[PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro

Christian Hewitt
2020-12-18T08:45:45Z

Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++
doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++
doc/board/amlogic/index.rst | 4 +-
3 files changed, 234 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/beelink-gtking.rst
create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst

diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst
new file mode 100644
index 0000000000..56ce2cb273
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtking.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King
+==========================
+
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- S/PDIF optical output
+- Analogue audio output
+- 1x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x micro SD card slot
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtking_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst
new file mode 100644
index 0000000000..d750351361
--- /dev/null
+++ b/doc/board/amlogic/beelink-gtkingpro.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GT-King Pro
+==============================
+
+The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
+board with an S922X-H chip.
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- Analogue audio output
+- 1x RS232 port
+- 2x USB 2.0 port
+- 2x USB 3.0 ports
+- IR receiver
+- 1x SD card slot
+- 1x Power on/off button
+
+Beelink do not provide public schematics, but have been willing
+to share them with known distro developers on request.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gtkingpro_defconfig
+ $ make
+
+Image creation
+--------------
+
+Amlogic does not provide sources for the firmware and for tools needed
+to create the bootloader image. Beelink have provided the Amlogic "SDK"
+in their forums, but the u-boot sources included result in 2GB RAM being
+detected. The following FIPs were generated with newer private sources
+and give correct (4GB) RAM detection:
+
+https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+NB: Beelink use a common board config for GT-King, GT-King Pro and the
+GS-King-X model, hence the "beelink-s922x" name.
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/your_sd_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index a585d857df..275c3664b7 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
+===============================+===========+=================+==============+============+============+=============+==============+
| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
-| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 |
+| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
| | P201 | LibreTech-AC v2 | | | | | |
+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -77,6 +77,8 @@ Board Documentation
.. toctree::
:maxdepth: 1

+ beelink-gtking
+ beelink-gtkingpro
khadas-vim2
khadas-vim3l
khadas-vim3
--
2.17.1