[PATCH 2/2] arm: dart6ul: read and print SoM info from eeprom on startup

[sbabic at denx.de <sbabic@denx.de>]

> From: Marc Ferland <ferlandm@amotus.ca>
> The dart6ul has an i2c eeprom at 0x50 which contains, among other
> things, the manufacturing/revision/options info of the SoM. This patch
> replaces the current checkboard() implementation with a more
> exhaustive one based on the content of the eeprom.
> Since this code uses the new driver model, some changes were also
> required in the DTS to make the nodes related to i2c available before
> relocation.
> This code was inspired from the supported u-boot code from Variscite
> which can be found here:
> https://github.com/varigit/uboot-imx/tree/imx_v2018.03_4.14.78_1.0.0_ga_var02
> New output example:
> Board: PN: VSM-6UL-705B, Assy: AS1812142257, Date: 2019 Feb 17
>        Storage: eMMC, Wifi: yes, DDR: 1024 MiB, Rev: 2.4G
> Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================