[RESEND PATCH 16/16] Nokia RX-51: Enable usbtty serial console by default

[Lukasz Majewski <lukma@denx.de>]

On Fri,  5 Feb 2021 20:12:12 +0100
Pali Roh?r <pali@kernel.org> wrote:

> Now when usbtty serial console is fixed in U-Boot enable
> CONFIG_USB_TTY for Nokia RX-51 board by default.
> 
> Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro
> and include U-Boot string into USB product name to indicate usage of
> U-Boot.
> 
> CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
> all in/out devices. Therefore there is no need to have separate
> commands 'run sercon', 'run usbcon' and 'run vgacon', so remove them.
> 
> As space for U-Boot is limited to 256kB, disable some other unused
> options so CONFIG_USB_TTY can be enabled.
> 
> Nokia RX-51 does not have easily accessible UART serial console so
> the only option for easy debugging is to use device's keyboard+screen
> or this usbtty serial console over USB.
> 
> Signed-off-by: Pali Roh?r <pali@kernel.org>
> ---
>  configs/nokia_rx51_defconfig |  7 ++++---
>  doc/README.nokia_rx51        | 15 +--------------
>  include/configs/nokia_rx51.h | 21 +++++++--------------
>  3 files changed, 12 insertions(+), 31 deletions(-)
> 
> diff --git a/configs/nokia_rx51_defconfig
> b/configs/nokia_rx51_defconfig index 3b782715c7..bce55c4fe5 100644
> --- a/configs/nokia_rx51_defconfig
> +++ b/configs/nokia_rx51_defconfig
> @@ -13,6 +13,7 @@ CONFIG_AUTOBOOT_MENU_SHOW=y
>  CONFIG_USE_PREBOOT=y
>  CONFIG_PREBOOT="run preboot"
>  CONFIG_CONSOLE_MUX=y
> +# CONFIG_SYS_DEVICE_NULLDEV is not set
>  CONFIG_HUSH_PARSER=y
>  CONFIG_SYS_PROMPT="Nokia RX-51 # "
>  # CONFIG_CMD_BDI is not set
> @@ -47,9 +48,11 @@ CONFIG_ENV_OVERWRITE=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  # CONFIG_NET is not set
>  CONFIG_DM=y
> +# CONFIG_DM_WARN is not set
>  # CONFIG_DM_DEVICE_REMOVE is not set
> +# CONFIG_DM_SEQ_ALIAS is not set
> +# CONFIG_BLOCK_CACHE is not set
>  CONFIG_DM_I2C=y
> -CONFIG_TWL4030_LED=y
>  CONFIG_DM_MMC=y
>  # CONFIG_MMC_HW_PARTITIONING is not set
>  # CONFIG_MMC_VERBOSE is not set
> @@ -59,10 +62,8 @@ CONFIG_CONS_INDEX=3
>  CONFIG_SYS_NS16550=y
>  CONFIG_SPI=y
>  CONFIG_USB=y
> -CONFIG_USB_MUSB_HCD=y
>  CONFIG_USB_MUSB_UDC=y
>  CONFIG_USB_OMAP3=y
> -CONFIG_TWL4030_USB=y
>  CONFIG_CFB_CONSOLE=y
>  CONFIG_CFB_CONSOLE_ANSI=y
>  # CONFIG_VGA_AS_SINGLE_DEVICE is not set
> diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
> index 320b5efc7d..84d1912ddd 100644
> --- a/doc/README.nokia_rx51
> +++ b/doc/README.nokia_rx51
> @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in
> following repository: There is support for hardware watchdog.
> Hardware watchdog is started by NOLO so u-boot must kick watchdog to
> prevent reboot device (but not very often, max every 2 seconds).
> There is also support for framebuffer display -output with ANSI
> escape codes and the N900 HW keyboard input. USB tty works -but is
> disabled because it prevents the current Maemo kernel from booting.
> +output with ANSI escape codes and the N900 HW keyboard input. 
>  When U-Boot is starting it enable IBE bit in Auxiliary Control
> Register, which is needed for Thumb-2 ISA support. It is workaround
> for errata 430973. @@ -49,10 +48,6 @@ Boot from SD or eMMC in this
> order: 
>  Available additional commands/variables:
>  
> - * run sercon - Use serial port for control
> - * run usbcon - Use usbtty for control
> - * run vgacon - Use framebuffer and HW keyboard for control (default)
> -
>   * run sdboot - Boot from external SD card (see boot order)
>   * run emmcboot - Boot from internal eMMC memory (see boot order)
>   * run attachboot - Boot attached kernel image (attached to U-Boot
> binary) @@ -87,14 +82,6 @@ Additional variables for booting kernel:
>   and u-boot standard output is set to serial then setup_console_atag
> is automatically set to 1. So output from Maemo kernel would go to
> serial port. 
> -USB TTY:
> -
> - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY
> is disabled.
> - For enabling USB TTY just add this line to file
> include/configs/nokia_rx51.h -
> - #define CONFIG_USB_TTY
> -
> -
>  UBIFS support:
>  
>   UBIFS support is disabled, because U-Boot image is too big and
> cannot be diff --git a/include/configs/nokia_rx51.h
> b/include/configs/nokia_rx51.h index 3f2700d8e2..23368de624 100644
> --- a/include/configs/nokia_rx51.h
> +++ b/include/configs/nokia_rx51.h
> @@ -70,10 +70,12 @@
>  
>  /* USB device configuration */
>  #define CONFIG_USB_DEVICE
> +#define CONFIG_USB_TTY
>  #define CONFIG_USBD_VENDORID		0x0421
> -#define CONFIG_USBD_PRODUCTID		0x01c8
> +#define CONFIG_USBD_PRODUCTID_CDCACM	0x01c8
> +#define CONFIG_USBD_PRODUCTID_GSERIAL	0x01c8
>  #define CONFIG_USBD_MANUFACTURER	"Nokia"
> -#define CONFIG_USBD_PRODUCT_NAME	"N900"
> +#define CONFIG_USBD_PRODUCT_NAME	"N900 (U-Boot)"
>  
>  #define GPIO_SLIDE			71
>  
> @@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>  /* Environment information */
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	"usbtty=cdc_acm\0" \
> -	"stdin=serial,vga\0" \
> -	"stdout=serial,vga\0" \
> -	"stderr=serial,vga\0" \
> -	"setcon=setenv stdin ${con};" \
> -		"setenv stdout ${con};" \
> -		"setenv stderr ${con}\0" \
> -	"sercon=setenv con serial; run setcon\0" \
> -	"usbcon=setenv con usbtty; run setcon\0" \
> -	"vgacon=setenv con vga; run setcon\0" \
> +	"stdin=usbtty,serial,vga\0" \
> +	"stdout=usbtty,serial,vga\0" \
> +	"stderr=usbtty,serial,vga\0" \
>  	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
>  	"switchmmc=mmc dev ${mmcnum}\0" \
>  	"kernaddr=0x82008000\0" \
> @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>  #define CONFIG_POSTBOOTMENU \
>  	"echo;" \
>  	"echo Extra commands:;" \
> -	"echo run sercon - Use serial port for control.;" \
> -	"echo run usbcon - Use usbtty for control.;" \
> -	"echo run vgacon - Use framebuffer/keyboard.;" \
>  	"echo run sdboot - Boot from SD card slot.;" \
>  	"echo run emmcboot - Boot internal eMMC memory.;" \
>  	"echo run attachboot - Boot attached kernel image.;" \


Reviewed-by: Lukasz Majewski <lukma@denx.de>

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210206/859d7c3f/attachment.sig>