[RESEND 6/7] Revert "fastboot: Add default fastboot_set_reboot_flag implementation"

[Lukasz Majewski <lukma@denx.de>]

Hi Roman,

> This reverts commit 0ebf9842e56c5b8cb7cb1f990bb452cc14af6225.
> 
> Current generic implementation of fastboot_set_reboot_flag is somewhat
> messy and requires some additional configuration option to be enabled
> besides CMD_BCB, so it reverts that implementtion in order to bring a
> new cleaner one.
> 
> Next commit introduces new generic implementation of
> fastboot_set_reboot_flag.
> 
> Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
> ---
>  drivers/fastboot/Kconfig       | 12 ----------
>  drivers/fastboot/Makefile      |  1 -
>  drivers/fastboot/fb_bcb_impl.c | 43
> ---------------------------------- include/fastboot.h             |
> 9 ------- 4 files changed, 65 deletions(-)
>  delete mode 100644 drivers/fastboot/fb_bcb_impl.c
> 
> diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
> index 4352ba67a713..d4436dfc9173 100644
> --- a/drivers/fastboot/Kconfig
> +++ b/drivers/fastboot/Kconfig
> @@ -165,18 +165,6 @@ config FASTBOOT_CMD_OEM_FORMAT
>  	  relies on the env variable partitions to contain the list
> of partitions as required by the gpt command.
>  
> -config FASTBOOT_USE_BCB_SET_REBOOT_FLAG
> -	bool "Use BCB by fastboot to set boot reason"
> -	depends on CMD_BCB && !ARCH_MESON && !ARCH_ROCKCHIP &&
> !TARGET_KC1 && \
> -	  !TARGET_SNIPER && !TARGET_AM57XX_EVM && !TARGET_DRA7XX_EVM
> -	default y
> -	help
> -	  Fastboot could implement setting of reboot reason in a
> generic fashion
> -	  via BCB commands. BCB commands are able to write reboot
> reason into
> -	  command field of boot control block. In general case it is
> sufficient
> -	  implementation if your platform supports BCB commands and
> doesn't
> -	  require any specific reboot reason handling.
> -
>  endif # FASTBOOT
>  
>  endmenu
> diff --git a/drivers/fastboot/Makefile b/drivers/fastboot/Makefile
> index 2b2c390fe4de..048af5aa8234 100644
> --- a/drivers/fastboot/Makefile
> +++ b/drivers/fastboot/Makefile
> @@ -5,4 +5,3 @@ obj-y += fb_getvar.o
>  obj-y += fb_command.o
>  obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fb_mmc.o
>  obj-$(CONFIG_FASTBOOT_FLASH_NAND) += fb_nand.o
> -obj-$(CONFIG_FASTBOOT_USE_BCB_SET_REBOOT_FLAG) += fb_bcb_impl.o
> diff --git a/drivers/fastboot/fb_bcb_impl.c
> b/drivers/fastboot/fb_bcb_impl.c deleted file mode 100644
> index 89ec3601b6f6..000000000000
> --- a/drivers/fastboot/fb_bcb_impl.c
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright 2020 GlobalLogic.
> - * Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
> - */
> -
> -#include <common.h>
> -#include <fastboot.h>
> -
> -/**
> - * fastboot_set_reboot_flag() - Set flag to indicate
> reboot-bootloader
> - *
> - * Set flag which indicates that we should reboot into the bootloader
> - * following the reboot that fastboot executes after this function.
> - *
> - * This function should be overridden in your board file with one
> - * which sets whatever flag your board specific Android bootloader
> flow
> - * requires in order to re-enter the bootloader.
> - */
> -int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
> -{
> -	char cmd[64];
> -
> -	if (reason >= FASTBOOT_REBOOT_REASONS_COUNT)
> -		return -EINVAL;
> -
> -	snprintf(cmd, sizeof(cmd), "bcb load %d misc",
> -		 CONFIG_FASTBOOT_FLASH_MMC_DEV);
> -
> -	if (run_command(cmd, 0))
> -		return -ENODEV;
> -
> -	snprintf(cmd, sizeof(cmd), "bcb set command %s",
> -		 fastboot_boot_cmds[reason]);
> -
> -	if (run_command(cmd, 0))
> -		return -ENOEXEC;
> -
> -	if (run_command("bcb store", 0))
> -		return -EIO;
> -
> -	return 0;
> -}
> diff --git a/include/fastboot.h b/include/fastboot.h
> index 8e9ee80907df..b86b508e69fd 100644
> --- a/include/fastboot.h
> +++ b/include/fastboot.h
> @@ -52,15 +52,6 @@ enum fastboot_reboot_reason {
>  	FASTBOOT_REBOOT_REASONS_COUNT
>  };
>  
> -/**
> - * BCB boot commands
> - */
> -static const char * const fastboot_boot_cmds[] = {
> -	[FASTBOOT_REBOOT_REASON_BOOTLOADER] = "bootonce-bootloader",
> -	[FASTBOOT_REBOOT_REASON_FASTBOOTD] = "boot-fastboot",
> -	[FASTBOOT_REBOOT_REASON_RECOVERY] = "boot-recovery"
> -};
> -
>  /**
>   * fastboot_response() - Writes a response of the form "$tag$reason".
>   *

If this patch is still needed - please rebase it on newest master
(after the incoming PR) as it causes build breaks.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210123/7db9611c/attachment.sig>