public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 0/5] Enable ECDSA FIT verification for stm32mp
Date: Mon, 11 Jan 2021 09:41:32 -0600	[thread overview]
Message-ID: <20210111154137.621732-1-mr.nuke.me@gmail.com> (raw)

This series is Part II of the ECDSA saga. It applies on top of [1]:
 * [PATCH v4 0/6] Add support for ECDSA image signing (with test)

I've designed the UCLASS_ECDSA such that it aligns with the ROM API
of the stm32mp. Instead of splitting the verification into
(1) curve operations and (2) modular exponentiation, I've
concatenated everything in a 'verify' step. It would be impossible to
split the steps and use the stm32mp ROM for verification.

Should more granular control be required, this API could be extended
at a later time. Until we have more hardware supporting ECDSA, this
is purely speculative.

The ROM API of the stm32mp is passed in 'r0' when the FSBL is called.
While we can save 'r0' in SPL, this series does not implement a
mechanism to pass this to u-boot. Thus the ROM API, and ECDSA
verification are only available for SPL. Although extending this to
u-boot by adding the ROM address to the FDT blob, implementing and
verifying this is beyond the scope of this series.

[1] https://lists.denx.de/pipermail/u-boot/2021-January/436935.html

Alexandru Gagniuc (5):
  dm: crypto: Define UCLASS API for ECDSA signature verification
  lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot
  lib: ecdsa: Implement signature verification for crypto_algo API
  arm: stm32mp1: Implement ECDSA signature verification
  Kconfig: FIT_SIGNATURE should not select RSA_VERIFY

 arch/arm/mach-stm32mp/Kconfig        |   9 ++
 arch/arm/mach-stm32mp/Makefile       |   1 +
 arch/arm/mach-stm32mp/ecdsa_romapi.c | 106 ++++++++++++++++++++++
 common/Kconfig.boot                  |   8 +-
 include/crypto/ecdsa-uclass.h        |  39 ++++++++
 include/dm/uclass-id.h               |   1 +
 include/image.h                      |  10 +--
 include/u-boot/rsa.h                 |   2 +-
 lib/Kconfig                          |   1 +
 lib/Makefile                         |   1 +
 lib/ecdsa/Kconfig                    |  23 +++++
 lib/ecdsa/Makefile                   |   1 +
 lib/ecdsa/ecdsa-verify.c             | 128 +++++++++++++++++++++++++++
 13 files changed, 320 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-stm32mp/ecdsa_romapi.c
 create mode 100644 include/crypto/ecdsa-uclass.h
 create mode 100644 lib/ecdsa/Kconfig
 create mode 100644 lib/ecdsa/Makefile
 create mode 100644 lib/ecdsa/ecdsa-verify.c

-- 
2.26.2

             reply	other threads:[~2021-01-11 15:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11 15:41 Alexandru Gagniuc [this message]
2021-01-11 15:41 ` [PATCH 1/5] dm: crypto: Define UCLASS API for ECDSA signature verification Alexandru Gagniuc
2021-01-13 16:10   ` Simon Glass
2021-01-14 16:09     ` Alex G.
2021-01-14 19:16       ` Simon Glass
2021-01-11 15:41 ` [PATCH 2/5] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot Alexandru Gagniuc
2021-02-09 15:11   ` Patrick DELAUNAY
2021-02-09 22:37     ` Alex G.
2021-01-11 15:41 ` [PATCH 3/5] lib: ecdsa: Implement signature verification for crypto_algo API Alexandru Gagniuc
2021-01-13 16:10   ` Simon Glass
2021-02-09 15:56   ` Patrick DELAUNAY
2021-02-09 22:58     ` Alex G.
2021-01-11 15:41 ` [PATCH 4/5] arm: stm32mp1: Implement ECDSA signature verification Alexandru Gagniuc
2021-01-11 15:41 ` [PATCH 5/5] Kconfig: FIT_SIGNATURE should not select RSA_VERIFY Alexandru Gagniuc
2021-01-13 16:10   ` Simon Glass
2021-02-09 15:08 ` [PATCH 0/5] Enable ECDSA FIT verification for stm32mp Patrick DELAUNAY
2021-02-09 21:28   ` Alex G.
  -- strict thread matches above, loose matches on Subject: below --
2021-07-27  8:09 [PATCH v5 5/5] test: dm: Add test for ECDSA UCLASS support Patrick DELAUNAY
2021-07-29 16:47 ` [PATCH 0/5] Enable ECDSA FIT verification for stm32mp Alexandru Gagniuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111154137.621732-1-mr.nuke.me@gmail.com \
    --to=mr.nuke.me@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox