From: Igor Opaniuk <igor.opaniuk@foundries.io>
To: u-boot@lists.denx.de
Subject: [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL
Date: Tue, 9 Feb 2021 01:37:54 +0200 [thread overview]
Message-ID: <20210208233755.89219-3-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20210208233755.89219-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@foundries.io>
Replace CONFIG_DM_I2C undefs with CONFIG_SPL_DM_I2C for the SPL build
case. This should be moved to appropriate board defconfigs
in the future.
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
---
(no changes since v1)
include/configs/T104xRDB.h | 2 +-
include/configs/imx8mp_evk.h | 2 +-
include/configs/ls1021atwr.h | 2 +-
include/configs/ls1046a_common.h | 2 +-
include/configs/phycore_imx8mp.h | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index aee00a86cf..f4d0aec42b 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -30,7 +30,7 @@
#define CONFIG_SPL_SKIP_RELOCATE
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#undef CONFIG_DM_I2C
+#undef CONFIG_SPL_DM_I2C
#endif
#define RESET_VECTOR_OFFSET 0x27FFC
#define BOOT_PAGE_OFFSET 0x27000
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 4850b1b934..33c5759b46 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -37,7 +37,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PCA9450
-#undef CONFIG_DM_I2C
+#undef CONFIG_SPL_DM_I2C
#define CONFIG_SYS_I2C
#endif
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3e85bb3850..f2bf35ffa5 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -435,7 +435,7 @@
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#undef CONFIG_DM_I2C
+#undef CONFIG_SPL_DM_I2C
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index d44a7f105e..b5bbb636da 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,7 +16,7 @@
#define SPL_NO_QSPI
#define SPL_NO_USB
#define SPL_NO_SATA
-#undef CONFIG_DM_I2C
+#undef CONFIG_SPL_DM_I2C
#endif
#if defined(CONFIG_SPL_BUILD) && \
(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 889dd36e6e..dcd320f746 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -33,7 +33,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PCA9450
-#undef CONFIG_DM_I2C
+#undef CONFIG_SPL_DM_I2C
#define CONFIG_SYS_I2C
#endif
--
2.25.1
next prev parent reply other threads:[~2021-02-08 23:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 23:37 [PATCH v2 0/3] Allow disabling driver model for I2C in SPL Igor Opaniuk
2021-02-08 23:37 ` [PATCH v2 1/3] dm: i2c: allow disabling driver model " Igor Opaniuk
2021-02-08 23:37 ` Igor Opaniuk [this message]
2021-02-09 2:26 ` [PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL Tom Rini
2021-02-09 8:44 ` Igor Opaniuk
2021-02-09 9:28 ` Igor Opaniuk
2021-02-08 23:37 ` [PATCH v2 3/3] dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO Igor Opaniuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210208233755.89219-3-igor.opaniuk@gmail.com \
--to=igor.opaniuk@foundries.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox