[PATCH v3 1/3] dm: i2c: allow disabling driver model in SPL

Heiko Schocher
2021-02-21T07:02:42Z

Hello Igor,

On 09.02.21 12:52, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@foundries.io>
>
> At present if U-Boot proper uses driver model for I2C, then SPL has to
> also. While this is desirable, it places a significant barrier to moving
> to driver model in some cases. For example, with a space-constrained SPL
> it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves
> adjusting some drivers.
>
> This patch introduces a separate Kconfig symbols for enabling DM_I2C and
> DM_I2C_GPIO support in SPL.
>
> This will also help to get away from dirty workarounds to
> achieve non-DM I2C support for SPL, which is currently used in some
> board header files like:
>
> ifdef CONFIG_SPL_BUILD
> undef CONFIG_DM_I2C
> endif
>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Heiko Schocher <hs@denx.de>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
>
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - R-b tags applied (Simon and Heiko)
>
> drivers/i2c/Kconfig | 21 +++++++++++++++++++++
> drivers/i2c/Makefile | 4 ++--
> drivers/misc/Makefile | 2 +-
> 3 files changed, 24 insertions(+), 3 deletions(-)

Applied to u-boot-i2c.git master

Thanks!

bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de