From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandru Gagniuc Date: Thu, 28 Jan 2021 09:52:46 -0600 Subject: [PATCH v5 4/6] doc: signature.txt: Document devicetree format for ECDSA keys In-Reply-To: <20210128155248.1536195-1-mr.nuke.me@gmail.com> References: <20210128155248.1536195-1-mr.nuke.me@gmail.com> Message-ID: <20210128155248.1536195-5-mr.nuke.me@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Alexandru Gagniuc Reviewed-by: Simon Glass --- doc/uImage.FIT/signature.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt index a3455889ed..0139295d33 100644 --- a/doc/uImage.FIT/signature.txt +++ b/doc/uImage.FIT/signature.txt @@ -142,7 +142,7 @@ public key in U-Boot's control FDT (using CONFIG_OF_CONTROL). Public keys should be stored as sub-nodes in a /signature node. Required properties are: -- algo: Algorithm name (e.g. "sha1,rsa2048") +- algo: Algorithm name (e.g. "sha1,rsa2048" or "sha256,ecdsa256") Optional properties are: @@ -167,6 +167,11 @@ For RSA the following are mandatory: - rsa,r-squared: (2^num-bits)^2 as a big-endian multi-word integer - rsa,n0-inverse: -1 / modulus[0] mod 2^32 +For ECDSA the following are mandatory: +- ecdsa,curve: Name of ECDSA curve (e.g. "prime256v1") +- ecdsa,x-point: Public key X coordinate as a big-endian multi-word integer +- ecdsa,y-point: Public key Y coordinate as a big-endian multi-word integer + These parameters can be added to a binary device tree using parameter -K of the mkimage command:: -- 2.26.2