From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 02/25] arm: Remove mx23evk board
Date: Tue, 9 Feb 2021 08:02:54 -0500 [thread overview]
Message-ID: <20210209130317.14883-2-trini@konsulko.com> (raw)
In-Reply-To: <20210209130317.14883-1-trini@konsulko.com>
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago. In addition there are other DM
migrations it is also missing. Remove it.
Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/mach-imx/mxs/Kconfig | 8 --
board/freescale/mx23evk/Kconfig | 15 ----
board/freescale/mx23evk/MAINTAINERS | 6 --
board/freescale/mx23evk/Makefile | 10 ---
board/freescale/mx23evk/mx23evk.c | 78 ----------------
board/freescale/mx23evk/spl_boot.c | 134 ----------------------------
configs/mx23evk_defconfig | 40 ---------
include/configs/mx23evk.h | 102 ---------------------
8 files changed, 393 deletions(-)
delete mode 100644 board/freescale/mx23evk/Kconfig
delete mode 100644 board/freescale/mx23evk/MAINTAINERS
delete mode 100644 board/freescale/mx23evk/Makefile
delete mode 100644 board/freescale/mx23evk/mx23evk.c
delete mode 100644 board/freescale/mx23evk/spl_boot.c
delete mode 100644 configs/mx23evk_defconfig
delete mode 100644 include/configs/mx23evk.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index fb19e36559ff..c731d01d4ed3 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -12,23 +12,15 @@ config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
select BOARD_EARLY_INIT_F
-config TARGET_MX23EVK
- bool "Support mx23evk"
- select BOARD_EARLY_INIT_F
-
config TARGET_SANSA_FUZE_PLUS
bool "Support sansa_fuze_plus"
-config TARGET_XFI3
- bool "Support xfi3"
-
endchoice
config SYS_SOC
default "mxs"
source "board/olimex/mx23_olinuxino/Kconfig"
-source "board/freescale/mx23evk/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
endif
diff --git a/board/freescale/mx23evk/Kconfig b/board/freescale/mx23evk/Kconfig
deleted file mode 100644
index 51a8f9f773cb..000000000000
--- a/board/freescale/mx23evk/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX23EVK
-
-config SYS_BOARD
- default "mx23evk"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "mx23evk"
-
-endif
diff --git a/board/freescale/mx23evk/MAINTAINERS b/board/freescale/mx23evk/MAINTAINERS
deleted file mode 100644
index b03ad6ae0af6..000000000000
--- a/board/freescale/mx23evk/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX23EVK BOARD
-M: Otavio Salvador <otavio@ossystems.com.br>
-S: Maintained
-F: board/freescale/mx23evk/
-F: include/configs/mx23evk.h
-F: configs/mx23evk_defconfig
diff --git a/board/freescale/mx23evk/Makefile b/board/freescale/mx23evk/Makefile
deleted file mode 100644
index 6fe6992a5fcd..000000000000
--- a/board/freescale/mx23evk/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-ifndef CONFIG_SPL_BUILD
-obj-y := mx23evk.o
-else
-obj-y := spl_boot.o
-endif
diff --git a/board/freescale/mx23evk/mx23evk.c b/board/freescale/mx23evk/mx23evk.c
deleted file mode 100644
index 3fbac6b5cc31..000000000000
--- a/board/freescale/mx23evk/mx23evk.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MX23EVK board
- *
- * (C) Copyright 2013 O.S. Systems Software LTDA.
- *
- * Author: Otavio Salvador <otavio@ossystems.com.br>
- *
- * Based on m28evk.c:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/gpio.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/sys_proto.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
- /* Power on LCD */
- gpio_direction_output(MX23_PAD_LCD_RESET__GPIO_1_18, 1);
-
- /* Set contrast to maximum */
- gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-static int mx23evk_mmc_wp(int id)
-{
- if (id != 0) {
- printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
- return 1;
- }
-
- return gpio_get_value(MX23_PAD_PWM4__GPIO_1_30);
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- /* Configure WP as input */
- gpio_direction_input(MX23_PAD_PWM4__GPIO_1_30);
-
- /* Configure MMC0 Power Enable */
- gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0);
-
- return mxsmmc_initialize(bis, 0, mx23evk_mmc_wp, NULL);
-}
-#endif
diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c
deleted file mode 100644
index 14e9b4a8634f..000000000000
--- a/board/freescale/mx23evk/spl_boot.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MX23EVK Boot setup
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_SSP1 (MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_LCD (MXS_PAD_4MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* DUART */
- MX23_PAD_PWM0__DUART_RX,
- MX23_PAD_PWM1__DUART_TX,
-
- /* EMI */
- MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
- MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-
- /* MMC 0 */
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP1,
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP1,
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP1,
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP1,
- MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP1,
- MX23_PAD_SSP1_DETECT__SSP1_DETECT | MUX_CONFIG_SSP1,
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_SSP1_SCK__SSP1_SCK |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* Write Protect Pin */
- MX23_PAD_PWM4__GPIO_1_30 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* Slot Power Enable */
- MX23_PAD_PWM3__GPIO_1_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* LCD */
- MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D08__LCD_D18 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D09__LCD_D19 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D10__LCD_D20 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D11__LCD_D21 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D12__LCD_D22 | MUX_CONFIG_LCD,
- MX23_PAD_GPMI_D13__LCD_D23 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_DOTCK__LCD_DOTCK | MUX_CONFIG_LCD,
- MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
- MX23_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
- MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
- MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD, /* LCD power */
- MX23_PAD_PWM2__GPIO_1_28 | MUX_CONFIG_LCD, /* LCD contrast */
-};
-
-#define HW_DRAM_CTL14 (0x38 >> 2)
-#define CS_MAP 0x3
-#define INTAREF 0x2
-#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP)
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG;
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig
deleted file mode 100644
index 0e3d9774c591..000000000000
--- a/configs/mx23evk_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX23=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_MX23EVK=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_NET is not set
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_VIDEO_BMP_GZIP=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
deleted file mode 100644
index 3f13e60531cf..000000000000
--- a/include/configs/mx23evk.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Freescale i.MX23 EVK board config
- *
- * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
- * on behalf of O.S. Systems Software LTDA.
- */
-#ifndef __CONFIGS_MX23EVK_H__
-#define __CONFIGS_MX23EVK_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK
-
-/* U-Boot Commands */
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-
-/* Environment is in MMC */
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#endif
-
-/* Framebuffer support */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
-#endif
-
-/* Boot Linux */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Extra Environments */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "update_sd_firmware_filename=u-boot.sd\0" \
- "update_sd_firmware=" /* Update the SD firmware partition */ \
- "if mmc rescan ; then " \
- "if tftp ${update_sd_firmware_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "setexpr fw_sz ${fw_sz} + 1 ; " \
- "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
- "fi ; " \
- "fi\0" \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttyAMA0\0" \
- "fdt_file=imx23-evk.dtb\0" \
- "fdt_addr=0x41000000\0" \
- "boot_fdt=try\0" \
- "mmcdev=0\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else " \
- "echo ERR: Fail to boot from MMC; " \
- "fi; " \
- "fi; " \
- "else exit; fi"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_MX23EVK_H__ */
--
2.17.1
next prev parent reply other threads:[~2021-02-09 13:02 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 13:02 [PATCH 01/25] arm: Remove xfi3 board Tom Rini
2021-02-09 13:02 ` Tom Rini [this message]
2021-02-18 3:08 ` [PATCH 02/25] arm: Remove mx23evk board Fabio Estevam
2021-02-09 13:02 ` [PATCH 03/25] arm: Remove MX23_OLINUXINO board Tom Rini
2021-02-09 13:02 ` [PATCH 04/25] arm: Remove SANSA_FUZE_PLUS board Tom Rini
2021-02-09 13:02 ` [PATCH 05/25] arm: imx: Remove MX23 support Tom Rini
2021-02-09 16:15 ` Stefano Babic
2021-02-09 13:02 ` [PATCH 06/25] arm: Remove mx28evk board Tom Rini
2021-02-09 13:11 ` Lukasz Majewski
2021-02-09 13:34 ` Tom Rini
2021-02-13 14:19 ` Fabio Estevam
2021-02-09 13:02 ` [PATCH 07/25] arm: Remove apx4devkit board Tom Rini
2021-02-09 13:08 ` [ADDRESS CONVERTED] " Lauri Hintsala
2021-02-09 13:41 ` Tom Rini
2021-02-10 5:29 ` Lauri Hintsala
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 08/25] arm: Remove sc_sps_1 board Tom Rini
2021-02-09 13:03 ` [PATCH 09/25] arm: Remove ts4600 board Tom Rini
2021-02-09 13:03 ` [PATCH 10/25] arm: Remove mx35pdk board Tom Rini
2021-02-09 16:13 ` Stefano Babic
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 11/25] arm: Remove apf27 board Tom Rini
2021-02-09 13:03 ` [PATCH 12/25] arm: Remove mx25pdk board Tom Rini
2021-02-09 13:03 ` [PATCH 13/25] arm: Remove openrd board Tom Rini
2021-02-09 13:03 ` [PATCH 14/25] arm: Remove sheevaplug board Tom Rini
2021-02-10 7:07 ` Chris Packham
2021-02-10 20:09 ` Rick Thomas
2021-02-10 20:15 ` Tom Rini
2021-02-11 0:53 ` Rick Thomas
2021-02-11 1:01 ` Rick Thomas
2021-02-11 1:55 ` Tom Rini
2021-02-11 2:40 ` Rick Thomas
2021-02-11 4:57 ` Vagrant Cascadian
2021-02-11 5:09 ` Rick Thomas
2021-02-11 20:06 ` Tom Rini
2021-03-24 21:11 ` Harm Berntsen
2021-03-24 21:22 ` Tom Rini
2021-03-24 21:54 ` Harm Berntsen
2021-03-24 22:08 ` Tom Rini
2021-02-09 13:03 ` [PATCH 15/25] arm: Remove 32bit vexpress boards Tom Rini
2021-02-09 13:03 ` [PATCH 16/25] arm: Remove gwventana boards Tom Rini
2021-02-10 17:29 ` Tim Harvey
2021-02-10 17:31 ` Tom Rini
2021-02-17 18:26 ` Tim Harvey
2021-02-17 18:35 ` Tom Rini
2021-02-22 17:24 ` Tim Harvey
2021-02-22 17:40 ` Tom Rini
2021-02-23 17:38 ` Tim Harvey
2021-03-02 17:25 ` Simon Glass
2021-02-09 13:03 ` [PATCH 17/25] arm: Remove secomx6quq7 board Tom Rini
2021-02-09 13:03 ` [PATCH 18/25] arm: Remove ls2080a_simu board Tom Rini
2021-02-11 10:27 ` Priyanka Jain
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 19/25] arm: Remove s32v234evb board Tom Rini
2021-02-09 13:03 ` [PATCH 20/25] arm: Remove bcm958712k board Tom Rini
2021-02-09 13:03 ` [PATCH 21/25] arm: Remove wb45n board Tom Rini
2021-02-09 13:03 ` [PATCH 22/25] arm: Remove wb50n board Tom Rini
2021-02-09 13:03 ` [PATCH 23/25] arm: Remove picosam9g45 board Tom Rini
2021-02-09 13:03 ` [PATCH 24/25] arm: Remove db-88f6281-bp board Tom Rini
2021-02-10 6:52 ` Chris Packham
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 25/25] arm: Remove warp board Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209130317.14883-2-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox