From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c
Date: Sat, 6 Feb 2021 16:23:14 +0100 [thread overview]
Message-ID: <20210206162314.40f59089@jawa> (raw)
In-Reply-To: <20210205191212.7644-16-pali@kernel.org>
On Fri, 5 Feb 2021 20:12:11 +0100
Pali Roh?r <pali@kernel.org> wrote:
> After removal of MUX configuration there is no need to have extra
> rx51.h.
>
> Signed-off-by: Pali Roh?r <pali@kernel.org>
> ---
> board/nokia/rx51/rx51.c | 17 ++++++++++++++++-
> board/nokia/rx51/rx51.h | 31 -------------------------------
> 2 files changed, 16 insertions(+), 32 deletions(-)
> delete mode 100644 board/nokia/rx51/rx51.h
>
> diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
> index cb72ffaaa9..0597a94faa 100644
> --- a/board/nokia/rx51/rx51.c
> +++ b/board/nokia/rx51/rx51.c
> @@ -39,9 +39,24 @@
> #include <asm/arch/sys_proto.h>
> #include <asm/arch/mmc_host_def.h>
>
> -#include "rx51.h"
> #include "tag_omap.h"
>
> +/* Needed for ROM SMC call */
> +struct emu_hal_params_rx51 {
> + u32 num_params;
> + u32 param1;
> + u32 param2;
> + u32 param3;
> + u32 param4;
> +};
> +
> +#define ONENAND_GPMC_CONFIG1_RX51 0xfb001202
> +#define ONENAND_GPMC_CONFIG2_RX51 0x00111100
> +#define ONENAND_GPMC_CONFIG3_RX51 0x00020200
> +#define ONENAND_GPMC_CONFIG4_RX51 0x11001102
> +#define ONENAND_GPMC_CONFIG5_RX51 0x03101616
> +#define ONENAND_GPMC_CONFIG6_RX51 0x90060000
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> GraphicDevice gdev;
> diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h
> deleted file mode 100644
> index 0eddb06219..0000000000
> --- a/board/nokia/rx51/rx51.h
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2012
> - * ?????? ???????? <freemangordon@abv.bg>
> - *
> - * (C) Copyright 2011-2012
> - * Pali Roh?r <pali@kernel.org>
> - *
> - * (C) Copyright 2008
> - * Dirk Behme <dirk.behme@gmail.com>
> - */
> -#ifndef _RX51_H_
> -#define _RX51_H_
> -
> -/* Needed for ROM SMC call */
> -struct emu_hal_params_rx51 {
> - u32 num_params;
> - u32 param1;
> - u32 param2;
> - u32 param3;
> - u32 param4;
> -};
> -
> -#define ONENAND_GPMC_CONFIG1_RX51 0xfb001202
> -#define ONENAND_GPMC_CONFIG2_RX51 0x00111100
> -#define ONENAND_GPMC_CONFIG3_RX51 0x00020200
> -#define ONENAND_GPMC_CONFIG4_RX51 0x11001102
> -#define ONENAND_GPMC_CONFIG5_RX51 0x03101616
> -#define ONENAND_GPMC_CONFIG6_RX51 0x90060000
> -
> -#endif
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210206/acbb3bd7/attachment.sig>
next prev parent reply other threads:[~2021-02-06 15:23 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 19:11 [RESEND PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Pali Rohár
2021-02-05 19:11 ` [RESEND PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-06 13:49 ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-06 13:56 ` Lukasz Majewski
2021-02-05 19:11 ` [RESEND PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-06 13:57 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-06 13:58 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-06 8:58 ` Pavel Machek
2021-02-06 14:01 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-06 14:01 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-06 14:07 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-06 14:15 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-06 14:17 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-06 9:04 ` Pavel Machek
2021-02-06 15:18 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-06 15:19 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-06 15:21 ` Lukasz Majewski
2021-02-06 15:40 ` Marek Vasut
2021-02-06 15:45 ` Pali Rohár
2021-02-06 16:50 ` Marek Vasut
2021-02-07 13:50 ` Pali Rohár
2021-02-07 14:33 ` Marek Vasut
2021-02-05 19:12 ` [RESEND PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-06 15:21 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-06 15:22 ` Lukasz Majewski
2021-02-05 19:12 ` [RESEND PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-06 15:23 ` Lukasz Majewski [this message]
2021-02-05 19:12 ` [RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-06 9:10 ` Pavel Machek
2021-02-06 15:24 ` Lukasz Majewski
2021-02-07 13:50 ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 01/16] serial: usbtty: Fix puts function Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 02/16] serial: usbtty: Send urb data in correct order Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 03/16] usb: musb: Fix compilation of gadget code Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 04/16] usb: musb: Always clear the data toggle bit when configuring ep Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 05/16] usb: musb: Fix configuring FIFO for endpoints Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 06/16] usb: musb: Read value of PERI_RXCSR to 16bit variable Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 07/16] usb: musb: Fix transmission of bigger buffers Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 08/16] usb: musb: Fix receiving " Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 09/16] usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 10/16] usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 11/16] usb: gadget: Use dbg_ep0() macro instead of serial_printf() Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 12/16] arm: omap3: Compile lowlevel_init() function only when it is used Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 13/16] arm: omap3: Compile s_init() " Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 14/16] Nokia RX-51: Remove function set_muxconf_regs() Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 15/16] Nokia RX-51: Move content of rx51.h to rx51.c Pali Rohár
2021-02-07 13:50 ` [RESEND v2 PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default Pali Rohár
2021-02-20 10:50 ` [AZURE FIX RESEND " Pali Rohár
2021-02-08 22:15 ` [RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it Lukasz Majewski
2021-02-08 22:21 ` Pali Rohár
2021-02-08 22:34 ` Pali Rohár
2021-02-08 22:45 ` Marek Vasut
2021-02-08 22:54 ` Pali Rohár
2021-02-13 10:20 ` Pali Rohár
2021-02-16 8:28 ` Lukasz Majewski
2021-02-19 0:38 ` Pali Rohár
2021-02-20 8:20 ` Lukasz Majewski
2021-02-20 10:54 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210206162314.40f59089@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox