From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 14/16] boards: Disable CMD_SATA on platforms that no longer have a SATA driver enabled
Date: Tue, 9 Feb 2021 21:42:55 -0500 [thread overview]
Message-ID: <20210210024257.20193-14-trini@konsulko.com> (raw)
In-Reply-To: <20210210024257.20193-1-trini@konsulko.com>
There are a number of platforms that depend on a SATA driver that has
been converted to require AHCI but the platforms themselves are behind
on other migrations that would make it trivial to enable AHCI. Disable
SATA in these cases.
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 2 --
arch/powerpc/cpu/mpc85xx/Kconfig | 20 -------------------
configs/MPC8315ERDB_defconfig | 1 -
configs/MPC837XERDB_SLAVE_defconfig | 1 -
configs/MPC837XERDB_defconfig | 1 -
configs/cgtqmx6eval_defconfig | 1 -
...trolcenterd_36BIT_SDCARD_DEVELOP_defconfig | 1 -
configs/controlcenterd_36BIT_SDCARD_defconfig | 1 -
configs/udoo_defconfig | 1 -
include/configs/udoo.h | 1 -
10 files changed, 30 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index f34acf7fa7f5..b19c3cefabab 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -79,8 +79,6 @@ config TARGET_MPC837XEMDS
bool "Support MPC837XEMDS"
select ARCH_MPC837X
select BOARD_EARLY_INIT_F
- imply CMD_SATA
- imply FSL_SATA
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 870ab800e86b..4d3d310d07b4 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -45,7 +45,6 @@ config TARGET_P5040DS
select PHYS_64BIT
select ARCH_P5040
select BOARD_LATE_INIT if CHAIN_OF_TRUST
- imply CMD_SATA
imply PANIC_HANG
config TARGET_MPC8541CDS
@@ -75,7 +74,6 @@ config TARGET_P1010RDB_PA
select SUPPORT_SPL
select SUPPORT_TPL
imply CMD_EEPROM
- imply CMD_SATA
imply PANIC_HANG
config TARGET_P1010RDB_PB
@@ -85,7 +83,6 @@ config TARGET_P1010RDB_PB
select SUPPORT_SPL
select SUPPORT_TPL
imply CMD_EEPROM
- imply CMD_SATA
imply PANIC_HANG
config TARGET_P1020RDB_PC
@@ -154,7 +151,6 @@ config TARGET_T1040RDB
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
- imply CMD_SATA
imply PANIC_HANG
config TARGET_T1040D4RDB
@@ -163,7 +159,6 @@ config TARGET_T1040D4RDB
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
- imply CMD_SATA
imply PANIC_HANG
config TARGET_T1042RDB
@@ -172,7 +167,6 @@ config TARGET_T1042RDB
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
- imply CMD_SATA
config TARGET_T1042D4RDB
bool "Support T1042D4RDB"
@@ -180,7 +174,6 @@ config TARGET_T1042D4RDB
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
- imply CMD_SATA
imply PANIC_HANG
config TARGET_T1042RDB_PI
@@ -189,7 +182,6 @@ config TARGET_T1042RDB_PI
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
- imply CMD_SATA
imply PANIC_HANG
config TARGET_T2080QDS
@@ -528,10 +520,8 @@ config ARCH_P1010
imply CMD_EEPROM
imply CMD_MTDPARTS
imply CMD_NAND
- imply CMD_SATA
imply CMD_PCI
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_P1011
bool
@@ -791,9 +781,7 @@ config ARCH_P5020
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_ELBC
- imply CMD_SATA
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_P5040
bool
@@ -816,9 +804,7 @@ config ARCH_P5040
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_ELBC
- imply CMD_SATA
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_QEMU_E500
bool
@@ -886,9 +872,7 @@ config ARCH_T1040
select FSL_IFC
imply CMD_MTDPARTS
imply CMD_NAND
- imply CMD_SATA
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_T1042
bool
@@ -910,9 +894,7 @@ config ARCH_T1042
select FSL_IFC
imply CMD_MTDPARTS
imply CMD_NAND
- imply CMD_SATA
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_T2080
bool
@@ -985,10 +967,8 @@ config ARCH_T4160
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_IFC
- imply CMD_SATA
imply CMD_NAND
imply CMD_REGINFO
- imply FSL_SATA
config ARCH_T4240
bool
diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig
index f03fec92f867..1a8983584e9e 100644
--- a/configs/MPC8315ERDB_defconfig
+++ b/configs/MPC8315ERDB_defconfig
