From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 09/25] arm: Remove ts4600 board
Date: Tue, 9 Feb 2021 08:03:01 -0500 [thread overview]
Message-ID: <20210209130317.14883-9-trini@konsulko.com> (raw)
In-Reply-To: <20210209130317.14883-1-trini@konsulko.com>
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago. In addition there are other DM
migrations it is also missing. Remove it.
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/mach-imx/mxs/Kconfig | 4 -
board/technologic/ts4600/Kconfig | 15 ---
board/technologic/ts4600/MAINTAINERS | 6 --
board/technologic/ts4600/Makefile | 9 --
board/technologic/ts4600/iomux.c | 148 ---------------------------
board/technologic/ts4600/ts4600.c | 90 ----------------
configs/ts4600_defconfig | 30 ------
include/configs/ts4600.h | 58 -----------
8 files changed, 360 deletions(-)
delete mode 100644 board/technologic/ts4600/Kconfig
delete mode 100644 board/technologic/ts4600/MAINTAINERS
delete mode 100644 board/technologic/ts4600/Makefile
delete mode 100644 board/technologic/ts4600/iomux.c
delete mode 100644 board/technologic/ts4600/ts4600.c
delete mode 100644 configs/ts4600_defconfig
delete mode 100644 include/configs/ts4600.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index ce81eeb38d46..34aae07d4222 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -11,9 +11,6 @@ choice
config TARGET_BG0900
bool "Support bg0900"
-config TARGET_TS4600
- bool "Support TS4600"
-
config TARGET_XEA
bool "Support XEA"
@@ -24,6 +21,5 @@ config SYS_SOC
source "board/liebherr/xea/Kconfig"
source "board/ppcag/bg0900/Kconfig"
-source "board/technologic/ts4600/Kconfig"
endif
diff --git a/board/technologic/ts4600/Kconfig b/board/technologic/ts4600/Kconfig
deleted file mode 100644
index d0dc2e1b7340..000000000000
--- a/board/technologic/ts4600/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TS4600
-
-config SYS_BOARD
- default "ts4600"
-
-config SYS_VENDOR
- default "technologic"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "ts4600"
-
-endif
diff --git a/board/technologic/ts4600/MAINTAINERS b/board/technologic/ts4600/MAINTAINERS
deleted file mode 100644
index 6f683b5995ef..000000000000
--- a/board/technologic/ts4600/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TS4600 BOARD
-M: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
-S: Maintained
-F: board/technologic/ts4600/
-F: include/configs/ts4600.h
-F: configs/ts4600_defconfig
diff --git a/board/technologic/ts4600/Makefile b/board/technologic/ts4600/Makefile
deleted file mode 100644
index ddf4a8ee1eeb..000000000000
--- a/board/technologic/ts4600/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2016 Savoir-faire Linux
-
-ifndef CONFIG_SPL_BUILD
-obj-y := ts4600.o
-else
-obj-y := iomux.o
-endif
diff --git a/board/technologic/ts4600/iomux.c b/board/technologic/ts4600/iomux.c
deleted file mode 100644
index 9bd3eacb0bdc..000000000000
--- a/board/technologic/ts4600/iomux.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Savoir-faire Linux Inc.
- *
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- *
- * Based on work from TS7680 code by:
- * Kris Bahnsen <kris@embeddedarm.com>
- * Mark Featherston <mark@embeddedarm.com>
- * https://github.com/embeddedarm/u-boot/tree/master/board/technologic/ts7680
- *
- * Derived from MX28EVK code by
- * Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* DUART */
- MX28_PAD_PWM0__DUART_RX,
- MX28_PAD_PWM1__DUART_TX,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* MMC0 slot power enable */
- MX28_PAD_PWM3__GPIO_3_28 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
- /* EMI */
- MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-};
-
-#define HW_DRAM_CTL29 (0x74 >> 2)
-#define CS_MAP 0xf
-#define COLUMN_SIZE 0x2
-#define ADDR_PINS 0x1
-#define APREBIT 0xa
-
-#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \
- ADDR_PINS << 8 | APREBIT)
-
-#define HW_DRAM_CTL39 (0x9c >> 2)
-#define TFAW 0xb
-#define TDLL 0xc8
-
-#define HW_DRAM_CTL39_CONFIG (TFAW << 24 | TDLL)
-
-#define HW_DRAM_CTL41 (0xa4 >> 2)
-#define TPDEX 0x2
-#define TRCD_INT 0x4
-#define TRC 0xd
-
-#define HW_DRAM_CTL41_CONFIG (TPDEX << 24 | TRCD_INT << 8 | TRC)
-
-#define HW_DRAM_CTL42 (0xa8 >> 2)
-#define TRAS_MAX 0x36a6
-#define TRAS_MIN 0xa
-
-#define HW_DRAM_CTL42_CONFIG (TRAS_MAX << 8 | TRAS_MIN)
-
-#define HW_DRAM_CTL43 (0xac >> 2)
-#define TRP 0x4
-#define TRFC 0x27
-#define TREF 0x2a0
-
-#define HW_DRAM_CTL43_CONFIG (TRP << 24 | TRFC << 16 | TREF)
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
- dram_vals[HW_DRAM_CTL39] = HW_DRAM_CTL39_CONFIG;
- dram_vals[HW_DRAM_CTL41] = HW_DRAM_CTL41_CONFIG;
- dram_vals[HW_DRAM_CTL42] = HW_DRAM_CTL42_CONFIG;
- dram_vals[HW_DRAM_CTL43] = HW_DRAM_CTL43_CONFIG;
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
diff --git a/board/technologic/ts4600/ts4600.c b/board/technologic/ts4600/ts4600.c
deleted file mode 100644
index 0ef306d58a27..000000000000
--- a/board/technologic/ts4600/ts4600.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Savoir-faire Linux Inc.
- *
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- *
- * Based on work from TS7680 code by:
- * Kris Bahnsen <kris@embeddedarm.com>
- * Mark Featherston <mark@embeddedarm.com>
- * https://github.com/embeddedarm/u-boot/tree/master/board/technologic/ts7680
- *
- * Derived from MX28EVK code by
- * Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
- /* IO1 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK1, 480000);
-
- /* SSP0 clocks at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-static int ts4600_mmc_cd(int id)
-{
- return 1;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- int ret;
-
- mxs_iomux_setup_pad(MX28_PAD_PWM3__GPIO_3_28);
-
- /* Power-on SD */
- gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 1);
- udelay(1000);
- gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
- /* SD card */
- ret = mxsmmc_initialize(bis, 0, NULL, ts4600_mmc_cd);
- if(ret != 0) {
- printf("SD controller initialized with %d\n", ret);
- }
-
- return ret;
-}
-#endif
-
-int checkboard(void)
-{
- puts("Board: TS4600\n");
-
- return 0;
-}
diff --git a/configs/ts4600_defconfig b/configs/ts4600_defconfig
deleted file mode 100644
index 806cbc668426..000000000000
--- a/configs/ts4600_defconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x40000
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_TS4600=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_CONS_INDEX=0
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/ts4600.h b/include/configs/ts4600.h
deleted file mode 100644
index ae9352f5b9ad..000000000000
--- a/include/configs/ts4600.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2016 Savoir-faire Linux Inc.
- *
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- *
- * Derived from MX28EVK code by
- * Fabio Estevam <fabio.estevam@freescale.com>
- * Freescale Semiconductor, Inc.
- *
- * Configuration settings for the TS4600 Board
- */
-#ifndef __CONFIGS_TS4600_H__
-#define __CONFIGS_TS4600_H__
-
-/* U-Boot Commands */
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-
-/* Environment is in MMC */
-
-/* Boot Linux */
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr=0x41000000\0" \
- "loadkernel=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} imx28-ts4600.dtb\0" \
- "loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot.ub\0" \
- "bootscript=echo Running bootscript from mmc...; " \
- "setenv mmcdev 0; " \
- "setenv mmcpart 2; " \
- "run loadbootscript && source ${loadaddr}; \0" \
- "sdboot=echo Booting from SD card ...; " \
- "setenv mmcdev 0; " \
- "setenv mmcpart 2; " \
- "setenv root /dev/mmcblk0p3; " \
- "run loadkernel && run loadfdt; \0" \
- "startbootsequence=run bootscript || run sdboot \0" \
-
-#define CONFIG_BOOTCOMMAND \
- "mmc rescan; " \
- "run startbootsequence; " \
- "setenv cmdline_append console=ttyAMA0,115200; " \
- "setenv bootargs root=${root} rootwait rw ${cmdline_append}; " \
- "bootz ${loadaddr} - ${fdt_addr}; "
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_TS4600_H__ */
--
2.17.1
next prev parent reply other threads:[~2021-02-09 13:03 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 13:02 [PATCH 01/25] arm: Remove xfi3 board Tom Rini
2021-02-09 13:02 ` [PATCH 02/25] arm: Remove mx23evk board Tom Rini
2021-02-18 3:08 ` Fabio Estevam
2021-02-09 13:02 ` [PATCH 03/25] arm: Remove MX23_OLINUXINO board Tom Rini
2021-02-09 13:02 ` [PATCH 04/25] arm: Remove SANSA_FUZE_PLUS board Tom Rini
2021-02-09 13:02 ` [PATCH 05/25] arm: imx: Remove MX23 support Tom Rini
2021-02-09 16:15 ` Stefano Babic
2021-02-09 13:02 ` [PATCH 06/25] arm: Remove mx28evk board Tom Rini
2021-02-09 13:11 ` Lukasz Majewski
2021-02-09 13:34 ` Tom Rini
2021-02-13 14:19 ` Fabio Estevam
2021-02-09 13:02 ` [PATCH 07/25] arm: Remove apx4devkit board Tom Rini
2021-02-09 13:08 ` [ADDRESS CONVERTED] " Lauri Hintsala
2021-02-09 13:41 ` Tom Rini
2021-02-10 5:29 ` Lauri Hintsala
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 08/25] arm: Remove sc_sps_1 board Tom Rini
2021-02-09 13:03 ` Tom Rini [this message]
2021-02-09 13:03 ` [PATCH 10/25] arm: Remove mx35pdk board Tom Rini
2021-02-09 16:13 ` Stefano Babic
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 11/25] arm: Remove apf27 board Tom Rini
2021-02-09 13:03 ` [PATCH 12/25] arm: Remove mx25pdk board Tom Rini
2021-02-09 13:03 ` [PATCH 13/25] arm: Remove openrd board Tom Rini
2021-02-09 13:03 ` [PATCH 14/25] arm: Remove sheevaplug board Tom Rini
2021-02-10 7:07 ` Chris Packham
2021-02-10 20:09 ` Rick Thomas
2021-02-10 20:15 ` Tom Rini
2021-02-11 0:53 ` Rick Thomas
2021-02-11 1:01 ` Rick Thomas
2021-02-11 1:55 ` Tom Rini
2021-02-11 2:40 ` Rick Thomas
2021-02-11 4:57 ` Vagrant Cascadian
2021-02-11 5:09 ` Rick Thomas
2021-02-11 20:06 ` Tom Rini
2021-03-24 21:11 ` Harm Berntsen
2021-03-24 21:22 ` Tom Rini
2021-03-24 21:54 ` Harm Berntsen
2021-03-24 22:08 ` Tom Rini
2021-02-09 13:03 ` [PATCH 15/25] arm: Remove 32bit vexpress boards Tom Rini
2021-02-09 13:03 ` [PATCH 16/25] arm: Remove gwventana boards Tom Rini
2021-02-10 17:29 ` Tim Harvey
2021-02-10 17:31 ` Tom Rini
2021-02-17 18:26 ` Tim Harvey
2021-02-17 18:35 ` Tom Rini
2021-02-22 17:24 ` Tim Harvey
2021-02-22 17:40 ` Tom Rini
2021-02-23 17:38 ` Tim Harvey
2021-03-02 17:25 ` Simon Glass
2021-02-09 13:03 ` [PATCH 17/25] arm: Remove secomx6quq7 board Tom Rini
2021-02-09 13:03 ` [PATCH 18/25] arm: Remove ls2080a_simu board Tom Rini
2021-02-11 10:27 ` Priyanka Jain
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 19/25] arm: Remove s32v234evb board Tom Rini
2021-02-09 13:03 ` [PATCH 20/25] arm: Remove bcm958712k board Tom Rini
2021-02-09 13:03 ` [PATCH 21/25] arm: Remove wb45n board Tom Rini
2021-02-09 13:03 ` [PATCH 22/25] arm: Remove wb50n board Tom Rini
2021-02-09 13:03 ` [PATCH 23/25] arm: Remove picosam9g45 board Tom Rini
2021-02-09 13:03 ` [PATCH 24/25] arm: Remove db-88f6281-bp board Tom Rini
2021-02-10 6:52 ` Chris Packham
2021-02-15 15:43 ` Tom Rini
2021-02-09 13:03 ` [PATCH 25/25] arm: Remove warp board Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209130317.14883-9-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox