[PATCH 02/13] arm: imx: Remove unused CONFIG_xxx_TAG support

[Tom Rini <trini@konsulko.com>]

On Thu, Feb 04, 2021 at 08:26:52AM -0500, Tom Rini wrote:
> On Thu, Feb 04, 2021 at 06:56:47AM -0300, Fabio Estevam wrote:
> > Hi Tom,
> > 
> > [Adding Bryan]
> > 
> > On Thu, Feb 4, 2021 at 12:49 AM Tom Rini <trini@konsulko.com> wrote:
> > 
> > > CONFIG_SERIAL_TAG is only used to configure the ATAG serial record.  It
> > > does nothing else.  On i.MX8* this is already being discarded.  On i.MX7
> > > we see things like:
> > >             warp7          : all -144 rodata +32 text -176
> > >                u-boot: add: 0/-2, grow: 0/-2 bytes: 0/-160 (-160)
> > >                  function                                   old     new   delta
> > >                  params                                       4       -      -4
> > >                  get_board_serial                            20       -     -20
> > >                  board_late_init                             96      56     -40
> > >                  boot_prep_linux                            156      60     -96
> > 
> > But then it will remove the support of reading serial number via fuses
> > which was added by:
> > 
> > commit 852cc548b3fdf6d5b46e2a96f876d14608ccdcf4
> > Author: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> > Date:   Mon Mar 26 15:27:34 2018 +0100
> > 
> >     warp7: Set u-boot serial# based on OTP value
> > 
> >     u-boot has a standard "serial#" environment variable that is suitable
> >     for storing the iSerial number we will supply via the USB device
> >     descriptor. serial# is automatically picked up by the disk subsystem in
> >     u-boot - thus providing a handy unique identifier in /dev/disk/by-id as
> >     detailed below.
> > 
> >     Storing the hardware serial identifier in serial# means we can change the
> >     serial# if we want before USB enumeration - thus making iSerial automatic
> >     via OTP but overridable if necessary.
> > 
> >     This patch reads the defined OTP fuse and sets environment variable
> >     "serial#" to the value read.
> > 
> >     With this patch in place the USB mass storage device will appear in
> >     /dev/disk/by-id with a unique name based on the OTP value. For example
> > 
> >     /dev/disk/by-id/usb-Linux_UMS_disk_0_WaRP7-0xf42400d3000001d4-0:0
> > 
> >     Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> >     Cc: Fabio Estevam <fabio.estevam@nxp.com>
> >     Cc: Rui Miguel Silva <rui.silva@linaro.org>
> >     Cc: Ryan Harkin <ryan.harkin@linaro.org>
> >     Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> 
> I did miss that one.  I'm not sure if that's abusing a symbol or clever
> use of the symbol.  I will have to v2 this one then.

This should end up under CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG someway or
another.  I'm going to make an attempt at it, but the biggest hurdle is
that most often "serial#" is just the fuse(s) value and not prepended by
a board-specific string (OR if it is, it's just in the fdt property we
read and set from).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210204/ff6f289c/attachment.sig>