@@ -118,7 +118,6 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
diff --git a/configs/MPC837XERDB_SLAVE_defconfig b/configs/MPC837XERDB_SLAVE_defconfig
index ea84564d9af8..388779bec1c3 100644
--- a/configs/MPC837XERDB_SLAVE_defconfig
+++ b/configs/MPC837XERDB_SLAVE_defconfig
@@ -111,7 +111,6 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig
index 0d8ec8e9cafd..4c3076bb54b6 100644
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@@ -152,7 +152,6 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig
index 26f74662f80a..e92dcb637c8d 100644
--- a/configs/cgtqmx6eval_defconfig
+++ b/configs/cgtqmx6eval_defconfig
@@ -37,7 +37,6 @@ CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig
index 41785d09d0fc..4414563f1875 100644
--- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig
+++ b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig
@@ -24,7 +24,6 @@ CONFIG_CMD_EEPROM=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_MII=y
diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig
index 777f5aee41f8..24f7a8dbffeb 100644
--- a/configs/controlcenterd_36BIT_SDCARD_defconfig
+++ b/configs/controlcenterd_36BIT_SDCARD_defconfig
@@ -24,7 +24,6 @@ CONFIG_CMD_EEPROM=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_MII=y
diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig
index f72b9645dac3..d70a6ca41ce1 100644
--- a/configs/udoo_defconfig
+++ b/configs/udoo_defconfig
@@ -24,7 +24,6 @@ CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
-CONFIG_CMD_SATA=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_OVERWRITE=y
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index b4fbf8c6383d..e250c7e9d922 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -65,7 +65,6 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
- func(SATA, sata, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
--
2.17.1
next prev parent reply other threads:[~2021-02-10 2:42 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 2:42 [PATCH 01/16] ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI Tom Rini
2021-02-10 2:42 ` [PATCH 02/16] am57xx_hs_evm_usb: Enable AHCI and BLK Tom Rini
2021-04-12 0:24 ` Tom Rini
2021-02-10 2:42 ` [PATCH 03/16] ata: DWC_AHSATA depends on BLK Tom Rini
2021-04-12 0:25 ` Tom Rini
2021-02-10 2:42 ` [PATCH 04/16] ppc: configs: Remove a few non-updated build configurations Tom Rini
2021-02-10 2:42 ` [PATCH 05/16] arm: Remove highbank board Tom Rini
2021-02-19 13:04 ` André Przywara
2021-02-19 13:30 ` Tom Rini
2021-02-10 2:42 ` [PATCH 06/16] arm: Remove dms-ba16 board Tom Rini
2021-04-12 0:25 ` Tom Rini
2021-02-10 2:42 ` [PATCH 07/16] arm: Remove ot1200 board Tom Rini
2021-02-17 9:58 ` Christian Gmeiner
2021-03-01 14:47 ` Christian Gmeiner
2021-04-12 0:25 ` Tom Rini
2021-02-10 2:42 ` [PATCH 08/16] arm: Remove mx53loco board Tom Rini
2021-02-13 14:14 ` Fabio Estevam
2021-02-13 16:14 ` Tom Rini
2021-02-14 1:53 ` Fabio Estevam
2021-02-10 2:42 ` [PATCH 09/16] ppc: Remove MPC8349ITX board Tom Rini
2021-04-12 0:25 ` Tom Rini
2021-02-10 2:42 ` [PATCH 10/16] ppc: Remove MPC8544DS board Tom Rini
2021-02-11 10:34 ` Priyanka Jain
2021-02-15 15:44 ` Tom Rini
2021-02-10 2:42 ` [PATCH 11/16] ppc: Remove MPC8572DS board Tom Rini
2021-02-11 10:34 ` Priyanka Jain
2021-02-15 15:44 ` Tom Rini
2021-02-10 2:42 ` [PATCH 12/16] ppc: Remove MPC8610HPCD board Tom Rini
2021-02-11 10:33 ` Priyanka Jain
2021-02-15 15:44 ` Tom Rini
2021-02-10 2:42 ` [PATCH 13/16] ppc: Remove MPC8641HPCN board Tom Rini
2021-02-11 10:33 ` Priyanka Jain
2021-02-15 15:44 ` Tom Rini
2021-02-10 2:42 ` Tom Rini [this message]
2021-02-10 2:42 ` [PATCH 15/16] drivers: ata: Remove mvsata_ide driver Tom Rini
2021-04-12 0:25 ` Tom Rini
2021-02-10 2:42 ` [PATCH 16/16] ata: Make LIBATA means AHCI is enabled mandatory Tom Rini
2021-04-12 0:24 ` [PATCH 01/16] ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210024257.20193-14-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox