JTAG chain
+ * for CN63XX is 4 * 300 bits long, or 1200.
+ *
+ * @param qlm QLM to shift value into
+ * @param bits Number of bits to shift in (1-32).
+ * @param data Data to shift in. Bit 0 enters the chain first, followed by
+ * bit 1, etc.
+ *
+ * @return The low order bits of the JTAG chain that shifted out of the
+ * circle.
+ */
+u32 cvmx_helper_qlm_jtag_shift(int qlm, int bits, u32 data);
+
+/**
+ * Shift long sequences of zeros into the QLM JTAG chain. It is
+ * common to need to shift more than 32 bits of zeros into the
+ * chain. This function is a convience wrapper around
+ * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of
+ * zeros at a time.
+ *
+ * @param qlm QLM to shift zeros into
+ * @param bits
+ */
+void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits);
+
+/**
+ * Program the QLM JTAG chain into all lanes of the QLM. You must
+ * have already shifted in the proper number of bits into the
+ * JTAG chain. Updating invalid values can possibly cause chip damage.
+ *
+ * @param qlm QLM to program
+ */
+void cvmx_helper_qlm_jtag_update(int qlm);
+
+/**
+ * Load the QLM JTAG chain with data from all lanes of the QLM.
+ *
+ * @param qlm QLM to program
+ */
+void cvmx_helper_qlm_jtag_capture(int qlm);
+
+#endif /* __CVMX_HELPER_JTAG_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h
new file mode 100644
index 0000000000..defd95551a
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for LOOP initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_LOOP_H__
+#define __CVMX_HELPER_LOOP_H__
+
+/**
+ * @INTERNAL
+ * Probe a LOOP interface and determine the number of ports
+ * connected to it. The LOOP interface should still be down after
+ * this call.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_loop_probe(int xiface);
+int __cvmx_helper_loop_enumerate(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a LOOP interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_loop_enable(int xiface);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h
new file mode 100644
index 0000000000..6a600a017c
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for NPI initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_NPI_H__
+#define __CVMX_HELPER_NPI_H__
+
+/**
+ * @INTERNAL
+ * Probe a NPI interface and determine the number of ports
+ * connected to it. The NPI interface should still be down after
+ * this call.
+ *
+ * @param interface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_npi_probe(int interface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a NPI interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_npi_enable(int xiface);
+
+/**
+ * Sets the number of pipe used by SLI packet output in the variable,
+ * which then later used for setting it up in HW
+ */
+void cvmx_npi_config_set_num_pipes(int num_pipes);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
new file mode 100644
index 0000000000..f5933f24fa
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
@@ -0,0 +1,319 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions for PKI
+ */
+
+#ifndef __CVMX_HELPER_PKI_H__
+#define __CVMX_HELPER_PKI_H__
+
+#include "cvmx-pki.h"
+
+/* Modify this if more than 8 ilk channels need to be supported */
+#define CVMX_MAX_PORT_PER_INTERFACE 64
+#define CVMX_MAX_QOS_PRIORITY 64
+#define CVMX_PKI_FIND_AVAILABLE_RSRC (-1)
+
+struct cvmx_pki_qos_schd {
+ cvmx_fpa3_gaura_t _aura;
+ cvmx_fpa3_pool_t _pool;
+ bool pool_per_qos;
+ int pool_num;
+ char *pool_name;
+ u64 pool_buff_size;
+ u64 pool_max_buff;
+ bool aura_per_qos;
+ int aura_num;
+ char *aura_name;
+ u64 aura_buff_cnt;
+ bool sso_grp_per_qos;
+ int sso_grp;
+ u16 port_add;
+ int qpg_base;
+};
+
+struct cvmx_pki_prt_schd {
+ cvmx_fpa3_pool_t _pool;
+ cvmx_fpa3_gaura_t _aura;
+ bool cfg_port;
+ int style;
+ bool pool_per_prt;
+ int pool_num;
+ char *pool_name;
+ u64 pool_buff_size;
+ u64 pool_max_buff;
+ bool aura_per_prt;
+ int aura_num;
+ char *aura_name;
+ u64 aura_buff_cnt;
+ bool sso_grp_per_prt;
+ int sso_grp;
+ enum cvmx_pki_qpg_qos qpg_qos;
+ int qpg_base;
+ struct cvmx_pki_qos_schd qos_s[CVMX_MAX_QOS_PRIORITY];
+};
+
+struct cvmx_pki_intf_schd {
+ cvmx_fpa3_pool_t _pool;
+ cvmx_fpa3_gaura_t _aura;
+ bool style_per_intf;
+ int style;
+ bool pool_per_intf;
+ int pool_num;
+ char *pool_name;
+ u64 pool_buff_size;
+ u64 pool_max_buff;
+ bool aura_per_intf;
+ int aura_num;
+ char *aura_name;
+ u64 aura_buff_cnt;
+ bool sso_grp_per_intf;
+ int sso_grp;
+ bool qos_share_aura;
+ bool qos_share_grp;
+ int qpg_base;
+ struct cvmx_pki_prt_schd prt_s[CVMX_MAX_PORT_PER_INTERFACE];
+};
+
+struct cvmx_pki_global_schd {
+ bool setup_pool;
+ int pool_num;
+ char *pool_name;
+ u64 pool_buff_size;
+ u64 pool_max_buff;
+ bool setup_aura;
+ int aura_num;
+ char *aura_name;
+ u64 aura_buff_cnt;
+ bool setup_sso_grp;
+ int sso_grp;
+ cvmx_fpa3_pool_t _pool;
+ cvmx_fpa3_gaura_t _aura;
+};
+
+struct cvmx_pki_legacy_qos_watcher {
+ bool configured;
+ enum cvmx_pki_term field;
+ u32 data;
+ u32 data_mask;
+ u8 advance;
+ u8 sso_grp;
+};
+
+extern bool cvmx_pki_dflt_init[CVMX_MAX_NODES];
+
+extern struct cvmx_pki_pool_config pki_dflt_pool[CVMX_MAX_NODES];
+extern struct cvmx_pki_aura_config pki_dflt_aura[CVMX_MAX_NODES];
+extern struct cvmx_pki_style_config pki_dflt_style[CVMX_MAX_NODES];
+extern struct cvmx_pki_pkind_config pki_dflt_pkind[CVMX_MAX_NODES];
+extern u64 pkind_style_map[CVMX_MAX_NODES][CVMX_PKI_NUM_PKIND];
+extern struct cvmx_pki_sso_grp_config pki_dflt_sso_grp[CVMX_MAX_NODES];
+extern struct cvmx_pki_legacy_qos_watcher qos_watcher[8];
+
+/**
+ * This function Enabled the PKI hardware to
+ * start accepting/processing packets.
+ * @param node node number
+ */
+void cvmx_helper_pki_enable(int node);
+
+/**
+ * This function frees up PKI resources consumed by that port.
+ * This function should only be called if port resources
+ * (fpa pools aura, style qpg entry pcam entry etc.) are not shared
+ * @param xipd_port ipd port number for which resources need to
+ * be freed.
+ */
+int cvmx_helper_pki_port_shutdown(int xipd_port);
+
+/**
+ * This function shuts down complete PKI hardware
+ * and software resources.
+ * @param node node number where PKI needs to shutdown.
+ */
+void cvmx_helper_pki_shutdown(int node);
+
+/**
+ * This function calculates how mant qpf entries will be needed for
+ * a particular QOS.
+ * @param qpg_qos qos value for which entries need to be calculated.
+ */
+int cvmx_helper_pki_get_num_qpg_entry(enum cvmx_pki_qpg_qos qpg_qos);
+
+/**
+ * This function setups the qos table by allocating qpg entry and writing
+ * the provided parameters to that entry (offset).
+ * @param node node number.
+ * @param qpg_cfg pointer to struct containing qpg configuration
+ */
+int cvmx_helper_pki_set_qpg_entry(int node, struct cvmx_pki_qpg_config *qpg_cfg);
+
+/**
+ * This function sets up aura QOS for RED, backpressure and tail-drop.
+ *
+ * @param node node number.
+ * @param aura aura to configure.
+ * @param ena_red enable RED based on [DROP] and [PASS] levels
+ * 1: enable 0:disable
+ * @param pass_thresh pass threshold for RED.
+ * @param drop_thresh drop threshold for RED
+ * @param ena_bp enable backpressure based on [BP] level.
+ * 1:enable 0:disable
+ * @param bp_thresh backpressure threshold.
+ * @param ena_drop enable tail drop.
+ * 1:enable 0:disable
+ * @return Zero on success. Negative on failure
+ */
+int cvmx_helper_setup_aura_qos(int node, int aura, bool ena_red, bool ena_drop, u64 pass_thresh,
+ u64 drop_thresh, bool ena_bp, u64 bp_thresh);
+
+/**
+ * This function maps specified bpid to all the auras from which it can receive bp and
+ * then maps that bpid to all the channels, that bpid can asserrt bp on.
+ *
+ * @param node node number.
+ * @param aura aura number which will back pressure specified bpid.
+ * @param bpid bpid to map.
+ * @param chl_map array of channels to map to that bpid.
+ * @param chl_cnt number of channel/ports to map to that bpid.
+ * @return Zero on success. Negative on failure
+ */
+int cvmx_helper_pki_map_aura_chl_bpid(int node, u16 aura, u16 bpid, u16 chl_map[], u16 chl_cnt);
+
+/**
+ * This function sets up the global pool, aura and sso group
+ * resources which application can use between any interfaces
+ * and ports.
+ * @param node node number
+ * @param gblsch pointer to struct containing global
+ * scheduling parameters.
+ */
+int cvmx_helper_pki_set_gbl_schd(int node, struct cvmx_pki_global_schd *gblsch);
+
+/**
+ * This function sets up scheduling parameters (pool, aura, sso group etc)
+ * of an ipd port.
+ * @param xipd_port ipd port number
+ * @param prtsch pointer to struct containing port's
+ * scheduling parameters.
+ */
+int cvmx_helper_pki_init_port(int xipd_port, struct cvmx_pki_prt_schd *prtsch);
+
+/**
+ * This function sets up scheduling parameters (pool, aura, sso group etc)
+ * of an interface (all ports/channels on that interface).
+ * @param xiface interface number with node.
+ * @param intfsch pointer to struct containing interface
+ * scheduling parameters.
+ * @param gblsch pointer to struct containing global scheduling parameters
+ * (can be NULL if not used)
+ */
+int cvmx_helper_pki_init_interface(const int xiface, struct cvmx_pki_intf_schd *intfsch,
+ struct cvmx_pki_global_schd *gblsch);
+/**
+ * This function gets all the PKI parameters related to that
+ * particular port from hardware.
+ * @param xipd_port ipd port number to get parameter of
+ * @param port_cfg pointer to structure where to store read parameters
+ */
+void cvmx_pki_get_port_config(int xipd_port, struct cvmx_pki_port_config *port_cfg);
+
+/**
+ * This function sets all the PKI parameters related to that
+ * particular port in hardware.
+ * @param xipd_port ipd port number to get parameter of
+ * @param port_cfg pointer to structure containing port parameters
+ */
+void cvmx_pki_set_port_config(int xipd_port, struct cvmx_pki_port_config *port_cfg);
+
+/**
+ * This function displays all the PKI parameters related to that
+ * particular port.
+ * @param xipd_port ipd port number to display parameter of
+ */
+void cvmx_pki_show_port_config(int xipd_port);
+
+/**
+ * Modifies maximum frame length to check.
+ * It modifies the global frame length set used by this port, any other
+ * port using the same set will get affected too.
+ * @param xipd_port ipd port for which to modify max len.
+ * @param max_size maximum frame length
+ */
+void cvmx_pki_set_max_frm_len(int xipd_port, u32 max_size);
+
+/**
+ * This function sets up all the ports of particular interface
+ * for chosen fcs mode. (only use for backward compatibility).
+ * New application can control it via init_interface calls.
+ * @param node node number.
+ * @param interface interface number.
+ * @param nports number of ports
+ * @param has_fcs 1 -- enable fcs check and fcs strip.
+ * 0 -- disable fcs check.
+ */
+void cvmx_helper_pki_set_fcs_op(int node, int interface, int nports, int has_fcs);
+
+/**
+ * This function sets the wqe buffer mode of all ports. First packet data buffer can reside
+ * either in same buffer as wqe OR it can go in separate buffer. If used the later mode,
+ * make sure software allocate enough buffers to now have wqe separate from packet data.
+ * @param node node number.
+ * @param pkt_outside_wqe 0 = The packet link pointer will be at word [FIRST_SKIP]
+ * immediately followed by packet data, in the same buffer
+ * as the work queue entry.
+ * 1 = The packet link pointer will be at word [FIRST_SKIP] in a new
+ * buffer separate from the work queue entry. Words following the
+ * WQE in the same cache line will be zeroed, other lines in the
+ * buffer will not be modified and will retain stale data (from the
+ * buffer?s previous use). This setting may decrease the peak PKI
+ * performance by up to half on small packets.
+ */
+void cvmx_helper_pki_set_wqe_mode(int node, bool pkt_outside_wqe);
+
+/**
+ * This function sets the Packet mode of all ports and styles to little-endian.
+ * It Changes write operations of packet data to L2C to
+ * be in little-endian. Does not change the WQE header format, which is
+ * properly endian neutral.
+ * @param node node number.
+ */
+void cvmx_helper_pki_set_little_endian(int node);
+
+void cvmx_helper_pki_set_dflt_pool(int node, int pool, int buffer_size, int buffer_count);
+void cvmx_helper_pki_set_dflt_aura(int node, int aura, int pool, int buffer_count);
+void cvmx_helper_pki_set_dflt_pool_buffer(int node, int buffer_count);
+
+void cvmx_helper_pki_set_dflt_aura_buffer(int node, int buffer_count);
+
+void cvmx_helper_pki_set_dflt_pkind_map(int node, int pkind, int style);
+
+void cvmx_helper_pki_get_dflt_style(int node, struct cvmx_pki_style_config *style_cfg);
+void cvmx_helper_pki_set_dflt_style(int node, struct cvmx_pki_style_config *style_cfg);
+
+void cvmx_helper_pki_get_dflt_qpg(int node, struct cvmx_pki_qpg_config *qpg_cfg);
+void cvmx_helper_pki_set_dflt_qpg(int node, struct cvmx_pki_qpg_config *qpg_cfg);
+
+void cvmx_helper_pki_no_dflt_init(int node);
+
+void cvmx_helper_pki_set_dflt_bp_en(int node, bool bp_en);
+
+void cvmx_pki_dump_wqe(const cvmx_wqe_78xx_t *wqp);
+
+int __cvmx_helper_pki_port_setup(int node, int xipd_port);
+
+int __cvmx_helper_pki_global_setup(int node);
+void cvmx_helper_pki_show_port_config(int xipd_port);
+
+int __cvmx_helper_pki_install_dflt_vlan(int node);
+void __cvmx_helper_pki_set_dflt_ltype_map(int node);
+int cvmx_helper_pki_route_dmac(int node, int style, u64 mac_addr, u64 mac_addr_mask,
+ int final_style);
+int cvmx_pki_clone_style(int node, int style, u64 cluster_mask);
+void cvmx_helper_pki_modify_prtgrp(int xipd_port, int grp_ok, int grp_bad);
+int cvmx_helper_pki_route_prt_dmac(int xipd_port, u64 mac_addr, u64 mac_addr_mask, int grp);
+
+void cvmx_helper_pki_errata(int node);
+
+#endif /* __CVMX_HELPER_PKI_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pko.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko.h
new file mode 100644
index 0000000000..806102df22
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * PKO helper, configuration API
+ */
+
+#ifndef __CVMX_HELPER_PKO_H__
+#define __CVMX_HELPER_PKO_H__
+
+/* CSR typedefs have been moved to cvmx-pko-defs.h */
+
+/**
+ * cvmx_override_pko_queue_priority(int ipd_port, u64
+ * priorities[16]) is a function pointer. It is meant to allow
+ * customization of the PKO queue priorities based on the port
+ * number. Users should set this pointer to a function before
+ * calling any cvmx-helper operations.
+ */
+void (*cvmx_override_pko_queue_priority)(int ipd_port, u8 *priorities);
+
+/**
+ * Gets the fpa pool number of pko pool
+ */
+s64 cvmx_fpa_get_pko_pool(void);
+
+/**
+ * Gets the buffer size of pko pool
+ */
+u64 cvmx_fpa_get_pko_pool_block_size(void);
+
+/**
+ * Gets the buffer size of pko pool
+ */
+u64 cvmx_fpa_get_pko_pool_buffer_count(void);
+
+int cvmx_helper_pko_init(void);
+
+/*
+ * This function is a no-op
+ * included here for backwards compatibility only.
+ */
+static inline int cvmx_pko_initialize_local(void)
+{
+ return 0;
+}
+
+int __cvmx_helper_pko_drain(void);
+int __cvmx_helper_interface_setup_pko(int interface);
+
+#endif /* __CVMX_HELPER_PKO_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h
new file mode 100644
index 0000000000..ca8d848bd1
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef __CVMX_HELPER_PKO3_H__
+#define __CVMX_HELPER_PKO3_H__
+
+/*
+ * Initialize PKO3 unit on the current node.
+ *
+ * Covers the common hardware, memory and global configuration.
+ * Per-interface initialization is performed separately.
+ *
+ * @return 0 on success.
+ *
+ */
+int cvmx_helper_pko3_init_global(unsigned int node);
+int __cvmx_helper_pko3_init_global(unsigned int node, u16 gaura);
+
+/**
+ * Initialize a simple interface with a a given number of
+ * fair or prioritized queues.
+ * This function will assign one channel per sub-interface.
+ */
+int __cvmx_pko3_config_gen_interface(int xiface, u8 subif, u8 num_queues, bool prioritized);
+
+/*
+ * Configure and initialize PKO3 for an interface
+ *
+ * @param interface is the interface number to configure
+ * @return 0 on success.
+ *
+ */
+int cvmx_helper_pko3_init_interface(int xiface);
+int __cvmx_pko3_helper_dqs_activate(int xiface, int index, bool min_pad);
+
+/**
+ * Uninitialize PKO3 interface
+ *
+ * Release all resources held by PKO for an interface.
+ * The shutdown code is the same for all supported interfaces.
+ */
+int cvmx_helper_pko3_shut_interface(int xiface);
+
+/**
+ * Shutdown PKO3
+ *
+ * Should be called after all interfaces have been shut down on the PKO3.
+ *
+ * Disables the PKO, frees all its buffers.
+ */
+int cvmx_helper_pko3_shutdown(unsigned int node);
+
+/**
+ * Show integrated PKO configuration.
+ *
+ * @param node node number
+ */
+int cvmx_helper_pko3_config_dump(unsigned int node);
+
+/**
+ * Show integrated PKO statistics.
+ *
+ * @param node node number
+ */
+int cvmx_helper_pko3_stats_dump(unsigned int node);
+
+/**
+ * Clear PKO statistics.
+ *
+ * @param node node number
+ */
+void cvmx_helper_pko3_stats_clear(unsigned int node);
+
+#endif /* __CVMX_HELPER_PKO3_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h
new file mode 100644
index 0000000000..2a206a8827
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for RGMII/GMII/MII initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_RGMII_H__
+#define __CVMX_HELPER_RGMII_H__
+
+/**
+ * @INTERNAL
+ * Probe RGMII ports and determine the number present
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of RGMII/GMII/MII ports (0-4).
+ */
+int __cvmx_helper_rgmii_probe(int xiface);
+
+/**
+ * Put an RGMII interface in loopback mode. Internal packets sent
+ * out will be received back again on the same port. Externally
+ * received packets will echo back out.
+ *
+ * @param port IPD port number to loop.
+ */
+void cvmx_helper_rgmii_internal_loopback(int port);
+
+/**
+ * @INTERNAL
+ * Configure all of the ASX, GMX, and PKO regsiters required
+ * to get RGMII to function on the supplied interface.
+ *
+ * @param xiface PKO Interface to configure (0 or 1)
+ *
+ * @return Zero on success
+ */
+int __cvmx_helper_rgmii_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_gmii_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_rgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @param ipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, int enable_external);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h
new file mode 100644
index 0000000000..6fe55093b2
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h
@@ -0,0 +1,437 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions to abstract SFP and QSFP connectors
+ */
+
+#ifndef __CVMX_HELPER_SFP_H__
+#define __CVMX_HELPER_SFP_H__
+
+/**
+ * Maximum size for the SFP EEPROM. Currently only 96 bytes are used.
+ */
+#define CVMX_SFP_MAX_EEPROM_SIZE 0x100
+
+/**
+ * Default address of sfp EEPROM
+ */
+#define CVMX_SFP_DEFAULT_I2C_ADDR 0x50
+
+/**
+ * Default address of SFP diagnostics chip
+ */
+#define CVMX_SFP_DEFAULT_DIAG_I2C_ADDR 0x51
+
+struct cvmx_fdt_sfp_info;
+struct cvmx_fdt_gpio_info;
+/**
+ * Connector type for module, usually we only see SFP and QSFPP
+ */
+enum cvmx_phy_sfp_conn_type {
+ CVMX_SFP_CONN_GBIC = 0x01, /** GBIC */
+ CVMX_SFP_CONN_SFP = 0x03, /** SFP/SFP+/SFP28 */
+ CVMX_SFP_CONN_QSFP = 0x0C, /** 1G QSFP (obsolete) */
+ CVMX_SFP_CONN_QSFPP = 0x0D, /** QSFP+ or later */
+ CVMX_SFP_CONN_QSFP28 = 0x11, /** QSFP28 (100Gbps) */
+ CVMX_SFP_CONN_MICRO_QSFP = 0x17, /** Micro QSFP */
+ CVMX_SFP_CONN_QSFP_DD = 0x18, /** QSFP-DD Double Density 8X */
+ CVMX_SFP_CONN_SFP_DD = 0x1A, /** SFP-DD Double Density 2X */
+};
+
+/**
+ * module type plugged into a SFP/SFP+/QSFP+ port
+ */
+enum cvmx_phy_sfp_mod_type {
+ CVMX_SFP_MOD_UNKNOWN = 0, /** Unknown or unspecified */
+ /** Fiber optic module (LC connector) */
+ CVMX_SFP_MOD_OPTICAL_LC = 0x7,
+ /** Multiple optical */
+ CVMX_SFP_MOD_MULTIPLE_OPTICAL = 0x9,
+ /** Fiber optic module (pigtail, no connector) */
+ CVMX_SFP_MOD_OPTICAL_PIGTAIL = 0xB,
+ CVMX_SFP_MOD_COPPER_PIGTAIL = 0x21, /** copper module */
+ CVMX_SFP_MOD_RJ45 = 0x22, /** RJ45 (i.e. 10GBase-T) */
+ /** No separable connector (SFP28/copper) */
+ CVMX_SFP_MOD_NO_SEP_CONN = 0x23,
+ /** MXC 2X16 */
+ CVMX_SFP_MOD_MXC_2X16 = 0x24,
+ /** CS optical connector */
+ CVMX_SFP_MOD_CS_OPTICAL = 0x25,
+ /** Mini CS optical connector */
+ CVMX_SFP_MOD_MINI_CS_OPTICAL = 0x26,
+ /** Unknown/other module type */
+ CVMX_SFP_MOD_OTHER
+};
+
+/** Peak rate supported by SFP cable */
+enum cvmx_phy_sfp_rate {
+ CVMX_SFP_RATE_UNKNOWN, /** Unknown rate */
+ CVMX_SFP_RATE_1G, /** 1Gbps */
+ CVMX_SFP_RATE_10G, /** 10Gbps */
+ CVMX_SFP_RATE_25G, /** 25Gbps */
+ CVMX_SFP_RATE_40G, /** 40Gbps */
+ CVMX_SFP_RATE_100G /** 100Gbps */
+};
+
+/**
+ * Cable compliance specification
+ * See table 4-4 from SFF-8024 for the extended specification compliance codes
+ */
+enum cvmx_phy_sfp_cable_ext_compliance {
+ CVMX_SFP_CABLE_UNSPEC = 0,
+ CVMX_SFP_CABLE_100G_25GAUI_C2M_AOC_HIGH_BER = 0x01, /** Active optical cable */
+ CVMX_SFP_CABLE_100G_SR4_25G_SR = 0x2,
+ CVMX_SFP_CABLE_100G_LR4_25G_LR = 0x3,
+ CVMX_SFP_CABLE_100G_ER4_25G_ER = 0x4,
+ CVMX_SFP_CABLE_100G_SR10 = 0x5,
+ CVMX_SFP_CABLE_100G_CWDM4_MSA = 0x6,
+ CVMX_SFP_CABLE_100G_PSM4 = 0x7,
+ CVMX_SFP_CABLE_100G_25GAUI_C2M_ACC_HIGH_BER = 0x8,
+ CVMX_SFP_CABLE_100G_CWDM4 = 0x9,
+ CVMX_SFP_CABLE_100G_CR4_25G_CR_CA_L = 0xB,
+ CVMX_SFP_CABLE_25G_CR_CA_S = 0xC,
+ CVMX_SFP_CABLE_25G_CR_CA_N = 0xD,
+ CVMX_SFP_CABLE_40G_ER4 = 0x10,
+ CVMX_SFP_CABLE_4X10G_SR = 0x11,
+ CVMX_SFP_CABLE_40G_PSM4 = 0x12,
+ CVMX_SFP_CABLE_G959_1_P1I1_2D1 = 0x13,
+ CVMX_SFP_CABLE_G959_1_P1S1_2D2 = 0x14,
+ CVMX_SFP_CABLE_G959_1_P1L1_2D2 = 0x15,
+ CVMX_SFP_CABLE_10GBASE_T = 0x16,
+ CVMX_SFP_CABLE_100G_CLR4 = 0x17,
+ CVMX_SFP_CABLE_100G_25GAUI_C2M_AOC_LOW_BER = 0x18,
+ CVMX_SFP_CABLE_100G_25GAUI_C2M_ACC_LOW_BER = 0x19,
+ CVMX_SFP_CABLE_100G_2_LAMBDA_DWDM = 0x1a,
+ CVMX_SFP_CABLE_100G_1550NM_WDM = 0x1b,
+ CVMX_SFP_CABLE_10GBASE_T_SR = 0x1c,
+ CVMX_SFP_CABLE_5GBASE_T = 0x1d,
+ CVMX_SFP_CABLE_2_5GBASE_T = 0x1e,
+ CVMX_SFP_CABLE_40G_SWDM4 = 0x1f,
+ CVMX_SFP_CABLE_100G_SWDM4 = 0x20,
+ CVMX_SFP_CABLE_100G_PAM4_BIDI = 0x21,
+ CVMX_SFP_CABLE_100G_4WDM_10_FEC_HOST = 0x22,
+ CVMX_SFP_CABLE_100G_4WDM_20_FEC_HOST = 0x23,
+ CVMX_SFP_CABLE_100G_4WDM_40_FEC_HOST = 0x24,
+ CVMX_SFP_CABLE_100GBASE_DR_CAUI4_NO_FEC = 0x25,
+ CVMX_SFP_CABLE_100G_FR_CAUI4_NO_FEC = 0x26,
+ CVMX_SFP_CABLE_100G_LR_CAUI4_NO_FEC = 0x27,
+ CVMX_SFP_CABLE_ACTIVE_COPPER_50_100_200GAUI_LOW_BER = 0x30,
+ CVMX_SFP_CABLE_ACTIVE_OPTICAL_50_100_200GAUI_LOW_BER = 0x31,
+ CVMX_SFP_CABLE_ACTIVE_COPPER_50_100_200GAUI_HI_BER = 0x32,
+ CVMX_SFP_CABLE_ACTIVE_OPTICAL_50_100_200GAUI_HI_BER = 0x33,
+ CVMX_SFP_CABLE_50_100_200G_CR = 0x40,
+ CVMX_SFP_CABLE_50_100_200G_SR = 0x41,
+ CVMX_SFP_CABLE_50GBASE_FR_200GBASE_DR4 = 0x42,
+ CVMX_SFP_CABLE_200GBASE_FR4 = 0x43,
+ CVMX_SFP_CABLE_200G_1550NM_PSM4 = 0x44,
+ CVMX_SFP_CABLE_50GBASE_LR = 0x45,
+ CVMX_SFP_CABLE_200GBASE_LR4 = 0x46,
+ CVMX_SFP_CABLE_64GFC_EA = 0x50,
+ CVMX_SFP_CABLE_64GFC_SW = 0x51,
+ CVMX_SFP_CABLE_64GFC_LW = 0x52,
+ CVMX_SFP_CABLE_128GFC_EA = 0x53,
+ CVMX_SFP_CABLE_128GFC_SW = 0x54,
+ CVMX_SFP_CABLE_128GFC_LW = 0x55,
+
+};
+
+/** Optical modes module is compliant with */
+enum cvmx_phy_sfp_10g_eth_compliance {
+ CVMX_SFP_CABLE_10GBASE_ER = 0x80, /** 10G ER */
+ CVMX_SFP_CABLE_10GBASE_LRM = 0x40, /** 10G LRM */
+ CVMX_SFP_CABLE_10GBASE_LR = 0x20, /** 10G LR */
+ CVMX_SFP_CABLE_10GBASE_SR = 0x10 /** 10G SR */
+};
+
+/** Diagnostic ASIC compatibility */
+enum cvmx_phy_sfp_sff_8472_diag_rev {
+ CVMX_SFP_SFF_8472_NO_DIAG = 0x00,
+ CVMX_SFP_SFF_8472_REV_9_3 = 0x01,
+ CVMX_SFP_SFF_8472_REV_9_5 = 0x02,
+ CVMX_SFP_SFF_8472_REV_10_2 = 0x03,
+ CVMX_SFP_SFF_8472_REV_10_4 = 0x04,
+ CVMX_SFP_SFF_8472_REV_11_0 = 0x05,
+ CVMX_SFP_SFF_8472_REV_11_3 = 0x06,
+ CVMX_SFP_SFF_8472_REV_11_4 = 0x07,
+ CVMX_SFP_SFF_8472_REV_12_0 = 0x08,
+ CVMX_SFP_SFF_8472_REV_UNALLOCATED = 0xff
+};
+
+/**
+ * Data structure describing the current SFP or QSFP EEPROM
+ */
+struct cvmx_sfp_mod_info {
+ enum cvmx_phy_sfp_conn_type conn_type; /** Connector type */
+ enum cvmx_phy_sfp_mod_type mod_type; /** Module type */
+ enum cvmx_phy_sfp_rate rate; /** Rate of module */
+ /** 10G Ethernet Compliance codes (logical OR) */
+ enum cvmx_phy_sfp_10g_eth_compliance eth_comp;
+ /** Extended Cable compliance */
+ enum cvmx_phy_sfp_cable_ext_compliance cable_comp;
+ u8 vendor_name[17]; /** Module vendor name */
+ u8 vendor_oui[3]; /** vendor OUI */
+ u8 vendor_pn[17]; /** Vendor part number */
+ u8 vendor_rev[5]; /** Vendor revision */
+ u8 vendor_sn[17]; /** Vendor serial number */
+ u8 date_code[9]; /** Date code */
+ bool valid; /** True if module is valid */
+ bool active_cable; /** False for passive copper */
+ bool copper_cable; /** True if cable is copper */
+ /** True if module is limiting (i.e. not passive copper) */
+ bool limiting;
+ /** Maximum length of copper cable in meters */
+ int max_copper_cable_len;
+ /** Max single mode cable length in meters */
+ int max_single_mode_cable_length;
+ /** Max 50um OM2 cable length */
+ int max_50um_om2_cable_length;
+ /** Max 62.5um OM1 cable length */
+ int max_62_5um_om1_cable_length;
+ /** Max 50um OM4 cable length */
+ int max_50um_om4_cable_length;
+ /** Max 50um OM3 cable length */
+ int max_50um_om3_cable_length;
+ /** Minimum bitrate in Mbps */
+ int bitrate_min;
+ /** Maximum bitrate in Mbps */
+ int bitrate_max;
+ /**
+ * Set to true if forward error correction is required,
+ * for example, a 25GBase-CR CA-S cable.
+ *
+ * FEC should only be disabled at 25G with CA-N cables. FEC is required
+ * with 5M and longer cables.
+ */
+ bool fec_required;
+ /** True if RX output is linear */
+ bool linear_rx_output;
+ /** Power level, can be 1, 2 or 3 */
+ int power_level;
+ /** False if conventional cooling is used, true for active cooling */
+ bool cooled_laser;
+ /** True if internal retimer or clock and data recovery circuit */
+ bool internal_cdr;
+ /** True if LoS is implemented */
+ bool los_implemented;
+ /** True if LoS is inverted from the standard */
+ bool los_inverted;
+ /** True if TX_FAULT is implemented */
+ bool tx_fault_implemented;
+ /** True if TX_DISABLE is implemented */
+ bool tx_disable_implemented;
+ /** True if RATE_SELECT is implemented */
+ bool rate_select_implemented;
+ /** True if tuneable transmitter technology is used */
+ bool tuneable_transmitter;
+ /** True if receiver decision threshold is implemented */
+ bool rx_decision_threshold_implemented;
+ /** True if diagnostic monitoring present */
+ bool diag_monitoring;
+ /** True if diagnostic address 0x7f is used for selecting the page */
+ bool diag_paging;
+ /** Diagnostic feature revision */
+ enum cvmx_phy_sfp_sff_8472_diag_rev diag_rev;
+ /** True if an address change sequence is required for diagnostics */
+ bool diag_addr_change_required;
+ /** True if RX power is averaged, false if OMA */
+ bool diag_rx_power_averaged;
+ /** True if diagnostics are externally calibrated */
+ bool diag_externally_calibrated;
+ /** True if diagnostics are internally calibrated */
+ bool diag_internally_calibrated;
+ /** True of soft rate select control implemented per SFF-8431 */
+ bool diag_soft_rate_select_control;
+ /** True if application select control implemented per SFF-8079 */
+ bool diag_app_select_control;
+ /** True if soft RATE_SELECT control and moonitoring implemented */
+ bool diag_soft_rate_select_implemented;
+ /** True if soft RX_LOS monitoring implemented */
+ bool diag_soft_rx_los_implemented;
+ /** True if soft TX_FAULT monitoring implemented */
+ bool diag_soft_tx_fault_implemented;
+ /** True if soft TX_DISABLE control and monitoring implemented */
+ bool diag_soft_tx_disable_implemented;
+ /** True if alarm/warning flags implemented */
+ bool diag_alarm_warning_flags_implemented;
+};
+
+/**
+ * Reads the SFP EEPROM using the i2c bus
+ *
+ * @param[out] buffer Buffer to store SFP EEPROM data in
+ * The buffer should be SFP_MAX_EEPROM_SIZE bytes.
+ * @param i2c_bus i2c bus number to read from for SFP port
+ * @param i2c_addr i2c address to use, 0 for default
+ *
+ * @return -1 if invalid bus or i2c read error, 0 for success
+ */
+int cvmx_phy_sfp_read_i2c_eeprom(u8 *buffer, int i2c_bus, int i2c_addr);
+
+/**
+ * Reads the SFP/SFP+/QSFP EEPROM and outputs the type of module or cable
+ * plugged in
+ *
+ * @param[out] sfp_info Info about SFP module
+ * @param[in] buffer SFP EEPROM buffer to parse
+ *
+ * @return 0 on success, -1 if error reading EEPROM or if EEPROM corrupt
+ */
+int cvmx_phy_sfp_parse_eeprom(struct cvmx_sfp_mod_info *sfp_info, const u8 *buffer);
+
+/**
+ * Prints out information about a SFP/QSFP device
+ *
+ * @param[in] sfp_info data structure to print
+ */
+void cvmx_phy_sfp_print_info(const struct cvmx_sfp_mod_info *sfp_info);
+
+/**
+ * Reads and parses SFP/QSFP EEPROM
+ *
+ * @param sfp sfp handle to read
+ *
+ * @return 0 for success, -1 on error.
+ */
+int cvmx_sfp_read_i2c_eeprom(struct cvmx_fdt_sfp_info *sfp);
+
+/**
+ * Returns the information about a SFP/QSFP device
+ *
+ * @param sfp sfp handle
+ *
+ * @return sfp_info Pointer sfp mod info data structure
+ */
+const struct cvmx_sfp_mod_info *cvmx_phy_get_sfp_mod_info(const struct cvmx_fdt_sfp_info *sfp);
+
+/**
+ * Function called to check and return the status of the mod_abs pin or
+ * mod_pres pin for QSFPs.
+ *
+ * @param sfp Handle to SFP information.
+ * @param data User-defined data passed to the function
+ *
+ * @return 0 if absent, 1 if present, -1 on error
+ */
+int cvmx_sfp_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, void *data);
+
+/**
+ * Registers a function to be called to check mod_abs/mod_pres for a SFP/QSFP
+ * slot.
+ *
+ * @param sfp Handle to SFP data structure
+ * @param check_mod_abs Function to be called or NULL to remove
+ * @param mod_abs_data User-defined data to be passed to check_mod_abs
+ *
+ * @return 0 for success
+ */
+int cvmx_sfp_register_check_mod_abs(struct cvmx_fdt_sfp_info *sfp,
+ int (*check_mod_abs)(struct cvmx_fdt_sfp_info *sfp, void *data),
+ void *mod_abs_data);
+
+/**
+ * Registers a function to be called whenever the mod_abs/mod_pres signal
+ * changes.
+ *
+ * @param sfp Handle to SFP data structure
+ * @param mod_abs_changed Function called whenever mod_abs is changed
+ * or NULL to remove.
+ * @param mod_abs_changed_data User-defined data passed to
+ * mod_abs_changed
+ *
+ * @return 0 for success
+ */
+int cvmx_sfp_register_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp,
+ int (*mod_abs_changed)(struct cvmx_fdt_sfp_info *sfp, int val,
+ void *data),
+ void *mod_abs_changed_data);
+
+/**
+ * Function called to check and return the status of the tx_fault pin
+ *
+ * @param sfp Handle to SFP information.
+ * @param data User-defined data passed to the function
+ *
+ * @return 0 if signal present, 1 if signal absent, -1 on error
+ */
+int cvmx_sfp_check_tx_fault(struct cvmx_fdt_sfp_info *sfp, void *data);
+
+/**
+ * Function called to check and return the status of the rx_los pin
+ *
+ * @param sfp Handle to SFP information.
+ * @param data User-defined data passed to the function
+ *
+ * @return 0 if signal present, 1 if signal absent, -1 on error
+ */
+int cvmx_sfp_check_rx_los(struct cvmx_fdt_sfp_info *sfp, void *data);
+
+/**
+ * Registers a function to be called whenever rx_los changes
+ *
+ * @param sfp Handle to SFP data structure
+ * @param rx_los_changed Function to be called when rx_los changes
+ * or NULL to remove the function
+ * @param rx_los_changed_data User-defined data passed to
+ * rx_los_changed
+ *
+ * @return 0 for success
+ */
+int cvmx_sfp_register_rx_los_changed(struct cvmx_fdt_sfp_info *sfp,
+ int (*rx_los_changed)(struct cvmx_fdt_sfp_info *sfp, int val,
+ void *data),
+ void *rx_los_changed_data);
+
+/**
+ * Parses the device tree for SFP and QSFP slots
+ *
+ * @param fdt_addr Address of flat device-tree
+ *
+ * @return 0 for success, -1 on error
+ */
+int cvmx_sfp_parse_device_tree(const void *fdt_addr);
+
+/**
+ * Given an IPD port number find the corresponding SFP or QSFP slot
+ *
+ * @param ipd_port IPD port number to search for
+ *
+ * @return pointer to SFP data structure or NULL if not found
+ */
+struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_port(int ipd_port);
+
+/**
+ * Given a fdt node offset find the corresponding SFP or QSFP slot
+ *
+ * @param of_offset flat device tree node offset
+ *
+ * @return pointer to SFP data structure or NULL if not found
+ */
+struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_fdt_node(int of_offset);
+
+/**
+ * Reads the EEPROMs of all SFP modules.
+ *
+ * @return 0 for success
+ */
+int cvmx_sfp_read_all_modules(void);
+
+/**
+ * Validates if the module is correct for the specified port
+ *
+ * @param[in] sfp SFP port to check
+ * @param mode interface mode
+ *
+ * @return true if module is valid, false if invalid
+ * NOTE: This will also toggle the error LED, if present
+ */
+bool cvmx_sfp_validate_module(struct cvmx_fdt_sfp_info *sfp, int mode);
+
+/**
+ * Prints information about the SFP module
+ *
+ * @param[in] sfp sfp data structure
+ */
+void cvmx_sfp_print_info(const struct cvmx_fdt_sfp_info *sfp);
+
+#endif /* __CVMX_HELPER_SFP_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h
new file mode 100644
index 0000000000..c5110c9513
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for SGMII initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_SGMII_H__
+#define __CVMX_HELPER_SGMII_H__
+
+/**
+ * @INTERNAL
+ * Probe a SGMII interface and determine the number of ports
+ * connected to it. The SGMII interface should still be down after
+ * this call.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_sgmii_probe(int xiface);
+int __cvmx_helper_sgmii_enumerate(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a SGMII interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_sgmii_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_sgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @param ipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal, int enable_external);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h
new file mode 100644
index 0000000000..cae72f2172
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for SPI initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_SPI_H__
+#define __CVMX_HELPER_SPI_H__
+
+#include "cvmx-helper.h"
+
+/**
+ * @INTERNAL
+ * Probe a SPI interface and determine the number of ports
+ * connected to it. The SPI interface should still be down after
+ * this call.
+ *
+ * @param interface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_spi_probe(int interface);
+int __cvmx_helper_spi_enumerate(int interface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a SPI interface. After this call packet I/O
+ * should be fully functional. This is called with IPD enabled but
+ * PKO disabled.
+ *
+ * @param interface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_spi_enable(int interface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * Sets the spi timeout in config data
+ * @param timeout value
+ */
+void cvmx_spi_config_set_timeout(int timeout);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h
new file mode 100644
index 0000000000..2b7571dced
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for SRIO initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_SRIO_H__
+#define __CVMX_HELPER_SRIO_H__
+
+/**
+ * @INTERNAL
+ * Convert interface number to sRIO link number
+ * per SoC model.
+ *
+ * @param xiface Interface to convert
+ *
+ * @return Srio link number
+ */
+int __cvmx_helper_srio_port(int xiface);
+
+/**
+ * @INTERNAL
+ * Probe a SRIO interface and determine the number of ports
+ * connected to it. The SRIO interface should still be down after
+ * this call.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_srio_probe(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a SRIO interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_srio_enable(int xiface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by SRIO link status.
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_srio_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_srio_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h
new file mode 100644
index 0000000000..cf98eaeba4
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h
@@ -0,0 +1,412 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef __CVMX_HELPER_UTIL_H__
+#define __CVMX_HELPER_UTIL_H__
+
+#include "cvmx-mio-defs.h"
+#include "cvmx-helper.h"
+#include "cvmx-fpa.h"
+
+typedef char cvmx_pknd_t;
+typedef char cvmx_bpid_t;
+
+#define CVMX_INVALID_PKND ((cvmx_pknd_t)-1)
+#define CVMX_INVALID_BPID ((cvmx_bpid_t)-1)
+#define CVMX_MAX_PKND ((cvmx_pknd_t)64)
+#define CVMX_MAX_BPID ((cvmx_bpid_t)64)
+
+#define CVMX_HELPER_MAX_IFACE 11
+#define CVMX_HELPER_MAX_PORTS 16
+
+/* Maximum range for normalized (a.k.a. IPD) port numbers (12-bit field) */
+#define CVMX_PKO3_IPD_NUM_MAX 0x1000 //FIXME- take it from someplace else ?
+#define CVMX_PKO3_DQ_NUM_MAX 0x400 // 78xx has 1024 queues
+
+#define CVMX_PKO3_IPD_PORT_NULL (CVMX_PKO3_IPD_NUM_MAX - 1)
+#define CVMX_PKO3_IPD_PORT_LOOP 0
+
+struct cvmx_xport {
+ int node;
+ int port;
+};
+
+typedef struct cvmx_xport cvmx_xport_t;
+
+static inline struct cvmx_xport cvmx_helper_ipd_port_to_xport(int ipd_port)
+{
+ struct cvmx_xport r;
+
+ r.port = ipd_port & (CVMX_PKO3_IPD_NUM_MAX - 1);
+ r.node = (ipd_port >> 12) & CVMX_NODE_MASK;
+ return r;
+}
+
+static inline int cvmx_helper_node_to_ipd_port(int node, int index)
+{
+ return (node << 12) + index;
+}
+
+struct cvmx_xdq {
+ int node;
+ int queue;
+};
+
+typedef struct cvmx_xdq cvmx_xdq_t;
+
+static inline struct cvmx_xdq cvmx_helper_queue_to_xdq(int queue)
+{
+ struct cvmx_xdq r;
+
+ r.queue = queue & (CVMX_PKO3_DQ_NUM_MAX - 1);
+ r.node = (queue >> 10) & CVMX_NODE_MASK;
+ return r;
+}
+
+static inline int cvmx_helper_node_to_dq(int node, int queue)
+{
+ return (node << 10) + queue;
+}
+
+struct cvmx_xiface {
+ int node;
+ int interface;
+};
+
+typedef struct cvmx_xiface cvmx_xiface_t;
+
+/**
+ * Return node and interface number from XIFACE.
+ *
+ * @param xiface interface with node information
+ *
+ * @return struct that contains node and interface number.
+ */
+static inline struct cvmx_xiface cvmx_helper_xiface_to_node_interface(int xiface)
+{
+ cvmx_xiface_t interface_node;
+
+ /*
+ * If the majic number 0xde0000 is not present in the
+ * interface, then assume it is node 0.
+ */
+
+ if (((xiface >> 0x8) & 0xff) == 0xde) {
+ interface_node.node = (xiface >> 16) & CVMX_NODE_MASK;
+ interface_node.interface = xiface & 0xff;
+ } else {
+ interface_node.node = cvmx_get_node_num();
+ interface_node.interface = xiface & 0xff;
+ }
+ return interface_node;
+}
+
+/* Used internally only*/
+static inline bool __cvmx_helper_xiface_is_null(int xiface)
+{
+ return (xiface & 0xff) == 0xff;
+}
+
+#define __CVMX_XIFACE_NULL 0xff
+
+/**
+ * Return interface with majic number and node information (XIFACE)
+ *
+ * @param node node of the interface referred to
+ * @param interface interface to use.
+ *
+ * @return
+ */
+static inline int cvmx_helper_node_interface_to_xiface(int node, int interface)
+{
+ return ((node & CVMX_NODE_MASK) << 16) | (0xde << 8) | (interface & 0xff);
+}
+
+/**
+ * Free the pip packet buffers contained in a work queue entry.
+ * The work queue entry is not freed.
+ *
+ * @param work Work queue entry with packet to free
+ */
+static inline void cvmx_helper_free_pip_pkt_data(cvmx_wqe_t *work)
+{
+ u64 number_buffers;
+ cvmx_buf_ptr_t buffer_ptr;
+ cvmx_buf_ptr_t next_buffer_ptr;
+ u64 start_of_buffer;
+
+ number_buffers = work->word2.s.bufs;
+ if (number_buffers == 0)
+ return;
+
+ buffer_ptr = work->packet_ptr;
+
+ /* Since the number of buffers is not zero, we know this is not a dynamic
+ short packet. We need to check if it is a packet received with
+ IPD_CTL_STATUS[NO_WPTR]. If this is true, we need to free all buffers
+ except for the first one. The caller doesn't expect their WQE pointer
+ to be freed */
+ start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7;
+ if (cvmx_ptr_to_phys(work) == start_of_buffer) {
+ next_buffer_ptr = *(cvmx_buf_ptr_t *)cvmx_phys_to_ptr(buffer_ptr.s.addr - 8);
+ buffer_ptr = next_buffer_ptr;
+ number_buffers--;
+ }
+
+ while (number_buffers--) {
+ /* Remember the back pointer is in cache lines, not 64bit words */
+ start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7;
+ /* Read pointer to next buffer before we free the current buffer. */
+ next_buffer_ptr = *(cvmx_buf_ptr_t *)cvmx_phys_to_ptr(buffer_ptr.s.addr - 8);
+ cvmx_fpa_free(cvmx_phys_to_ptr(start_of_buffer), buffer_ptr.s.pool, 0);
+ buffer_ptr = next_buffer_ptr;
+ }
+}
+
+/**
+ * Free the pki packet buffers contained in a work queue entry.
+ * If first packet buffer contains wqe, wqe gets freed too so do not access
+ * wqe after calling this function.
+ * This function asssumes that buffers to be freed are from
+ * Naturally aligned pool/aura.
+ * It does not use don't write back.
+ * @param work Work queue entry with packet to free
+ */
+static inline void cvmx_helper_free_pki_pkt_data(cvmx_wqe_t *work)
+{
+ u64 number_buffers;
+ u64 start_of_buffer;
+ cvmx_buf_ptr_pki_t next_buffer_ptr;
+ cvmx_buf_ptr_pki_t buffer_ptr;
+ cvmx_wqe_78xx_t *wqe = (cvmx_wqe_78xx_t *)work;
+
+ if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
+ return;
+ }
+ /* Make sure errata pki-20776 has been applied*/
+ cvmx_wqe_pki_errata_20776(work);
+ buffer_ptr = wqe->packet_ptr;
+ number_buffers = cvmx_wqe_get_bufs(work);
+
+ while (number_buffers--) {
+ /* FIXME: change WQE function prototype */
+ unsigned int x = cvmx_wqe_get_aura(work);
+ cvmx_fpa3_gaura_t aura = __cvmx_fpa3_gaura(x >> 10, x & 0x3ff);
+ /* XXX- assumes the buffer is cache-line aligned and naturally aligned mode*/
+ start_of_buffer = (buffer_ptr.addr >> 7) << 7;
+ /* Read pointer to next buffer before we free the current buffer. */
+ next_buffer_ptr = *(cvmx_buf_ptr_pki_t *)cvmx_phys_to_ptr(buffer_ptr.addr - 8);
+ /* FPA AURA comes from WQE, includes node */
+ cvmx_fpa3_free(cvmx_phys_to_ptr(start_of_buffer), aura, 0);
+ buffer_ptr = next_buffer_ptr;
+ }
+}
+
+/**
+ * Free the pki wqe entry buffer.
+ * If wqe buffers contains first packet buffer, wqe does not get freed here.
+ * This function asssumes that buffers to be freed are from
+ * Naturally aligned pool/aura.
+ * It does not use don't write back.
+ * @param work Work queue entry to free
+ */
+static inline void cvmx_wqe_pki_free(cvmx_wqe_t *work)
+{
+ cvmx_wqe_78xx_t *wqe = (cvmx_wqe_78xx_t *)work;
+ unsigned int x;
+ cvmx_fpa3_gaura_t aura;
+
+ if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
+ return;
+ }
+ /* Do nothing if the first packet buffer shares WQE buffer */
+ if (!wqe->packet_ptr.packet_outside_wqe)
+ return;
+
+ /* FIXME change WQE function prototype */
+ x = cvmx_wqe_get_aura(work);
+ aura = __cvmx_fpa3_gaura(x >> 10, x & 0x3ff);
+
+ cvmx_fpa3_free(work, aura, 0);
+}
+
+/**
+ * Convert a interface mode into a human readable string
+ *
+ * @param mode Mode to convert
+ *
+ * @return String
+ */
+const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t mode);
+
+/**
+ * Debug routine to dump the packet structure to the console
+ *
+ * @param work Work queue entry containing the packet to dump
+ * @return
+ */
+int cvmx_helper_dump_packet(cvmx_wqe_t *work);
+
+/**
+ * Get the version of the CVMX libraries.
+ *
+ * @return Version string. Note this buffer is allocated statically
+ * and will be shared by all callers.
+ */
+const char *cvmx_helper_get_version(void);
+
+/**
+ * @INTERNAL
+ * Setup the common GMX settings that determine the number of
+ * ports. These setting apply to almost all configurations of all
+ * chips.
+ *
+ * @param xiface Interface to configure
+ * @param num_ports Number of ports on the interface
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_setup_gmx(int xiface, int num_ports);
+
+/**
+ * @INTERNAL
+ * Get the number of pko_ports on an interface.
+ *
+ * @param interface
+ *
+ * @return the number of pko_ports on the interface.
+ */
+int __cvmx_helper_get_num_pko_ports(int interface);
+
+/**
+ * Returns the IPD port number for a port on the given
+ * interface.
+ *
+ * @param interface Interface to use
+ * @param port Port on the interface
+ *
+ * @return IPD port number
+ */
+int cvmx_helper_get_ipd_port(int interface, int port);
+
+/**
+ * Returns the PKO port number for a port on the given interface,
+ * This is the base pko_port for o68 and ipd_port for older models.
+ *
+ * @param interface Interface to use
+ * @param port Port on the interface
+ *
+ * @return PKO port number and -1 on error.
+ */
+int cvmx_helper_get_pko_port(int interface, int port);
+
+/**
+ * Returns the IPD/PKO port number for the first port on the given
+ * interface.
+ *
+ * @param interface Interface to use
+ *
+ * @return IPD/PKO port number
+ */
+static inline int cvmx_helper_get_first_ipd_port(int interface)
+{
+ return cvmx_helper_get_ipd_port(interface, 0);
+}
+
+int cvmx_helper_ports_on_interface(int interface);
+
+/**
+ * Returns the IPD/PKO port number for the last port on the given
+ * interface.
+ *
+ * @param interface Interface to use
+ *
+ * @return IPD/PKO port number
+ *
+ * Note: for o68, the last ipd port on an interface does not always equal to
+ * the first plus the number of ports as the ipd ports are not contiguous in
+ * some cases, e.g., SGMII.
+ *
+ * Note: code that makes the assumption of contiguous ipd port numbers needs to
+ * be aware of this.
+ */
+static inline int cvmx_helper_get_last_ipd_port(int interface)
+{
+ return cvmx_helper_get_ipd_port(interface, cvmx_helper_ports_on_interface(interface) - 1);
+}
+
+/**
+ * Free the packet buffers contained in a work queue entry.
+ * The work queue entry is not freed.
+ * Note that this function will not free the work queue entry
+ * even if it contains a non-redundant data packet, and hence
+ * it is not really comparable to how the PKO would free a packet
+ * buffers if requested.
+ *
+ * @param work Work queue entry with packet to free
+ */
+void cvmx_helper_free_packet_data(cvmx_wqe_t *work);
+
+/**
+ * Returns the interface number for an IPD/PKO port number.
+ *
+ * @param ipd_port IPD/PKO port number
+ *
+ * @return Interface number
+ */
+int cvmx_helper_get_interface_num(int ipd_port);
+
+/**
+ * Returns the interface index number for an IPD/PKO port
+ * number.
+ *
+ * @param ipd_port IPD/PKO port number
+ *
+ * @return Interface index number
+ */
+int cvmx_helper_get_interface_index_num(int ipd_port);
+
+/**
+ * Get port kind for a given port in an interface.
+ *
+ * @param xiface Interface
+ * @param index index of the port in the interface
+ *
+ * @return port kind on sucicess and -1 on failure
+ */
+int cvmx_helper_get_pknd(int xiface, int index);
+
+/**
+ * Get bpid for a given port in an interface.
+ *
+ * @param interface Interface
+ * @param port index of the port in the interface
+ *
+ * @return port kind on sucicess and -1 on failure
+ */
+int cvmx_helper_get_bpid(int interface, int port);
+
+/**
+ * Internal functions.
+ */
+int __cvmx_helper_post_init_interfaces(void);
+int cvmx_helper_setup_red(int pass_thresh, int drop_thresh);
+void cvmx_helper_show_stats(int port);
+
+/*
+ * Return number of array alements
+ */
+#define NUM_ELEMENTS(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+/**
+ * Prints out a buffer with the address, hex bytes, and ASCII
+ *
+ * @param addr Start address to print on the left
+ * @param[in] buffer array of bytes to print
+ * @param count Number of bytes to print
+ */
+void cvmx_print_buffer_u8(unsigned int addr, const u8 *buffer, size_t count);
+
+#endif /* __CVMX_HELPER_H__ */
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h
new file mode 100644
index 0000000000..6ff4576f23
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Functions for XAUI initialization, configuration,
+ * and monitoring.
+ */
+
+#ifndef __CVMX_HELPER_XAUI_H__
+#define __CVMX_HELPER_XAUI_H__
+
+/**
+ * @INTERNAL
+ * Probe a XAUI interface and determine the number of ports
+ * connected to it. The XAUI interface should still be down
+ * after this call.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_xaui_probe(int xiface);
+int __cvmx_helper_xaui_enumerate(int xiface);
+
+/**
+ * @INTERNAL
+ * Bringup and enable a XAUI interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_xaui_enable(int xiface);
+
+/**
+ * Retrain XAUI interface.
+ *
+ * GMX is disabled as part of retraining.
+ * While GMX is disabled, new received packets are dropped.
+ * If GMX was in the middle of recieving a packet when disabled,
+ * that packet will be received before GMX idles.
+ * Transmitted packets are buffered normally, but not sent.
+ * If GMX was in the middle of transmitting a packet when disabled,
+ * that packet will be transmitted before GMX idles.
+ *
+ * @param interface Interface to retrain
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_helper_xaui_link_retrain(int interface);
+
+/**
+ * Reinitialize XAUI interface. Does a probe without changing the hardware
+ * state.
+ *
+ * @param interface Interface to reinitialize
+ *
+ * @return 0 on success, negative on failure
+ */
+int cvmx_helper_xaui_link_reinit(int interface);
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port);
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @param ipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_xaui_configure_loopback(int ipd_port, int enable_internal, int enable_external);
+
+#endif
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper.h b/arch/mips/mach-octeon/include/mach/cvmx-helper.h
new file mode 100644
index 0000000000..b82e201269
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper.h
@@ -0,0 +1,565 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Helper functions for common, but complicated tasks.
+ */
+
+#ifndef __CVMX_HELPER_H__
+#define __CVMX_HELPER_H__
+
+#include "cvmx-wqe.h"
+
+/* Max number of GMXX */
+#define CVMX_HELPER_MAX_GMX \
+ (OCTEON_IS_MODEL(OCTEON_CN78XX) ? \
+ 6 : \
+ (OCTEON_IS_MODEL(OCTEON_CN68XX) ? \
+ 5 : \
+ (OCTEON_IS_MODEL(OCTEON_CN73XX) ? \
+ 3 : \
+ (OCTEON_IS_MODEL(OCTEON_CNF75XX) ? 1 : 2))))
+
+#define CVMX_HELPER_CSR_INIT0 \
+ 0 /* Do not change as
+ CVMX_HELPER_WRITE_CSR()
+ assumes it */
+#define CVMX_HELPER_CSR_INIT_READ -1
+
+/*
+ * CVMX_HELPER_WRITE_CSR--set a field in a CSR with a value.
+ *
+ * @param chcsr_init initial value of the csr (CVMX_HELPER_CSR_INIT_READ
+ * means to use the existing csr value as the
+ * initial value.)
+ * @param chcsr_csr the name of the csr
+ * @param chcsr_type the type of the csr (see the -defs.h)
+ * @param chcsr_chip the chip for the csr/field
+ * @param chcsr_fld the field in the csr
+ * @param chcsr_val the value for field
+ */
+#define CVMX_HELPER_WRITE_CSR(chcsr_init, chcsr_csr, chcsr_type, chcsr_chip, chcsr_fld, chcsr_val) \
+ do { \
+ chcsr_type csr; \
+ if ((chcsr_init) == CVMX_HELPER_CSR_INIT_READ) \
+ csr.u64 = cvmx_read_csr(chcsr_csr); \
+ else \
+ csr.u64 = (chcsr_init); \
+ csr.chcsr_chip.chcsr_fld = (chcsr_val); \
+ cvmx_write_csr((chcsr_csr), csr.u64); \
+ } while (0)
+
+/*
+ * CVMX_HELPER_WRITE_CSR0--set a field in a CSR with the initial value of 0
+ */
+#define CVMX_HELPER_WRITE_CSR0(chcsr_csr, chcsr_type, chcsr_chip, chcsr_fld, chcsr_val) \
+ CVMX_HELPER_WRITE_CSR(CVMX_HELPER_CSR_INIT0, chcsr_csr, chcsr_type, chcsr_chip, chcsr_fld, \
+ chcsr_val)
+
+/*
+ * CVMX_HELPER_WRITE_CSR1--set a field in a CSR with the initial value of
+ * the CSR's current value.
+ */
+#define CVMX_HELPER_WRITE_CSR1(chcsr_csr, chcsr_type, chcsr_chip, chcsr_fld, chcsr_val) \
+ CVMX_HELPER_WRITE_CSR(CVMX_HELPER_CSR_INIT_READ, chcsr_csr, chcsr_type, chcsr_chip, \
+ chcsr_fld, chcsr_val)
+
+/* These flags are passed to __cvmx_helper_packet_hardware_enable */
+
+typedef enum {
+ CVMX_HELPER_INTERFACE_MODE_DISABLED,
+ CVMX_HELPER_INTERFACE_MODE_RGMII,
+ CVMX_HELPER_INTERFACE_MODE_GMII,
+ CVMX_HELPER_INTERFACE_MODE_SPI,
+ CVMX_HELPER_INTERFACE_MODE_PCIE,
+ CVMX_HELPER_INTERFACE_MODE_XAUI,
+ CVMX_HELPER_INTERFACE_MODE_SGMII,
+ CVMX_HELPER_INTERFACE_MODE_PICMG,
+ CVMX_HELPER_INTERFACE_MODE_NPI,
+ CVMX_HELPER_INTERFACE_MODE_LOOP,
+ CVMX_HELPER_INTERFACE_MODE_SRIO,
+ CVMX_HELPER_INTERFACE_MODE_ILK,
+ CVMX_HELPER_INTERFACE_MODE_RXAUI,
+ CVMX_HELPER_INTERFACE_MODE_QSGMII,
+ CVMX_HELPER_INTERFACE_MODE_AGL,
+ CVMX_HELPER_INTERFACE_MODE_XLAUI,
+ CVMX_HELPER_INTERFACE_MODE_XFI,
+ CVMX_HELPER_INTERFACE_MODE_10G_KR,
+ CVMX_HELPER_INTERFACE_MODE_40G_KR4,
+ CVMX_HELPER_INTERFACE_MODE_MIXED,
+} cvmx_helper_interface_mode_t;
+
+typedef union cvmx_helper_link_info {
+ u64 u64;
+ struct {
+ u64 reserved_20_63 : 43;
+ u64 init_success : 1;
+ u64 link_up : 1;
+ u64 full_duplex : 1;
+ u64 speed : 18;
+ } s;
+} cvmx_helper_link_info_t;
+
+/**
+ * Sets the back pressure configuration in internal data structure.
+ * @param backpressure_dis disable/enable backpressure
+ */
+void cvmx_rgmii_set_back_pressure(u64 backpressure_dis);
+
+#include "cvmx-helper-fpa.h"
+
+#include "cvmx-helper-agl.h"
+#include "cvmx-helper-errata.h"
+#include "cvmx-helper-ilk.h"
+#include "cvmx-helper-loop.h"
+#include "cvmx-helper-npi.h"
+#include "cvmx-helper-rgmii.h"
+#include "cvmx-helper-sgmii.h"
+#include "cvmx-helper-spi.h"
+#include "cvmx-helper-srio.h"
+#include "cvmx-helper-util.h"
+#include "cvmx-helper-xaui.h"
+
+#include "cvmx-fpa3.h"
+
+enum cvmx_pko_padding {
+ CVMX_PKO_PADDING_NONE = 0,
+ CVMX_PKO_PADDING_60 = 1,
+};
+
+/**
+ * This function enables the IPD and also enables the packet interfaces.
+ * The packet interfaces (RGMII and SPI) must be enabled after the
+ * IPD. This should be called by the user program after any additional
+ * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD
+ * is not set in the executive-config.h file.
+ *
+ * @return 0 on success
+ * -1 on failure
+ */
+int cvmx_helper_ipd_and_packet_input_enable_node(int node);
+int cvmx_helper_ipd_and_packet_input_enable(void);
+
+/**
+ * Initialize and allocate memory for the SSO.
+ *
+ * @param wqe_entries The maximum number of work queue entries to be
+ * supported.
+ *
+ * @return Zero on success, non-zero on failure.
+ */
+int cvmx_helper_initialize_sso(int wqe_entries);
+
+/**
+ * Initialize and allocate memory for the SSO on a specific node.
+ *
+ * @param node Node SSO to initialize
+ * @param wqe_entries The maximum number of work queue entries to be
+ * supported.
+ *
+ * @return Zero on success, non-zero on failure.
+ */
+int cvmx_helper_initialize_sso_node(unsigned int node, int wqe_entries);
+
+/**
+ * Undo the effect of cvmx_helper_initialize_sso().
+ *
+ * @return Zero on success, non-zero on failure.
+ */
+int cvmx_helper_uninitialize_sso(void);
+
+/**
+ * Undo the effect of cvmx_helper_initialize_sso_node().
+ *
+ * @param node Node SSO to initialize
+ *
+ * @return Zero on success, non-zero on failure.
+ */
+int cvmx_helper_uninitialize_sso_node(unsigned int node);
+
+/**
+ * Initialize the PIP, IPD, and PKO hardware to support
+ * simple priority based queues for the ethernet ports. Each
+ * port is configured with a number of priority queues based
+ * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
+ * priority than the previous.
+ *
+ * @return Zero on success, non-zero on failure
+ */
+int cvmx_helper_initialize_packet_io_global(void);
+/**
+ * Initialize the PIP, IPD, and PKO hardware to support
+ * simple priority based queues for the ethernet ports. Each
+ * port is configured with a number of priority queues based
+ * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
+ * priority than the previous.
+ *
+ * @param node Node on which to initialize packet io hardware
+ *
+ * @return Zero on success, non-zero on failure
+ */
+int cvmx_helper_initialize_packet_io_node(unsigned int node);
+
+/**
+ * Does core local initialization for packet io
+ *
+ * @return Zero on success, non-zero on failure
+ */
+int cvmx_helper_initialize_packet_io_local(void);
+
+/**
+ * Undo the initialization performed in
+ * cvmx_helper_initialize_packet_io_global(). After calling this routine and the
+ * local version on each core, packet IO for Octeon will be disabled and placed
+ * in the initial reset state. It will then be safe to call the initialize
+ * later on. Note that this routine does not empty the FPA pools. It frees all
+ * buffers used by the packet IO hardware to the FPA so a function emptying the
+ * FPA after shutdown should find all packet buffers in the FPA.
+ *
+ * @return Zero on success, negative on failure.
+ */
+int cvmx_helper_shutdown_packet_io_global(void);
+
+/**
+ * Helper function for 78xx global packet IO shutdown
+ */
+int cvmx_helper_shutdown_packet_io_global_cn78xx(int node);
+
+/**
+ * Does core local shutdown of packet io
+ *
+ * @return Zero on success, non-zero on failure
+ */
+int cvmx_helper_shutdown_packet_io_local(void);
+
+/**
+ * Returns the number of ports on the given interface.
+ * The interface must be initialized before the port count
+ * can be returned.
+ *
+ * @param interface Which interface to return port count for.
+ *
+ * @return Port count for interface
+ * -1 for uninitialized interface
+ */
+int cvmx_helper_ports_on_interface(int interface);
+
+/**
+ * Return the number of interfaces the chip has. Each interface
+ * may have multiple ports. Most chips support two interfaces,
+ * but the CNX0XX and CNX1XX are exceptions. These only support
+ * one interface.
+ *
+ * @return Number of interfaces on chip
+ */
+int cvmx_helper_get_number_of_interfaces(void);
+
+/**
+ * Get the operating mode of an interface. Depending on the Octeon
+ * chip and configuration, this function returns an enumeration
+ * of the type of packet I/O supported by an interface.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Mode of the interface. Unknown or unsupported interfaces return
+ * DISABLED.
+ */
+cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int xiface);
+
+/**
+ * Auto configure an IPD/PKO port link state and speed. This
+ * function basically does the equivalent of:
+ * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
+ *
+ * @param ipd_port IPD/PKO port to auto configure
+ *
+ * @return Link state after configure
+ */
+cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port);
+
+/**
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set().
+ *
+ * @param ipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);
+
+/**
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead.
+ *
+ * @param ipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info);
+
+/**
+ * This function probes an interface to determine the actual number of
+ * hardware ports connected to it. It does some setup the ports but
+ * doesn't enable them. The main goal here is to set the global
+ * interface_port_count[interface] correctly. Final hardware setup of
+ * the ports will be performed later.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_helper_interface_probe(int xiface);
+
+/**
+ * Determine the actual number of hardware ports connected to an
+ * interface. It doesn't setup the ports or enable them.
+ *
+ * @param xiface Interface to enumerate
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_helper_interface_enumerate(int xiface);
+
+/**
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again.
+ *
+ * @param ipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int cvmx_helper_configure_loopback(int ipd_port, int enable_internal, int enable_external);
+
+/**
+ * Returns the number of ports on the given interface.
+ *
+ * @param interface Which interface to return port count for.
+ *
+ * @return Port count for interface
+ * -1 for uninitialized interface
+ */
+int __cvmx_helper_early_ports_on_interface(int interface);
+
+void cvmx_helper_setup_simulator_io_buffer_counts(int node, int num_packet_buffers,
+ int pko_buffers);
+
+void cvmx_helper_set_wqe_no_ptr_mode(bool mode);
+void cvmx_helper_set_pkt_wqe_le_mode(bool mode);
+int cvmx_helper_shutdown_fpa_pools(int node);
+
+/**
+ * Convert Ethernet QoS/PCP value to system-level priority
+ *
+ * In OCTEON, highest priority is 0, in Ethernet 802.1p PCP field
+ * the highest priority is 7, lowest is 1. Here is the full conversion
+ * table between QoS (PCP) and OCTEON priority values, per IEEE 802.1Q-2005:
+ *
+ * PCP Priority Acronym Traffic Types
+ * 1 7 (lowest) BK Background
+ * 0 6 BE Best Effort
+ * 2 5 EE Excellent Effort
+ * 3 4 CA Critical Applications
+ * 4 3 VI Video, < 100 ms latency and jitter
+ * 5 2 VO Voice, < 10 ms latency and jitter
+ * 6 1 IC Internetwork Control
+ * 7 0 (highest) NC Network Control
+ */
+static inline u8 cvmx_helper_qos2prio(u8 qos)
+{
+ static const unsigned int pcp_map = 6 << (4 * 0) | 7 << (4 * 1) | 5 << (4 * 2) |
+ 4 << (4 * 3) | 3 << (4 * 4) | 2 << (4 * 5) |
+ 1 << (4 * 6) | 0 << (4 * 7);
+
+ return (pcp_map >> ((qos & 0x7) << 2)) & 0x7;
+}
+
+/**
+ * Convert system-level priority to Ethernet QoS/PCP value
+ *
+ * Calculate the reverse of cvmx_helper_qos2prio() per IEEE 802.1Q-2005.
+ */
+static inline u8 cvmx_helper_prio2qos(u8 prio)
+{
+ static const unsigned int prio_map = 7 << (4 * 0) | 6 << (4 * 1) | 5 << (4 * 2) |
+ 4 << (4 * 3) | 3 << (4 * 4) | 2 << (4 * 5) |
+ 0 << (4 * 6) | 1 << (4 * 7);
+
+ return (prio_map >> ((prio & 0x7) << 2)) & 0x7;
+}
+
+/**
+ * @INTERNAL
+ * Get the number of ipd_ports on an interface.
+ *
+ * @param xiface
+ *
+ * @return the number of ipd_ports on the interface and -1 for error.
+ */
+int __cvmx_helper_get_num_ipd_ports(int xiface);
+
+enum cvmx_pko_padding __cvmx_helper_get_pko_padding(int xiface);
+
+/**
+ * @INTERNAL
+ *
+ * @param xiface
+ * @param num_ipd_ports is the number of ipd_ports on the interface
+ * @param has_fcs indicates if PKO does FCS for the ports on this
+ * @param pad The padding that PKO should apply.
+ * interface.
+ *
+ * @return 0 for success and -1 for failure
+ */
+int __cvmx_helper_init_interface(int xiface, int num_ipd_ports, int has_fcs,
+ enum cvmx_pko_padding pad);
+
+void __cvmx_helper_shutdown_interfaces(void);
+
+/*
+ * @INTERNAL
+ * Enable packet input/output from the hardware. This function is
+ * called after all internal setup is complete and IPD is enabled.
+ * After this function completes, packets will be accepted from the
+ * hardware ports. PKO should still be disabled to make sure packets
+ * aren't sent out partially setup hardware.
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_packet_hardware_enable(int xiface);
+
+/*
+ * @INTERNAL
+ *
+ * @return 0 for success and -1 for failure
+ */
+int __cvmx_helper_set_link_info(int xiface, int index, cvmx_helper_link_info_t link_info);
+
+/**
+ * @INTERNAL
+ *
+ * @param xiface
+ * @param port
+ *
+ * @return valid link_info on success or -1 on failure
+ */
+cvmx_helper_link_info_t __cvmx_helper_get_link_info(int xiface, int port);
+
+/**
+ * @INTERNAL
+ *
+ * @param xiface
+ *
+ * @return 0 if PKO does not do FCS and 1 otherwise.
+ */
+int __cvmx_helper_get_has_fcs(int xiface);
+
+void *cvmx_helper_mem_alloc(int node, u64 alloc_size, u64 align);
+void cvmx_helper_mem_free(void *buffer, u64 size);
+
+#define CVMX_QOS_NUM 8 /* Number of QoS priority classes */
+
+typedef enum {
+ CVMX_QOS_PROTO_NONE, /* Disable QOS */
+ CVMX_QOS_PROTO_PAUSE, /* IEEE 802.3 PAUSE */
+ CVMX_QOS_PROTO_PFC /* IEEE 802.1Qbb-2011 PFC/CBFC */
+} cvmx_qos_proto_t;
+
+typedef enum {
+ CVMX_QOS_PKT_MODE_HWONLY, /* PAUSE packets processed in Hardware only. */
+ CVMX_QOS_PKT_MODE_SWONLY, /* PAUSE packets processed in Software only. */
+ CVMX_QOS_PKT_MODE_HWSW, /* PAUSE packets processed in both HW and SW. */
+ CVMX_QOS_PKT_MODE_DROP /* Ignore PAUSE packets. */
+} cvmx_qos_pkt_mode_t;
+
+typedef enum {
+ CVMX_QOS_POOL_PER_PORT, /* Pool per Physical Port */
+ CVMX_QOS_POOL_PER_CLASS /* Pool per Priority Class */
+} cvmx_qos_pool_mode_t;
+
+typedef struct cvmx_qos_config {
+ cvmx_qos_proto_t qos_proto; /* QoS protocol.*/
+ cvmx_qos_pkt_mode_t pkt_mode; /* PAUSE processing mode.*/
+ cvmx_qos_pool_mode_t pool_mode; /* FPA Pool mode.*/
+ int pktbuf_size; /* Packet buffer size */
+ int aura_size; /* Number of buffers */
+ int drop_thresh[CVMX_QOS_NUM]; /* DROP threashold in % */
+ int red_thresh[CVMX_QOS_NUM]; /* RED threashold in % */
+ int bp_thresh[CVMX_QOS_NUM]; /* BP threashold in % */
+ int groups[CVMX_QOS_NUM]; /* Base SSO group for QOS group set. */
+ int group_prio[CVMX_QOS_NUM]; /* SSO group priorities.*/
+ int pko_pfc_en; /* Enable PKO PFC layout. */
+ int vlan_num; /* VLAN number: 0 = 1st or 1 = 2nd. */
+ int p_time; /* PAUSE packets send time (in number of 512 bit-times).*/
+ int p_interval; /* PAUSE packet send interval (in number of 512 bit-times).*/
+ /* Internal parameters (should not be used by application developer): */
+ cvmx_fpa3_pool_t gpools[CVMX_QOS_NUM]; /* Pool to use.*/
+ cvmx_fpa3_gaura_t gauras[CVMX_QOS_NUM]; /* Global auras -- one per priority class. */
+ int bpids[CVMX_QOS_NUM]; /* PKI BPID.*/
+ int qpg_base; /* QPG Table base index.*/
+} cvmx_qos_config_t;
+
+/**
+ * Initialize QoS configuraiton with the SDK defaults.
+ *
+ * @param qos_cfg User QOS configuration parameters.
+ * @return Zero on success, negative number otherwise.
+ */
+int cvmx_helper_qos_config_init(cvmx_qos_proto_t qos_proto, cvmx_qos_config_t *qos_cfg);
+
+/**
+ * Update the user static processor configuration.
+ * It should be done before any initialization of the DP units is performed.
+ *
+ * @param xipdport Global IPD port
+ * @param qos_cfg User QOS configuration parameters.
+ * @return Zero on success, negative number otherwise.
+ */
+int cvmx_helper_qos_port_config_update(int xipdport, cvmx_qos_config_t *qos_cfg);
+
+/**
+ * Configure the Data Path components for QOS function.
+ * This function is called after the global processor initialization is
+ * performed.
+ *
+ * @param xipdport Global IPD port
+ * @param qos_cfg User QOS configuration parameters.
+ * @return Zero on success, negative number otherwise.
+ */
+int cvmx_helper_qos_port_setup(int xipdport, cvmx_qos_config_t *qos_cfg);
+
+/**
+ * Configure the SSO for QOS function.
+ * This function is called after the global processor initialization is
+ * performed.
+ *
+ * @param node OCTEON3 node number.
+ * @param qos_cfg User QOS configuration parameters.
+ * @return Zero on success, negative number otherwise.
+ */
+int cvmx_helper_qos_sso_setup(int node, cvmx_qos_config_t *qos_cfg);
+
+/**
+ * Return PKI_CHAN_E channel name based on the provided index.
+ * @param chan Channel index.
+ * @param namebuf Name buffer (output).
+ * @param buflen Name maximum length.
+ * @return Length of name (in bytes) on success, negative number otherwise.
+ */
+int cvmx_helper_get_chan_e_name(int chan, char *namebuf, int buflen);
+
+#ifdef CVMX_DUMP_DIAGNOSTICS
+void cvmx_helper_dump_for_diagnostics(int node);
+#endif
+
+#endif /* __CVMX_HELPER_H__ */
--
2.29.2