[RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf()

[Lukasz Majewski <lukma@denx.de>]

On Fri,  5 Feb 2021 20:12:07 +0100
Pali Roh?r <pali@kernel.org> wrote:

> All debug messages from ep0.c except a few are printed by dbg_ep0()
> macro. So for remaining few exception use also dbg_ep0() instead of
> serial_printf().

Reviewed-by: Lukasz Majewski <lukma@denx.de>

> 
> Signed-off-by: Pali Roh?r <pali@kernel.org>
> ---
>  drivers/usb/gadget/ep0.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c
> index 457679f0a4..6624f61b76 100644
> --- a/drivers/usb/gadget/ep0.c
> +++ b/drivers/usb/gadget/ep0.c
> @@ -294,7 +294,7 @@ static int ep0_get_descriptor (struct
> usb_device_instance *device, {
>  			struct usb_string_descriptor
> *string_descriptor; if (!(string_descriptor = usbd_get_string
> (index))) {
> -				serial_printf("Invalid string index
> %d\n", index);
> +				dbg_ep0(0, "Invalid string index
> %d\n", index); return -1;
>  			}
>  			dbg_ep0(3, "string_descriptor: %p length
> %d", string_descriptor, string_descriptor->bLength); @@ -302,14
> +302,14 @@ static int ep0_get_descriptor (struct usb_device_instance
> *device, } break;
>  	case USB_DESCRIPTOR_TYPE_INTERFACE:
> -	serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not
> implemented\n");
> +		dbg_ep0(2, "USB_DESCRIPTOR_TYPE_INTERFACE - error
> not implemented\n"); return -1;
>  	case USB_DESCRIPTOR_TYPE_ENDPOINT:
> -		serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error
> not implemented\n");
> +		dbg_ep0(2, "USB_DESCRIPTOR_TYPE_ENDPOINT - error not
> implemented\n"); return -1;
>  	case USB_DESCRIPTOR_TYPE_HID:
>  		{
> -			serial_printf("USB_DESCRIPTOR_TYPE_HID -
> error not implemented\n");
> +			dbg_ep0(2, "USB_DESCRIPTOR_TYPE_HID - error
> not implemented\n"); return -1;	/* unsupported at this time */
>  #if 0
>  			int bNumInterface =
> @@ -338,7 +338,7 @@ static int ep0_get_descriptor (struct
> usb_device_instance *device, break;
>  	case USB_DESCRIPTOR_TYPE_REPORT:
>  		{
> -			serial_printf("USB_DESCRIPTOR_TYPE_REPORT -
> error not implemented\n");
> +			dbg_ep0(2, "USB_DESCRIPTOR_TYPE_REPORT -
> error not implemented\n"); return -1;	/* unsupported at this
> time */ #if 0
>  			int bNumInterface =
> @@ -531,7 +531,7 @@ int ep0_recv_setup (struct urb *urb)
>  						   le16_to_cpu
> (request->wValue) & 0xff); 
>  		case USB_REQ_GET_CONFIGURATION:
> -			serial_printf("get config %d\n",
> device->configuration);
> +			dbg_ep0(2, "get config %d\n",
> device->configuration); return ep0_get_one (device, urb,
>  					    device->configuration);
>  
> @@ -621,14 +621,14 @@ int ep0_recv_setup (struct urb *urb)
>  			device->interface = device->alternate = 0;
>  
>  			/*dbg_ep0(2, "set configuration: %d",
> device->configuration); */
> -			/*serial_printf("DEVICE_CONFIGURED..
> event?\n"); */
> +			/*dbg_ep0(2, "DEVICE_CONFIGURED..
> event?\n"); */ return 0;
>  
>  		case USB_REQ_SET_INTERFACE:
>  			device->interface = le16_to_cpu
> (request->wIndex); device->alternate = le16_to_cpu (request->wValue);
>  			/*dbg_ep0(2, "set interface: %d alternate:
> %d", device->interface, device->alternate); */
> -			serial_printf("DEVICE_SET_INTERFACE..
> event?\n");
> +			dbg_ep0(2, "DEVICE_SET_INTERFACE..
> event?\n"); return 0;
>  
>  		case USB_REQ_GET_STATUS:




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210206/665389e2/attachment.sig>