public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: u-boot@lists.denx.de
Subject: [PATCH] arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz
Date: Wed, 27 Jan 2021 17:12:00 +0100	[thread overview]
Message-ID: <20210127161200.1317-1-pali@kernel.org> (raw)

From: Konstantin Porotchkin <kostap@marvell.com>

While the SPI controller speed is defined by DTS, the maximum
slave speed (connected devices) is limited by the pre-defined
configuration value CONFIG_SF_DEFAULT_SPEED to 1MHz
This patch increases this maximum SPI slave device speed to 40MHz

Change-Id: I0d1239bd8a2061c66725c2c227c1e1f49c92c29e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/59516
Tested-by: iSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
[pali: Set CONFIG_SF_DEFAULT_SPEED via defconfig]
Signed-off-by: Pali Roh?r <pali@kernel.org>
---
 configs/mvebu_espressobin-88f3720_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 8a859cba2e..4956199ccd 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -54,6 +54,7 @@ CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_XENON=y
 CONFIG_MTD=y
 CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
-- 
2.20.1

             reply	other threads:[~2021-01-27 16:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-27 16:12 Pali Rohár [this message]
2021-02-02 14:56 ` [PATCH] arm: mvebu: Espressobin: Set the maximum slave SPI speed to 40MHz Stefan Roese
2021-02-08 11:39 ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210127161200.1317-1-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox