From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Subject: [PATCH 6/6] configs: Enable USB3 on Allwinner H6 boards
Date: Tue, 9 Feb 2021 01:42:49 +0000 [thread overview]
Message-ID: <20210209014249.5fa6dce0@slackpad.fritz.box> (raw)
In-Reply-To: <20210208055724.58673-7-samuel@sholland.org>
On Sun, 7 Feb 2021 23:57:24 -0600
Samuel Holland <samuel@sholland.org> wrote:
Hi,
(CC:ing Maxime and Chen-Yu)
> Pine H64 and Orange Pi 3 both provide a USB3 type A port.
> Enable it in U-Boot.
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
That looks good to me, but the Pine H64 does not enable the USB
3.0 controller in its .dts file.
I just added status = "okay"; to the dwc3 and PHY nodes and it
worked, though.
Does anyone know a reason this is not enabled in the mainline DT (which
we just synced)?
Cheers,
Andre
> ---
> configs/orangepi_3_defconfig | 5 +++++
> configs/pine_h64_defconfig | 5 +++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
> index 82b9815205e..eb25bd9f504 100644
> --- a/configs/orangepi_3_defconfig
> +++ b/configs/orangepi_3_defconfig
> @@ -8,5 +8,10 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
> CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3"
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_PHY_SUN50I_USB3=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_DWC3=y
> +# CONFIG_USB_DWC3_GADGET is not set
> diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
> index 2fa66f38343..0095fb222e6 100644
> --- a/configs/pine_h64_defconfig
> +++ b/configs/pine_h64_defconfig
> @@ -12,5 +12,10 @@ CONFIG_SPL_SPI_SUNXI=y
> CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> CONFIG_SUN8I_EMAC=y
> +CONFIG_PHY_SUN50I_USB3=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_DWC3=y
> +# CONFIG_USB_DWC3_GADGET is not set
next prev parent reply other threads:[~2021-02-09 1:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 5:57 [PATCH 0/6] Allwinner H6 USB3 support Samuel Holland
2021-02-08 5:57 ` [PATCH 1/6] clk: sunxi: Add a dummy clock driver for the RTC Samuel Holland
2021-03-28 22:51 ` Andre Przywara
2021-02-08 5:57 ` [PATCH 2/6] clk: sunxi: h6: Add XHCI clocks Samuel Holland
2021-02-09 1:33 ` Andre Przywara
2021-02-08 5:57 ` [PATCH 3/6] phy: sun50i-usb3: Add a driver for the H6 USB3 PHY Samuel Holland
2021-02-09 1:33 ` Andre Przywara
2021-02-08 5:57 ` [PATCH 4/6] usb: xhci-pci: Move reset logic out of XHCI core Samuel Holland
2021-02-08 11:43 ` Marek Vasut
2021-02-09 1:42 ` Andre Przywara
2021-02-09 2:27 ` Samuel Holland
2021-02-09 2:28 ` Samuel Holland
2021-02-09 9:45 ` Marek Vasut
2021-02-08 5:57 ` [PATCH 5/6] usb: xhci-dwc3: Add support for clocks/resets Samuel Holland
2021-02-09 1:42 ` Andre Przywara
2021-02-09 3:01 ` Samuel Holland
2021-02-08 5:57 ` [PATCH 6/6] configs: Enable USB3 on Allwinner H6 boards Samuel Holland
2021-02-09 1:42 ` Andre Przywara [this message]
2021-02-09 1:42 ` [PATCH 0/6] Allwinner H6 USB3 support Andre Przywara
2021-02-09 10:46 ` Andre Heider
2021-04-17 14:17 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209014249.5fa6dce0@slackpad.fritz.box \
--to=andre.przywara@arm.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox