public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: u-boot@lists.denx.de
Subject: [RESEND PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it
Date: Fri,  5 Feb 2021 20:11:56 +0100	[thread overview]
Message-ID: <20210205191212.7644-1-pali@kernel.org> (raw)

This series contain resensed patches from two patch series:
* Nokia RX-51: Fix USB TTY console and enable it
* usbtty/musb: Fix file transfers
They are rebased on top of master branch.

This patch series fix usbtty code (serial console via USB peripheral
mode), fix underlying musb peripheral code, fix compilation of
CONFIG_USB_DEVICE (used by usbtty), remove unused Nokia RX-51 code to
decrease size of U-Boot binary and finally enable usbtty serial console
for Nokia RX-51.

With this patch series debugging of Nokia RX-51 can be done also via USB
serial console.

It fixes also stability of musb code and allows usage of file transfers
via Kermit protocol on Nokia RX-51. Kermit file transfer via U-Boot loadb
command is stable on Nokia N900 and gives about 52kB/s transfer rate.

On computer this serial console is accessible via /dev/ttyACM0 device.

Pali Roh?r (16):
  serial: usbtty: Fix puts function
  serial: usbtty: Send urb data in correct order
  usb: musb: Fix compilation of gadget code
  usb: musb: Always clear the data toggle bit when configuring ep
  usb: musb: Fix configuring FIFO for endpoints
  usb: musb: Read value of PERI_RXCSR to 16bit variable
  usb: musb: Fix transmission of bigger buffers
  usb: musb: Fix receiving of bigger buffers
  usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand
  usb: musb: Ensure that we set musb dynamic FIFO buffer for every
    endpoint
  usb: gadget: Use dbg_ep0() macro instead of serial_printf()
  arm: omap3: Compile lowlevel_init() function only when it is used
  arm: omap3: Compile s_init() function only when it is used
  Nokia RX-51: Remove function set_muxconf_regs()
  Nokia RX-51: Move content of rx51.h to rx51.c
  Nokia RX-51: Enable usbtty serial console by default

 Makefile                                  |   1 +
 arch/arm/mach-omap2/omap3/board.c         |   3 +
 arch/arm/mach-omap2/omap3/lowlevel_init.S |   6 +-
 board/nokia/rx51/rx51.c                   |  28 +-
 board/nokia/rx51/rx51.h                   | 377 ----------------------
 configs/nokia_rx51_defconfig              |   7 +-
 doc/README.nokia_rx51                     |  15 +-
 drivers/serial/usbtty.c                   |  16 +-
 drivers/usb/gadget/ep0.c                  |  16 +-
 drivers/usb/musb/musb_core.c              |  12 +-
 drivers/usb/musb/musb_udc.c               |  61 ++--
 include/configs/nokia_rx51.h              |  21 +-
 12 files changed, 82 insertions(+), 481 deletions(-)
 delete mode 100644 board/nokia/rx51/rx51.h

-- 
2.20.1

             reply	other threads:[~2021-02-05 19:11 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 19:11 Pali Rohár [this message]
2021-02-05 19:11 ` [RESEND PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-06 13:49   ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-06 13:56   ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-06 13:57   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-06 13:58   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-06  8:58   ` Pavel Machek
2021-02-06 14:01   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-06 14:01   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-06 14:07   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-06 14:15   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-06 14:17   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-06  9:04   ` Pavel Machek
2021-02-06 15:18   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-06 15:19   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-06 15:21   ` Lukasz Majewski
2021-02-06 15:40   ` Marek Vasut
2021-02-06 15:45     ` Pali Rohár
2021-02-06 16:50       ` Marek Vasut
2021-02-07 13:50         ` Pali Rohár
2021-02-07 14:33           ` Marek Vasut
2021-02-05 19:12 ` [RESEND PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-06 15:21   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-06 15:22   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-06 15:23   ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-06  9:10   ` Pavel Machek
2021-02-06 15:24   ` Lukasz Majewski
2021-02-07 13:50 ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-07 13:50   ` [RESEND v2 PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-20 10:50     ` [AZURE FIX RESEND " Pali Rohár
2021-02-08 22:15   ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Lukasz Majewski
2021-02-08 22:21     ` Pali Rohár
2021-02-08 22:34       ` Pali Rohár
2021-02-08 22:45         ` Marek Vasut
2021-02-08 22:54           ` Pali Rohár
2021-02-13 10:20         ` Pali Rohár
2021-02-16  8:28           ` Lukasz Majewski
2021-02-19  0:38             ` Pali Rohár
2021-02-20  8:20               ` Lukasz Majewski
2021-02-20 10:54                 ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210205191212.7644-1-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox