From: Pavel Machek <pavel@ucw.cz>
To: u-boot@lists.denx.de
Subject: [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint
Date: Sat, 6 Feb 2021 10:04:51 +0100 [thread overview]
Message-ID: <20210206090451.GC15736@amd> (raw)
In-Reply-To: <20210205191212.7644-11-pali@kernel.org>
On Fri 2021-02-05 20:12:06, Pali Roh?r wrote:
> If we do not set FIFO buffer address and size for some endpoint which is in
> use then default address 0x0 would be used which is in conflict with FIFO
> buffer for endpoint 0 which is at fixed address 0x0. Sharing address space
> between more endpoint cause data loss and unexpected errors.
>
> This patch is fixing transmission of characters over usbtty serial console
> and allow using of usbtty for debugging purposes on Nokia N900.
>
> Signed-off-by: Pali Roh?r <pali@kernel.org>
6-10: Acked-by: Pavel Machek <pavel@ucw.cz>
Regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210206/d1dfdd7e/attachment.sig>
next prev parent reply other threads:[~2021-02-06 9:04 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 19:11 [RESEND PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Pali Rohár
2021-02-05 19:11 ` [RESEND PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-06 13:49 ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-06 13:56 ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-06 13:57 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-06 13:58 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-06 8:58 ` Pavel Machek
2021-02-06 14:01 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-06 14:01 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-06 14:07 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-06 14:15 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-06 14:17 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-06 9:04 ` Pavel Machek [this message]
2021-02-06 15:18 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-06 15:19 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-06 15:21 ` Lukasz Majewski
2021-02-06 15:40 ` Marek Vasut
2021-02-06 15:45 ` Pali Rohár
2021-02-06 16:50 ` Marek Vasut
2021-02-07 13:50 ` Pali Rohár
2021-02-07 14:33 ` Marek Vasut
2021-02-05 19:12 ` [RESEND PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-06 15:21 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-06 15:22 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-06 15:23 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-06 9:10 ` Pavel Machek
2021-02-06 15:24 ` Lukasz Majewski
2021-02-07 13:50 ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-20 10:50 ` [AZURE FIX RESEND " Pali Rohár
2021-02-08 22:15 ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Lukasz Majewski
2021-02-08 22:21 ` Pali Rohár
2021-02-08 22:34 ` Pali Rohár
2021-02-08 22:45 ` Marek Vasut
2021-02-08 22:54 ` Pali Rohár
2021-02-13 10:20 ` Pali Rohár
2021-02-16 8:28 ` Lukasz Majewski
2021-02-19 0:38 ` Pali Rohár
2021-02-20 8:20 ` Lukasz Majewski
2021-02-20 10:54 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210206090451.GC15736@amd \
--to=pavel@ucw.cz \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox